03-10-2009
The system should handle very basic routes like that. You have a very old Solaris and I can't test stuff on a Solaris that old. If it's not working, post your routing table. "netstat -nrv" should show it. If your old Solaris doesn't like that, try "netstat -nr".
9 More Discussions You Might Find Interesting
1. IP Networking
hi,
below is the situation:
my server is in 128.10.200.xxx network.
i have a solaris computer running in a subnet. this computer got 2 nic card.
1 is 172.18.198.xxx , another 1 is 10.100.xxx.11
there is a machine stick with this computer, ip is 10.100.xxx.12
so, 10.100.xxx.11 and... (3 Replies)
Discussion started by: kyhah
3 Replies
2. Solaris
Hi All, :(:confused:
I have scoured the web and can't find this anywhere.
What I am trying to do is set up a static route through an available gateway on a server, and then test connectivity through TELNET.
I have done this on AIX (I already had this procedure).
On AIX I would use SMIT. ... (7 Replies)
Discussion started by: jeffpas
7 Replies
3. Solaris
Does anyone know how to delete a an ip off the routing table ? i tried route delete 10.0.0.0 and gateway but it still comes back. i have 2 zones sharing one interface. help... (4 Replies)
Discussion started by: 23patrick
4 Replies
4. IP Networking
hi all,
how do i make sure that the new routing should take effect on the os memory right away? what should i run after i add all the new "route add ....".
I have an example below:
bash-2.03# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface... (1 Reply)
Discussion started by: itik
1 Replies
5. Solaris
Hi,
I got problem of Sun Solaris 8 routing.
IP of SunA is 10.16.64.164, and have routing table:
10.16.64.0 10.16.64.164 U 1 19236 bge1
10.6.0.0 10.6.0.3 U 1 16534 bge0
224.0.0.0 10.6.0.3 U 1 ... (4 Replies)
Discussion started by: milo
4 Replies
6. IP Networking
ce0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2
inet 10.162.212.132 netmask ffffff00 broadcast 10.162.212.255
ether 0:14:4f:55:82:9
ce1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3
inet 10.231.11.232 netmask... (1 Reply)
Discussion started by: busyboy
1 Replies
7. Solaris
ce0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2
inet 10.162.212.132 netmask ffffff00 broadcast 10.162.212.255
ether 0:14:4f:55:82:9
ce1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3
inet 10.231.11.232 netmask... (3 Replies)
Discussion started by: busyboy
3 Replies
8. UNIX for Advanced & Expert Users
Hello
Hope someone can help with this problem. We are running Solaris 10 with a current kernel patch of 142900-09.
We appear to be getting a serious issue with the routing table as shown below:
Output from netstat -rnv
Destination ....Mask ............Gateway ........Device... (2 Replies)
Discussion started by: gregsih
2 Replies
9. Solaris
Hello All,
Problem is that redundancy doesn't work, probably a routing issue I need to get sorted out When 172.29.11.x net is down, neither node3 nor node4 is trying 172.29.12.x network,The problem lies in network 172.29.13.x
if 172.29.11.x network is down, node3/node4 should route to... (6 Replies)
Discussion started by: nadeemahmed
6 Replies
LEARN ABOUT DEBIAN
essidscan
ESSIDSCAN(8) Commands ESSIDSCAN(8)
NAME
essidscan - scan for ESSID corresponding to available WLAN access points
SYNOPSIS
In /etc/network/interfaces:
mapping <interface> script essidscan
DESCRIPTION
The essidscan utility is used to tell the ifup and ifdown utilities about the current SSID of the WLAN currently being accessed. It can be
used to map the SSID name to an iface stanza.
CONFIGURATION
A sample /etc/network/interfaces may look like this:
mapping hotplug
script /etc/network/essidscan
map SSIDONE wlan-work
map SSIDTWO wlan-work
map HOME
iface wlan-work inet dhcp
wireless-key 1234-5678-9ABC-DEF0-1234-5678-9A
wireless-keymode restricted
iface HOME inet static
address 192.168.2.4
netmask 255.255.255.0
gateway 192.168.2.1
wireless-essid HOME
wireless-key s:somepassword
wireless-keymode open
iface DEFAULT inet dhcp
FILES
/etc/network/interfaces
the interfaces definition file
/etc/network/run/ifstate
a record of the current state of the interfaces, managed by ifup and ifdown
SEE ALSO
interfaces(5) ifscheme(8) ifup(8) ifdown(8)
AUTHORS
Tor Slettnes <tor@slett.net>
ESSIDSCAN(8)