02-16-2009
Hello,
when sco issue this warning it is because the disk controler is different from the original machine.
to correct this issue you need the boot and root diskettes created from the OLD computer and the "BTLD" driver for the new disk controler.
on the new computer, boot with the diskette using the following command:
defbootstr link=ad320 root=ad320(0,0,0)
where "link=ad320" stands for the driver name
and "root=ad320(0,0,0,0)" tell sco what the hard drive address is. (controler #,bus #, disk id#, lun always 0)
This example is for an adaptec SCSI 320 controler, you need to adapt the command according to the controler installed.
*********************************************
quote=mehran_malek;302285082]hi all
i use sco open server reliseas 5 on my system i get an image from system hard disk to another hard disk with acronis software and start system with new(backup)hard disk, but during the boot process some errors generate as follow
warning:hd:noroot disk controler was found
hd:a boot-time loadable driver may be required
h i init
panic:srmount fan-error19 mounting rootdev(1/42)
error 19 opening dumpdev(1/41)
dump not completed
safe to power off
thank to any body who help me for solving this problem
sorry for my poor english speaking[/quote]
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I have a USB disk on a little NAS controller (NSLU2 running unslung 6.8) that I can access nicely with root with
mount -t cifs \\\\10.134.23.23\\DISK\ 2 /mnt/LKGD7F73A
However, when I run emacs from an user mode xterm prompt, emacs cannot read and write the files on /mnt/LKGD7F73A. Emacs can... (11 Replies)
Discussion started by: siegfried
11 Replies
2. Shell Programming and Scripting
Hello,
I am trying to monitor disk space for each node on the machine. I am able to get all individual nodes but for the '/' node. For example:
df -k:
bash-2.05b# df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/xxx 4127108 2415340 1502120 62% /
/dev/yyy ... (3 Replies)
Discussion started by: chiru_h
3 Replies
3. Solaris
Hi,
I have a solaris box where everything except the swap slice is mirrored.
Swap is used only from the first disk currently.
# swap -l
swapfile dev swaplo blocks free
/dev/md/dsk/d11 85,11 16 16780208 16780208
# metastat d11
d11: Concat/Stripe
Size: 16780224 blocks (8.0 GB)
Stripe 0:... (1 Reply)
Discussion started by: uxadmin007
1 Replies
4. BSD
Hello there. I installed NetBSD yesterday on an older system to try it out. Everytime I boot, I have to enter in the root device (disk) manually wd0 which then proceeds into asking to define the dump device: is the default then, the sbin/init My question is where am I supposed to... (1 Reply)
Discussion started by: septima.pars
1 Replies
5. SCO
hi...
i hav a problem to install sco unix
while installing sco unix 5.0.5 in acer altos with hardware raid
am getting error
"Warning HD: no root disk controller was found
system error 5: while getting fs type
flushing controller: DAC960PRL cache done."
i hav use the following... (18 Replies)
Discussion started by: mselvaprakash
18 Replies
6. SCO
I'm "attempting" to install SCO 5.0.7 on an HP ML370 G4 server and am ready to bash the keyboard with head now. I keep getting the error message "WARNING hd: no root disk controller found" when running the bootable install cd.
I have a raid 5 array with an online spare created using 4 36.3 GB... (2 Replies)
Discussion started by: FrictionBurn
2 Replies
7. Solaris
Hi all
I wish to mirror for the root disk, but last time i do, make the server cannot boot up. :p So this time, hope you guys can assist me on it. =)
At the last code, is the step i wish to do. Please help to check and correct me if got any wrong.
root@leo # format </dev/null
Searching for... (17 Replies)
Discussion started by: SmartAntz
17 Replies
8. AIX
hello all
i just installed my 1rst 6.1 machine and it's working fine but i can't find the root .profile ?????
can any one help
BEst Regards (1 Reply)
Discussion started by: islam.said
1 Replies
9. Solaris
Hi All
Hope it's okay to post on this sub-forum, couldn't find a better place
I've got a 480R running solaris 8 with veritas volume manager managing all filesystems, including an encapsulated root disk (I believe the root disk is encapsulated as one of the root mirror disks has an entry under... (1 Reply)
Discussion started by: sunnyd76
1 Replies
10. Solaris
Hello,
I have a Sparc system with encapsulated disks.
Because of disk errors I had to replace rootdisk,
I did it with
vxdiskadm 4)
replacement, vxdctl disable/enable,
vxdiskadm 5)
After it it the system boot failed, dropped back to the ok> prompt, message was:
The file... (0 Replies)
Discussion started by: ggi
0 Replies
LEARN ABOUT OSF1
disklabel
disklabel(4) Kernel Interfaces Manual disklabel(4)
NAME
disklabel - Disk pack label
SYNOPSIS
#include <sys/disklabel.h>
DESCRIPTION
Each disk or disk pack on a system may contain a disk label which provides detailed information about the geometry of the disk and the par-
titions into which the disk is divided. It should be initialized when the disk is formatted, and may be changed later with the disklabel
program. This information is used by the system disk driver and by the bootstrap program to determine how to program the drive and where
to find the file systems on the disk partitions. Additional information is used by the file system in order to use the disk most effi-
ciently and to locate important file system information. The description of each partition contains an identifier for the partition type
(standard file system, swap area, etc.). The file system updates the in-core copy of the label if it contains incomplete information about
the file system.
The label is located in sector number LABELSECTOR of the drive, usually sector 0 (zero) where it may be found without any information about
the disk geometry. It is at an offset LABELOFFSET from the beginning of the sector, to allow room for the initial bootstrap. The disk
sector containing the label is normally made read-only so that it is not accidentally overwritten by pack-to-pack copies or swap opera-
tions; the DIOCWLABEL ioctl, which is done as needed by the disklabel program, allows modification of the label sector.
A copy of the in-core label for a disk can be obtained with the DIOCGDINFO ioctl; this works with a file descriptor for a block or charac-
ter (raw) device for any partition of the disk. The in-core copy of the label is set by the DIOCSDINFO ioctl. The offset of a partition
cannot generally be changed, nor made smaller while it is open. One exception is that any change is allowed if no label was found on the
disk, and the driver was able to construct only a skeletal label without partition information. Finally, the DIOCWDINFO ioctl operation
sets the in-core label and then updates the on-disk label; there must be an existing label on the disk for this operation to succeed.
Thus, the initial label for a disk or disk pack must be installed by writing to the raw disk. All of these operations are normally done
using the disklabel program.
RELATED INFORMATION
Files: disktab(4)
Commands: disklabel(8) delim off
disklabel(4)