02-17-2009
You don't need to issue init 5's or poweroff anything. reset /SP should do the trick. If the link light is not even blinking, then you have other issues. Link lights blink as long as there's a physical connection, even if the interface is not configured.
I don't want to assume what you have done so far, so here's what I would do first:
1.- determine if my connection to the switch is good. You can easily do that by hard-setting the iLOM IP in your laptop and connecting the very same iLOM cable to your laptop. If that works, then you know the problem is at the iLOM.
2.- Re-connect the iLOM to the switch, then reset the SP and see what happens to the link light.
a) if it never blinks, you have a bad iLOM.
b) if it blinks for a while but then it stops, check the iLOM's firmware level. You may need to update it.
10 More Discussions You Might Find Interesting
1. Programming
hi every one
i got a problem in blinking text
i tried like this
main()
{
initscr();
move(5,10);
addstr("this is blink->");
addch('H' | A_BLINK);
refresh();
getch();
endwin();
}
an error came like this
# cc r3.c
r3.c: In function ‘main':
r3.c:6: error: ‘A_BLINK' undeclared (first... (5 Replies)
Discussion started by: ramesh.jella
5 Replies
2. UNIX for Dummies Questions & Answers
Cursor is blinking (slightly) while loading page in Firefox, or during scrolling a window.
I tried some variants of linux (gnome permanently) and of course my solaris.
May be an artifact of X-window? Cause in windows cursor is stable (i'm feeling more confident).
PS: It makes me nervous. (0 Replies)
Discussion started by: Xcislav
0 Replies
3. UNIX for Dummies Questions & Answers
Hi,
I'm a newbie here and don't know if this is the right forum for my question, but I searched for a forum for gvim and can't find one.
My gvim shows always a blinking cursor, also if it is not the active xwindow. So I write very often in other xwindows, when editing with gvim. Is there a... (3 Replies)
Discussion started by: jeckle
3 Replies
4. UNIX for Dummies Questions & Answers
Hi
I have experienced some problems with the new monitor on my Solaris WS (Solaris5.4). Old monitor (Sony ES200) died an we installed a new one (Dell Ultrascan P780)
The system booted but the monitor statrted blinking at the rate about once in 5-7 seconds. This is espetially strange that the... (0 Replies)
Discussion started by: Andrey Malishev
0 Replies
5. Solaris
Hi Friends
we have sun T5240 server, we have taken ufsdump of this server remotely with scsi tapedrive, If we need to do ufsrestore means what we have to do, since T5240 has not having scsi port, any procedure is there?
Regards
Rajasekar (5 Replies)
Discussion started by: rajasekg
5 Replies
6. UNIX for Dummies Questions & Answers
Trying to make some blinking text to designate a process taking place. Trying to figure out how when the process is complete how to end the blinking. I could clear out but then I lose any prior output which I don't want.
echo "Archiving Files..."
printf "\x1b (10 Replies)
Discussion started by: wyclef
10 Replies
7. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
8. Solaris
Hi Folks,
Just a quick question - hopefully!
I have an application currently running on a V890 with Solaris 9, I'd like to move this to either one of our T-5's or one of the T5240's in a Legacy container on an LDOM - but the fly in the ointment is the application still uses a standard Hayes... (3 Replies)
Discussion started by: gull04
3 Replies
9. Debian
Hello,
I have downloaded and install debian in computer it is blinking cursor what this mean? (6 Replies)
Discussion started by: Riteshkakkar
6 Replies
10. UNIX for Beginners Questions & Answers
Suddenly useradd command is not working,no errors displayed and just got blinking cursor after hitting the command but not actually creating users as expected. Tried using the groupadd command but same results.
The last thing that I did if I can remember is changing the default run level from 5... (2 Replies)
Discussion started by: norbie.lopez
2 Replies
dc(4) Kernel Interfaces Manual dc(4)
Name
dc - serial line/mouse/keyboard
Syntax
device dc0 at ibus? vector dcintr
Description
The serial line controller provides four ports, with modem control on two of the ports. The DECstation 3100 and DECstation 2100 only pro-
vide partial modem control. The DECstation 5000 provides full modem control. The ports are used as follows:
Port Usage
0 Graphics device keyboard at 4800 BPS
1 Mouse or tablet at 4800 BPS
2 Communications port 1 (w/modem control)/local terminal
3 Communications port 2 (w/modem control)/local terminal
Each communication port from the serial line controller behaves as described in and can be set to run at any of 16 speeds. For the encod-
ing, see
When a graphics device is not being used as the system console, communications port 2 becomes the system console. In this configuration,
the port can only be used at 9600 BPS and no modem control is supported.
The serial line driver operates in interrupt-per-character mode (all pending characters are flushed from the silo on each interrupt).
Restrictions
Speed must be set to 9600 BPS on the console port and 4800 BPS on ports used by graphics devices. The serial line driver enforces this
restriction; that is, changing speeds with the command may not always work on these ports.
Files
console terminal
local terminal
local terminal
See Also
console(4), devio(4), tty(4), ttys(5), MAKEDEV(8)
RISC dc(4)