Two ways. Say the new ip address is 192.168.20.1 and the device to be associated with it is eth0
The other way is the new "ip route2" tools, or just "iproute".
Saving this configuration for future use is a separate question and depends greatly on the distribution.
i am running solaris 9 i now how to create virtual ip address but how do i keep them so when the server reboots they are still there?...THANX (2 Replies)
Hello,
I would like to know if there is a command or any configuration file to find and differentiate the Virtual IP Addresses (of the Cluster Resource Group) and the IP Address of the Cluster Node. I observe that the ifconfig -a command returns all the IP addresses configured on the ... (1 Reply)
Hi Folks,
I want to check all the virtual hostname's/IP's of a host/ip. Currently we are using HP-UX and open SuSe. Please tell me the command to list out all virtual names of a particular host.
many thanks in advance. (2 Replies)
Do we have any Virtual Data Center software as we have Virtual Machine?
I want to practice everything of Solaris practically but i don't have resources like data center which includes Servers, Data storages, switches, and other things. (2 Replies)
Not really a newbie, but I have a strange problem and I'm not sure how to further troubleshoot it.
I have to log out of a virtual terminal by typing exit, then exit again as in:
woodnt@toshiba-laptop ~ $ exit
logout
woodnt@toshiba-laptop ~ $ exit
logout
I DON'T have to do this when I'm... (1 Reply)
Hi all,
I am new to Linux kernel/user space programming having been an assembly programmer in my previous life. I am now using 2.6.x kernel on an embedded CPU that has a few dedicated hardware blocks (including more CPU running just C-code, i.e., no operating system).
There is a single DRAM... (1 Reply)
Trying to set or modify the randomly set hostID of a Solaris 10 virtual/guest machine that I installed on a Windows-XP host machine (using Virtual Box 4.1.12).
I was able to set/modify the hostname of the Solaris 10 virtual/guest machine during installation as well as via the Virtual Box... (4 Replies)
My RHEL virtual Machine Does not have Virtual Machine Manager Desktop Tool
Hi,
I don't seem to have the Virtual Machine Manager Desktop tool set up on my RHEL6 Machine. The Linux machine runs off VMWare player and I'm not sure whether it is a VMWare software issue or a problem with the RHEL6... (2 Replies)
Hi All,
Is there any way I can prioritize my VMs when there is resource crunch in host machine so that some VMs will be allocated more vcpu, more memory than other VMs in kvm/qemu hypervisor based virtual machines?
Lets say in my cloud environment my Ubuntu 16 compute hosts are running some... (0 Replies)
Discussion started by: SanjayK
0 Replies
LEARN ABOUT SUSE
ifndp-proxy
IFNDP-PROXY(5) Network configuration IFNDP-PROXY(5)NAME
ifndp-proxy[-<interface name>] - IPv6 NDP and IPv4 ARP proxy entries
SYNOPSIS
/etc/sysconfig/network/ifndp-proxy
/etc/sysconfig/network/ifndp-proxy-<interface name>
DESCRIPTION
These files contain IPv6 NDP and IPv4 ARP proxy settings, that should be applied using the ip neigh add proxy command documented in the
ip(8) manual page that provides a common interface for IPv4 and IPv6.
The NDP/ARP proxy is required, e.g. when IP addresses from the same subnet have to be used on the interface of the host as well as on
interfaces behind a (tunnel) interface and using a bridge is not an option.
Don't forget to enable forwarding and the NDP/ARP proxy by setting
net.ipv6.conf.<all|default|interface name>.proxy_ndp = 1
net.ipv6.conf.<all|default|interface name>.forwarding = 1
and/or
net.ipv4.conf.<all|default|interface name>.proxy_arp = 1
net.ipv4.conf.<all|default|interface name>.forwarding = 1
or
net.ipv4.ip_forward = 1
either as global all setting in the /etc/sysctl.conf file or using the ifsysctl(5) files, that allow per-interface setup.
Forwarding can be also enabled in the /etc/sysconfig/sysctl file using the IP_FORWARD and IPV6_FORWARD variables.
The proxy entries are added and deleted using the if-{up|down}.d/ndp-proxy script, every time after an involved interface has been set
up or down.
SYNTAX
The format of the ifndp-proxy file is:
<address> <address interface> <proxy interface list>
The format of the ifndp-proxy-<address interface> file is same to above, but allows also to omit the address interface by using a "-" as
placeholder inside of the file, because it is already available in the file name:
<address> <address interface | -> <proxy interface list>
Lines beginning with # and blank lines are ignored.
Each line defines to add a proxy NDP/ARP entry with the address of or behind address interface to all interfaces in the proxy interface
list.
EXAMPLES
Let's assume, your machine is connected via eth0 to a switch with the networks 2001:db8:abba::/64 and 192.168.100.1/24 and is using the IP
address 1 itself. You'd like to use the addresses 11 and 12 e.g. for virtual machines behind the tap1 and tap2 interface, that is:
2001:db8:abba::1/64 -- local eth0 address
2001:db8:abba::11/64 -- address behind tap1
2001:db8:abba::12/64 -- address behind tap2
192.168.100.1/24 -- local eth0 address
192.168.100.11/24 -- address behind tap1
192.168.100.12/24 -- address behind tap2
then set up the following entries in the ifndp-proxy file:
2001:db8:abba::1 eth0 tap1 tap2
2001:db8:abba::11 tap1 eth0 tap2
2001:db8:abba::12 tap2 eth0 tap1
192.168.100.1 eth0 tap1 tap2
192.168.100.11 tap1 eth0 tap2
192.168.100.12 tap2 eth0 tap1
additionally to the routing entries in the routes or ifroute-<interface name> files.
BUGS
Please report bugs at <https://bugzilla.novell.com/>
AUTHOR
Marius Tomaschewski <mt@suse.de>
SEE ALSO ifup(8)ifcfg(5)ifsysctl(8)sysconfig December 2009 IFNDP-PROXY(5)