I have re-compiled kernel source code available in /usr/src/linux.2.4.20 with "make" command. The compilation is succesful.
Now the problem is create the image for this. The documentation in the same folder says that now you have compile "make image". There is no option for image in Makefile. ... (3 Replies)
Hi All,
Is there a max number of slabs that can be used per kernel module? I'm having a tough time finding out that kind of information, but the array 'node_zonelists' (mmzone.h) has a size of 5. I just want to avoid buffer overruns and other bad stuff.
Cheers,
Brendan (4 Replies)
Hi All
Im trying to access the my windows XP NTFS from Redhat linux 4.0 Enterprise edition
I have downloaded the respective rpm
And im able to install it successfully
Then i have given the following command , but got an error
Here are my partitions
And when i give the below... (1 Reply)
Hi all,
I am working on USB data monitoring on Fedora Core 9. Kernel 2.6.25 has a built-in module (the one that isn't loadable, but compiles and links statically with the kernel during compilation) to snoop USB data. It is in <kernel_source_code>/drivers/usb/mon/.
I need to know if I can... (0 Replies)
Hi masters,
I am new to linux and unix forum and this is my first forum. So please excuse if
I am not giving sufficient information. I will give them on request.
I have created a bandwidth manager module. I am using a 2.6.9 kernel and in Red Hat 3.4.3 distribution. But when i run make... (1 Reply)
I'm trying to compile an apache module (a tutorial module, Apache 2 Module Tutorial - GNU Build Tools and the Development Environment) and I get errors like this:
apr.h:273: error: expected ´=´, ´,´,´;´,´asm´ or ´__attribute__´ before ´apr_off_t´
those errors occur like 30 times in different... (4 Replies)
Hi All,
I am trying to compile Kernel 2.6.31 with arm-linux-gcc3.2.2 for s3c2440a, but I am not able to perform the task.
I am using Redhat 9
firstly i am using the following commands
$make s3c2410_defconfig // there is no error in execution of this command
next i run
$make
... (0 Replies)
I have complied the kernel with a default settings... now if I load this kernel , it'll load perfectly but the INTERNET is not workink... I think in the default settings The network modules are not included.. Can anybody help me out with the selection of the network module when i give "make... (1 Reply)
I have installed ubuntu 11.04 on my system.
After this when I used to give uname -r it showed me kernel version as 2.6.38.
Now I had downloaded kernel 2.6.34.12 from kernel.org and installed it using the following steps:
make
make modules
make modules_install
make install
This created... (2 Replies)
Hi everyone,
I am trying to prevent the ehci_hcd kernel module to load at boot time.
Here's what I've tried so far:
1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here):
2) Blacklisted the module by adding the following string to
3) Tried to blacklist the module... (0 Replies)
Discussion started by: gacanepa
0 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)