Hi all, I'd like to capture the output from the 'top' command to monitor my CPU and Mem utilisation.Currently my command is
I get the output in 3 separate lines.
. My desired output is
I have tried to use awk to process the output from the grep
and I only the figures I required, but the output still spans 3 lines
How should I modify the awk command to get everything on one line with the date at the front ?
I have the following line in my script:
$sftpcmd $rmthost <<COMMANDS>> $sftplog 2>&1
For some reason this is not capturing the errors from sftp, they go to the file attached to the cron entry
ie
mm hh dd MM * /myscript > cron.out
any idea why?
digital unix 4.0d (6 Replies)
Hi
I have a C++ program that generates a lot of log information on the console, I need this output (printed using printf function) to go to a file since I will use crontab to schedule the job.
I know I can do this:
myprog > myfile
but I don't know how to enter this in crontab.
I use... (3 Replies)
Hi,
I have a system under test, and I use a script that does a ps.
The output, is in the following format, it's basically the timestamp, followed by the rss and vsize.
09:03:57 68404 183656 68312 181944 69860 217360 67536 182564 69072 183172 69032 199276
09:04:27 68752 183292 70000 189020... (5 Replies)
Hello,
We have an oracle database running on a Linux host (RHEL5)...I'm trying to run Oracle dbv (database verify utility) and capture its output to a file using the following syntax but the standart output does NOT get redirected to the file...
dbv blocksize=32768 ... (2 Replies)
Hi,
I have two files , one file with data file with attributes that need to be sent to another file to generate a predefined format.
Example:
File.txt
AP|{SSHA}VEEg42CNCghUnGhCVg==
APVG3|{SSHA}XK|"password"
AP3|{SSHA}XK|"This is test"
....
etc
---------
test.sh has... (1 Reply)
Solaris experts,
Am struggling, and wondering for the past more than one week that, how to calculate the total available and used memory/swap space.
Finally installed and used top & got some understanding, but while cross-checking, there are mismatches.
Main Memory
top o/p - 2GB... (7 Replies)
Hello;
Am trying to generate runaway proc report using ssh thusly:
===================
ssh -t -t $BOX 'TERMINAL="vt100" top -d1 -h -n 10' >> $FILE
.
.
cat $FILE | mail -s "Latest Top `date`" $MAIL_TO
====================
But the output to e-mail comes out rather garbled ..
Any ideas... (1 Reply)
Hello All,
I'm writing a Bash Script and in it I execute a piped command within a Function I wrote and I can't seem to redirect the
stderr from the 1st pipe to stdout..?
I'm setting the output to an Array "COMMAND_OUTPUT" and splitting on newlines using this --> "( $(...) )". By putting... (6 Replies)
need help with formatting output of command top and prstat. My requirment is to remove few columns and display remaining . But when i used awk to do that the output seems to be have gone vague, mixing the column values.
After using awk to print particular column the output seems to have lost... (1 Reply)
Discussion started by: NarayanaPrakash
1 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)