hp-setup(1)							   User Manuals 						       hp-setup(1)

NAME

       hp-setup - Printer/Fax Setup Utility

DESCRIPTION

       Installs HPLIP printers and faxes in the CUPS spooler. Tries to automatically determine the correct PPD file to use. Allows the printing of
       a testpage. Performs basic fax parameter setup.

SYNOPSIS

       hp-setup [MODE] [OPTIONS] [SERIAL NO.|USB bus:device|IP|DEVNODE]

MODE

       Run in graphical UI mode:
	      -u or --gui (Default)

       Run in interactive mode:
	      -i or --interactive

OPTIONS

       Automatic mode:
	      -a or --auto (-i mode only)

       To specify the port on a multi-port JetDirect:
	      --port=<port> (Valid values are 1*, 2, and 3. *default)

       No testpage in automatic mode:
	      -x (-i mode only)

       To specify a CUPS printer queue name:
	      -p<printer> or --printer=<printer> (-i mode only)

       To specify a CUPS fax queue name:
	      -f<fax> or --fax=<fax> (-i mode only)

       Type of queue(s) to install:
	      -t<typelist> or --type=<typelist>. <typelist>: print*, fax* (*default) (-i mode only)

       To specify the device URI to install:
	      -d<device> or --device=<device> (--qt4 mode only)

       Remove printers or faxes instead of setting-up:
	      -r or --rm or --remove (-u only)

       Set the language:
	      -q <lang> or --lang=<lang>. Use -q? or --lang=? to see a list of available language codes.

       Set the logging level:
	      -l<level> or --logging=<level> <level>: none, info*, error, warn, debug (*default)

       Run in debug mode:
	      -g (same as option: -ldebug)

       This help information:
	      -h or --help

SERIAL NO.|USB ID|IP|DEVNODE
       USB bus:device (usb only):
	      "xxx:yyy" where 'xxx' is the USB bus and 'yyy' is the USB device. (Note: The ':' and all leading zeros must be  present.)   Use  the
	      'lsusb' command to obtain this information.

       IPs (network only):
	      IPv4 address "a.b.c.d" or "hostname"

       DEVNODE (parallel only):
	      "/dev/parportX", X=0,1,2,...

       SERIAL NO. (usb and parallel only):
	      "serial no."

EXAMPLES

       Setup using GUI mode:
	      $ hp-setup

       Setup using GUI mode, specifying usb:
	      $ hp-setup -b usb

       Setup using GUI mode, specifying an IP:
	      $ hp-setup 192.168.0.101

       One USB printer attached, automatic:
	      $ hp-setup -i -a

       USB, IDs specified:
	      $ hp-setup -i 001:002

       Network:
	      $ hp-setup -i 66.35.250.209

       Network, Jetdirect port 2:
	      $ hp-setup -i --port=2 66.35.250.209

       Parallel:
	      $ hp-setup -i /dev/parport0

       USB or parallel, using serial number:
	      $ hp-setup -i US12345678A

       USB, automatic:
	      $ hp-setup -i --auto 001:002

       Parallel, automatic, no testpage:
	      $ hp-setup -i -a -x /dev/parport0

       Parallel, choose device:
	      $ hp-setup -i -b par

NOTES

       1. If no serial number, USB ID, IP, or device node is specified, the USB and parallel busses will be probed for devices.

       2. Using 'lsusb' to obtain USB IDs: (example)

	  $ lsusb

		Bus 003 Device 011: ID 03f0:c202 Hewlett-Packard

	  $ hp-setup --auto 003:011

	  (Note: You may have to run 'lsusb' from /sbin or another location. Use '$ locate lsusb' to determine this.)

       3. Parameters -a, -f, -p, or -t are not valid in GUI (-u) mode.

SEE ALSO

       hp-makeuri hp-probe

AUTHOR

       HPLIP  (Hewlett-Packard Linux Imaging and Printing) is an HP developed solution for printing, scanning, and faxing with HP inkjet and laser
       based printers in Linux.

REPORTING BUGS

       The HPLIP Launchpad.net site https://launchpad.net/hplip is available to get help, report bugs, make suggestions, discuss the HPLIP project
       or otherwise contact the HPLIP Team.

COPYRIGHT

       Copyright (c) 2001-14 Hewlett-Packard Development Company, L.P.

       This software comes with ABSOLUTELY NO WARRANTY.  This is free software, and you are welcome to distribute it under certain conditions. See
       COPYING file for more details.

Linux									9.0							       hp-setup(1)