Parsing of file for Report Generation (String parsing and splitting)
Hey guys,
I have this file generated by me... i want to create some HTML output from it.
The problem is that i am really confused about how do I go about reading the file.
The file is in the following format:
The file can continue this way as long as it wants. The A type (for that matter any type) might be repeated again too.
But there would always be 3 fields for a given type, Time, Result and ExpectedResult.
I need to consolidate all of these values for all the different types (A, B, etc.) and create a tabular report for them.
Oh, yes, forgot to mention.... I'm using a shell based on zsh.
hi
i am new to shelll scripting
I need to parse a string like "abc,def,ghie,jkl"
And assign them to some variables like
hs1 = abc
hs2 = def
hs3 = ghi
hs4 = jkl
Please help (4 Replies)
I need the perl solution for the following :
$string="I LOVE INDIA"
now, in a new string i need the first character of each word...
that is string2 should be "ILN". (10 Replies)
Hi,
name=VDSL_TTV_ HN_SUB create coid=MA5603U phone=5678 portpolicy=APortSelectionPolicy rfu10=TTV rfu3=Dot1q sz7_portmode=VDSL2 rfu5=1234 srprofile.sy_profname=$ADSL_TTV_SubProfile1
I have a line like this. Its a single line.I need the output as
name=VDSL_TTV_ HN_SUB create... (1 Reply)
for i in `cat list`;do lol=`curl -m 2 -s ${i} | grep 'class=info' | cut -d '>' -f14 | cut -d '<' -f1 | sed '/^$/d'`; if ;then echo "$i,$lol" >> dirty; echo "$i,$lol";fi; done
cut: you must specify a list of bytes, characters, or fields
Try `cut --help' for more information.
it gave me that... (0 Replies)
Hi everyone,
I am working on fetchmail + procmail to filter mails and I am having problem with parsing a long line in the body of the email.
Could anyone help me construct a reg exp for this string below. It needs to match exactly as this string.
GetRyt... (4 Replies)
Hello all;
lat week I was able to get some assistance on creating a summary report from a file generated by a "comm" comparison of twp CSV files...turn out now that I am being asked for a detail report as well...this is beyond my knowledge of perl (and yes I have to use perl)..also please keep... (5 Replies)
Hi,
I need some advise on how to print 'sections' of the attached file. I am searching for some that says Marked Corrupt and print some lines after it.
At the moment I am running the command below:
sed -n -e '/Marked Corrupt/{N;N;p;}' rman_list_validate.txtThis gives me the following... (1 Reply)
The log file is huge and lot of information, i would like to parse and make a report .
below is the log file looks like:
REPORT DATE: Mon Aug 10 04:16:17 CDT 2017
SYSTEN VER: v1.3.0.9
TERMINAL TYPE: prod
SYSTEM: nb11cu51
UPTIME: 04:16AM up 182 days 57 mins min
MODEL, TYPE, and SN:... (8 Replies)
Discussion started by: amir07
8 Replies
LEARN ABOUT DEBIAN
hp-setup
hp-setup(1) User Manuals hp-setup(1)NAME
hp-setup - Printer/Fax Setup Utility
DESCRIPTION
Installs HPLIP printers and faxes in the CUPS spooler. Tries to automatically determine the correct PPD file to use. Allows the printing of
a testpage. Performs basic fax parameter setup.
SYNOPSIS
hp-setup [MODE] [OPTIONS] [SERIAL NO.|USB bus:device|IP|DEVNODE]
MODE
Run in graphical UI mode:
-u or --gui (Default)
Run in interactive mode:
-i or --interactive
OPTIONS
Automatic mode:
-a or --auto (-i mode only)
To specify the port on a multi-port JetDirect:
--port=<port> (Valid values are 1*, 2, and 3. *default)
No testpage in automatic mode:
-x (-i mode only)
To specify a CUPS printer queue name:
-p<printer> or --printer=<printer> (-i mode only)
To specify a CUPS fax queue name:
-f<fax> or --fax=<fax> (-i mode only)
Type of queue(s) to install:
-t<typelist> or --type=<typelist>. <typelist>: print*, fax* (*default) (-i mode only)
To specify the device URI to install:
-d<device> or --device=<device> (--qt4 mode only)
Remove printers or faxes instead of setting-up:
-r or --rm or --remove (-u only)
Set the language:
-q <lang> or --lang=<lang>. Use -q? or --lang=? to see a list of available language codes.
Set the logging level:
-l<level> or --logging=<level> <level>: none, info*, error, warn, debug (*default)
Run in debug mode:
-g (same as option: -ldebug)
This help information:
-h or --help
SERIAL NO.|USB ID|IP|DEVNODE
USB bus:device (usb only):
"xxx:yyy" where 'xxx' is the USB bus and 'yyy' is the USB device. (Note: The ':' and all leading zeros must be present.) Use the
'lsusb' command to obtain this information.
IPs (network only):
IPv4 address "a.b.c.d" or "hostname"
DEVNODE (parallel only):
"/dev/parportX", X=0,1,2,...
SERIAL NO. (usb and parallel only):
"serial no."
EXAMPLES
Setup using GUI mode:
$ hp-setup
Setup using GUI mode, specifying usb:
$ hp-setup -b usb
Setup using GUI mode, specifying an IP:
$ hp-setup 192.168.0.101
One USB printer attached, automatic:
$ hp-setup -i -a
USB, IDs specified:
$ hp-setup -i 001:002
Network:
$ hp-setup -i 66.35.250.209
Network, Jetdirect port 2:
$ hp-setup -i --port=2 66.35.250.209
Parallel:
$ hp-setup -i /dev/parport0
USB or parallel, using serial number:
$ hp-setup -i US12345678A
USB, automatic:
$ hp-setup -i --auto 001:002
Parallel, automatic, no testpage:
$ hp-setup -i -a -x /dev/parport0
Parallel, choose device:
$ hp-setup -i -b par
NOTES
1. If no serial number, USB ID, IP, or device node is specified, the USB and parallel busses will be probed for devices.
2. Using 'lsusb' to obtain USB IDs: (example)
$ lsusb
Bus 003 Device 011: ID 03f0:c202 Hewlett-Packard
$ hp-setup --auto 003:011
(Note: You may have to run 'lsusb' from /sbin or another location. Use '$ locate lsusb' to determine this.)
3. Parameters -a, -f, -p, or -t are not valid in GUI (-u) mode.
SEE ALSO
hp-makeuri hp-probe
AUTHOR
HPLIP (Hewlett-Packard Linux Imaging and Printing) is an HP developed solution for printing, scanning, and faxing with HP inkjet and laser
based printers in Linux.
REPORTING BUGS
The HPLIP Launchpad.net site https://launchpad.net/hplip is available to get help, report bugs, make suggestions, discuss the HPLIP project
or otherwise contact the HPLIP Team.
COPYRIGHT
Copyright (c) 2001-14 Hewlett-Packard Development Company, L.P.
This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See
COPYING file for more details.
Linux 9.0 hp-setup(1)