03-04-2009
Reg. VXVM
Hi Guys,
I have a doubt either to Reboot the server after Replacing the disk0.
I have two disks under vxvm root mirrored and i had a problem with primary disk so i replace the disk0 failed primary disk and then mirrored. After mirroring is it reboot required ?
10 More Discussions You Might Find Interesting
1. Solaris
All solaris rescue gurus out there ....
I've a Solaris 2.6 E450 on which my sysadmin guy has deleted every file (not sub-directories) from the /etc directory.
The machine is (was) running Vxvm with the root volume encapsulated.
I've tried booting from CDROM, mounting the root volume... (3 Replies)
Discussion started by: andy11983
3 Replies
2. Filesystems, Disks and Memory
I've got a Linux box that I'm pretty sure is having some disk issues. iostat isn't installed, but vmstat is, so i've been trying to use that to do some initial diagnostics while I go through our company's change control process to get iostat installed.
The problem I'm having is that the disks... (4 Replies)
Discussion started by: kknigga
4 Replies
3. Solaris
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 sliced rootdisk rootdg online
c1t1d0s2 sliced disk01 rootdg online
c2t0d0s2 sliced actsvr101 actsvr1dg online
c2t2d0s2 sliced actsvr102 actsvr1dg online
c2t3d0s2 ... (13 Replies)
Discussion started by: incredible
13 Replies
4. Solaris
Hi,
Quick question if anyone knows this. Is there a command I can use in Veritas Volume manager on Solaris that will tell me what the name of the SAN I am connected to? We have a number of SANs so I am unsure which one my servers are connected to. Thanks. (13 Replies)
Discussion started by: gwhelan
13 Replies
5. Filesystems, Disks and Memory
:confused:
Last week I read that VxVM won't work with MPxIO (i don't recall the link) and that it should be unconfigured when installing VxVM. Today I read that VxVM works in "pass-thru" mode with MPxIO and DMP uses the devices presented by MPxIO.
If I create disks with MPxIO and use VxVM to... (1 Reply)
Discussion started by: bluescreen
1 Replies
6. Solaris
Hi community,
I've a hard question for you.
1)What are the differences between ZFS and Veritas Volume Manager on Solaris10?
2) what is the difference to manage the internal disks (Mirror)?
3) what is the difference to manage the external disks?
4) What is the difference to manage... (5 Replies)
Discussion started by: Sunb3
5 Replies
7. Solaris
Anyone knows that how many volumes can be created in a Diskgroup?
Thanks in advance... (1 Reply)
Discussion started by: bpsunadm
1 Replies
8. Solaris
hi all,
how can we check whether vxvm is installed in our system or not in solaris?
Thanks in advance
dinu (4 Replies)
Discussion started by: dinu
4 Replies
9. Emergency UNIX and Linux Support
I have VxVM 5.1 running on Solaris-10. I have to increase a application file-system and storage team gave me a lun. After scanning scsi port by cfgadm, I can see them in format output. I labelled it, but I am not able to see them in "vxdisk list".
I already tried commands -->
vxdctl enable... (4 Replies)
Discussion started by: solaris_1977
4 Replies
10. Solaris
Hi,
When we are running fsck in vxvm FS within few sec it will completed even if data is more than 500GB or in TB also.
compare to UFS FS in that it will take more time compare with vxvm.UFS check FS in block level. & then vvxm on where its checking the FS.
Please explain. (1 Reply)
Discussion started by: tiger09
1 Replies
LEARN ABOUT OSF1
volreattach
volreattach(8) System Manager's Manual volreattach(8)
NAME
volreattach - Reattaches disk drives that have once again become accessible
SYNOPSIS
/usr/sbin/volreattach [-rb] [accessname...]
/usr/sbin/volreattach -c accessname
OPTIONS
The volreattach utility has the following options: Calls the volrecover utility to attempt to recover stale plexes of any volumes on the
failed disk. Performs the reattach operation in the background. Checks whether a reattach is possible. No operation is performed, but the
name of the disk group and disk media name at which the disk can be reattached is displayed.
DESCRIPTION
The volreattach utility attempts to reattach disks using the same disk group and media names they had before detachment.
This operation may be necessary if a disk has a transient failure, or if some disk drivers are unloaded or unloadable when the Logical
Storage Manager is started, causing disks to enter the failed state.
If the problem is fixed, the volreattach command can be used to reattach the disks without plexes being flagged as stale, as long as the
reattach happens before any volumes on the disk are started.
The volreattach command is called from the voldiskadm menus as part of disk recovery.
The volreattach utility tries to find a disk with a disk group and disk ID matching that of the disk(s) being reattached. If the matching
disk is found, the reattach operation may still fail if the original cause (or some other cause) for the disk failure still exists.
EXIT CODES
A zero exit status is returned if it is possible to perform a reattach. Otherwise, non-zero is returned.
SEE ALSO
volintro(8), voldiskadm(8), volrecover(8)
volreattach(8)