03-02-2009
There's a number of listings if you search on the error cfgmgr: 0514-621 WARNING. Is this a card you purchased with the system from IBM or an add on? Do you know the card's make/mfgr. ID?
Cheers,
Keith
10 More Discussions You Might Find Interesting
1. Solaris
Hi,
I have a problem with a server disconnecting from the network.
This is a SUN box with dual NIC's running Solaris 8.
We have a Nokia router that routes traffic but it's virtual address doesn't respond to pings. When the SUN box sends out a ping, if nothing comes back it will shut down... (5 Replies)
Discussion started by: m_smith
5 Replies
2. IP Networking
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
Discussion started by: jwholey
0 Replies
3. Solaris
Greetings Forumers!
I am running into an issue with multiple zones on an M5000 with 2 NICs. The NICs are on separate VLANs. These zones are using the 2 NICs to communicate with other systems but when they need to communicate with a zone on the same system, but different NIC, the application... (9 Replies)
Discussion started by: bluescreen
9 Replies
4. AIX
All
I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable:
$ lsnports
name physloc ... (4 Replies)
Discussion started by: johnf
4 Replies
5. Solaris
I couldn't install my nic in solaris 10. I compiled and added
the driver but failed to attach the driver and ifconfig output
shows only loopback dev. Please see the following output and tell
me whether my nic has been detected and why the driver failed to
attach?
My nic is detected in linux... (0 Replies)
Discussion started by: vectrum
0 Replies
6. Red Hat
Dear All
I want tune my NIC's rps, rfs and xps value.
In my system I have two NIC (eth0, eth1) and I have a bond0 ( eth0, eth1).
Here is the question? Which device should I modify ?
eth0 and eth1? or just modify bond0 or modify all device (eth0, eth1, bond0)
Any advice is welcome.... (0 Replies)
Discussion started by: nnnnnnine
0 Replies
7. AIX
Hi,
From the man page, cfgmgr configures devices and optionally installs device software by running the programs specified in the Configuration Rules object class and it is not dependent on platform .
Are there any fundamental differences impacting the speed of cfgmgr on a stand-alone and... (5 Replies)
Discussion started by: Sachin1987
5 Replies
8. AIX
NIC port is down on IBM Frame. From the back its slot C7/C8. The network switch is the problem, and a new switch will be coming into play. There's one VIO and one LPAR.
How do i tell the port is down in the OS on the VIO? And how can i verify it's backup without pulling cables? We have a... (1 Reply)
Discussion started by: gps1976
1 Replies
9. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
10. Linux
Hello Admins,
My ask is how can I add two different subnet IPs to same box with two different gateways?
The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware.
How can I get connected... (4 Replies)
Discussion started by: snchaudhari2
4 Replies
LEARN ABOUT SUNOS
smartcard
smartcard(5) Standards, Environments, and Macros smartcard(5)
NAME
smartcard - overview of smart card features on Solaris
DESCRIPTION
The smart card framework provides a mechanism to abstract the details of interacting with smart cards and smart cardreaders (called card
terminals). The framework is based on the OpenCard Framework V1.1 (OCF) with Sun extensions to allow OCF to operate in a multi-user envi-
ronment. The core OCF software protocol stack is implemented as a system service daemon. This implementation allows smart cards and card
terminals to be shared cooperatively among many different clients on the system while providing access control to the smart card and card
terminal resources on a per-UID basis.
An event dispatcher is provided to inform clients of events occuring on the card and at the card terminal, such as card insertion and card
removal.
A high-level authentication mechanism is provided to allow clients to perform smart card-based authentications without requiring knowledge
of specific card or reader authentication features.
A set of applet administration tools is provided for JavaCards that support downloading Java applets (although applet build tools are not
provided).
Administration of the smart card framework is provided with the smartcard(1M) command line administration utility and the smartcardguiad-
min(1) GUI administration tool.
Support the following card terminal is provided:
o Dallas iButton Serial Reader (see ocf_ibutton(7D))
Additional card terminals can be supported by implementing smart card terminal interfaces in a shared library.
Support for several smart cards is provided:
o Schlumberger Cyberflex Access JavaCard
o Schlumberger MicroPayflex
o Dallas Semiconductor Java iButton JavaCard
Each of the supported cards has a complete set of OCF card services that implement the necessary functionality for authentication and
secure storage of data. For the two supported JavaCards, an authentication and secure data storage applet is provided that can be loaded
into these cards with the supplied applet administration tools. See smartcard(1M).
A PAM smart card module is provided to allow PAM clients to use smart card-based authentication. See pam_smartcard(5)
CDE is able to use the PAM smart card module for dtlogin and dtsession authentication. CDE also uses the smart card framework event dis-
patcher to listen for events on the card terminal and provide corresponding visual feedback to the user.
SEE ALSO
ocfserv(1M), smartcard(1M), libsmartcard(3LIB), pam_start(3PAM), pam_smartcard(5), ocf_ibutton(7D), scmi2c(7D)
SunOS 5.10 16 Oct 2002 smartcard(5)