03-10-2009
Thanks for you reply.I checked the commands, everything looks fine. The thing is the the server is no longer in this state. It was recovered using metareplace commands etc. I don't believe it was a hardware error as it occured on several severs over a perid of time. But I wiuld like to find the root cause of the error.
10 More Discussions You Might Find Interesting
1. Solaris
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i... (3 Replies)
Discussion started by: deal732
3 Replies
2. Solaris
solaris os run on X86.
bootdisk have been mirrored.but there is one disk miss,I want to replace the fail disk,but after I replace the disk,the system can't boot!
pls help! (2 Replies)
Discussion started by: netxjman
2 Replies
3. Solaris
I installed Solaris 10 on this Dell 5150 with only 1 SATA hard drive setup, all went well, and I could view the disk in the disk management window.
However, I setup a 2nd hard drive, identical to 1st drive. Solaris wont recognize it and gives an error when trying to view disks in disk management... (5 Replies)
Discussion started by: Joncamp
5 Replies
4. UNIX for Dummies Questions & Answers
Hi Guys,
I'm looking for a way to monitor disk health/status for a Solaris 5.8 sparc machine. I'm looking for something similar to LSIutility or MegaCLI.
Any suggestions?
Output of `modinfo`:
30 102616fb 10be8 118 1 ssd (SCSI SSA/FCAL Disk Driver 1.151)
122 7821c000 18550 32 1 ... (2 Replies)
Discussion started by: tank126
2 Replies
5. Solaris
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
Discussion started by: ramareddi16
1 Replies
6. Solaris
Hi all,
I guess most of you have seen this error message while installing Solaris 10 on an x86 platform. I got the error message while installing from DVD ISO on my home VMWare ESXi server.
It took me a long time to figure the exact issue and a subsequent solution. the solution is very... (1 Reply)
Discussion started by: admin_xor
1 Replies
7. Solaris
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /
... (0 Replies)
Discussion started by: fretagi
0 Replies
8. Solaris
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /... (4 Replies)
Discussion started by: fretagi
4 Replies
9. Solaris
Hi all,
OS is Solaros 10 Sparc
While doing Netbackup upgradation to 7.5 , the server was asked to reboot.
But then it came up in single user mode,
and after I typed format command it showed some disk error.
bash-3.00# format
Searching for disks...WARNING:... (2 Replies)
Discussion started by: manalisharmabe
2 Replies
10. Solaris
Hello,
We are running solaris 8 and there is a disk having problem with consistency
The following devices (soft partitions from NetApp are inconsistent, unable to be repaired with fsck and need to be restored:
root@server1 # df -k
Filesystem kbytes used ... (4 Replies)
Discussion started by: gull05
4 Replies
KILL(1) General Commands Manual KILL(1)
NAME
kill, broke - print commands to kill processes
SYNOPSIS
kill name
broke
DESCRIPTION
Kill prints commands that will cause all processes called name and owned by the current user to be terminated. Use the send command of
81/2(1), or pipe the output of kill into rc(1) to execute the commands.
Kill suggests sending a kill note to the process; the same message delivered to the process's ctl file (see proc(3)) is a surer, if heavy
handed, kill, but is necessary if the offending process is ignoring notes.
Broke prints commands that will cause all processes in the Broken state and owned by the current user to go away. When a process dies
because of an error caught by the system, it may linger in the Broken state to allow examination with a debugger. Executing the commands
printed by broke lets the system reclaim the resources used by the broken processes.
SOURCE
/rc/bin/kill
/rc/bin/broke
SEE ALSO
ps(1), stop(1), proc(3)
KILL(1)