The bdf command does not account for any disk space reserved for swap
space, or used for the HFS boot block (8 KB, 1 per file system), HFS
superblocks (8 KB each, 1 per disk cylinder), HFS cylinder group
blocks (1 KB - 8 KB each, 1 per cylinder group), and inodes (currently
128 bytes reserved for each inode). Non-HFS file systems may have
other items not accounted for by this command.
I am trying to write a script that will allow me to do a bdf then do a test for a percentage that is 90% or greater. If the test is true then i want to send a message to myself and one other person.
Any suggestions ? ? ?
Thanks.
....svp (6 Replies)
I've recently had some space problems on one of our old HP9000 machines. I archived/moved/compressed/trashed some stuff to free up some space on one rather large (and important) logical volume.
As one would expect, when `df -b` is executed some space is shown as free:
/opt ... (2 Replies)
Previously i was using bdf -h in Solaris server. Now i have moved to AIX server and i would like to know equialent to "bdf -h" in AIX server.
Please help me. Thanks in Advance. I am expecting output as below
Filesystem size used avail capacity Mounted on
/dev/vx/dsk/vg04/t1... (3 Replies)
I have this line in a sh script:
bdf | grep /var/opt/vgdb | tr -s " " | cut -f4,6 -d" " | awk '{print $2" "$1}' > vgdb_free_space.txt
if I run that line in the shell it works fine
but when I ran the script got this error:
add_database_files.sh: line 83: bdf: command not found
also I tried... (4 Replies)
Hello people.
First of all I googled my problem and even found answers in this forum. Unfortunatelly my problem is not solved.
When the lenght of the filesystem is too big the output of bdf wraps into another line. e.g.:
Filesystem kbytes used avail %used Mounted on... (5 Replies)
I have another script which I found also on the net.
I keep getting an error:confused::
Here is the script for it:
{/usr/bin/bdf -l |awk '$0 !~ /^F/' |awk '{print $5"\t" $6}'| sed 's/'%'//' >/tmp/b
dflist}
panic ()
{while read percent dir; do
if ]
then ... (16 Replies)
hi,
bdf command hangs but before it, it lists all the fstab content, so i cannot find the reason...
could anybody give me any clue??
thanks a lot for your attention.
regards
Pablo
i attach syslog
Jan 14 16:30:00 sv23 vmunix: hp_dlpi_wput:Received an unrecognized primitive: 101d... (7 Replies)
Hello all,
First I have an old HP-UX box(11.21) for which I need to implement file-system utilization monitoring. I choosed to use bdf and a simple for loop. However sometimes the output of bdf is as this one(this is actually form linux but the idea is the same)
Filesystem ... (4 Replies)
Hi guys, I have to make an output of several databases we've got running on our system with the command bdf. This has to be done every 3 months. I want to put it in an scriptfile and trigger it in crontab. In the output it must display the differences in diskspace between these three monts. Any... (3 Replies)
Discussion started by: djmental
3 Replies
LEARN ABOUT DEBIAN
hex2bdf-split
HEX2BDF-SPLIT(1) General Commands Manual HEX2BDF-SPLIT(1)NAME
hex2bdf-split - Convert a GNU Unifont .hex file into single-width BDF fonts.
SYNOPSIS
hex2bdf-split n < input_font.hex > halfwidth_output_font.bdf
hex2bdf-split y < input_font.hex > fullwidth_output_font.bdf
DESCRIPTION
hex2bdf-split reads a sorted GNU Unifont .hex file (sorted with the Unix sort utility) from stdin and writes a BDF version of the font to
stdout. This utility was adapted from the original hex2bdf script to accomodate charcell behavior in older X11 implementations. It is
present for historical reasons, but will probably be removed in a future distribution. Dependency on this program is discouraged. The
main software application written to use the GNU Unifont, the international editor Yudit, does not need a split font. In addition, the GNU
Unifont now has a TrueType version that makes most other use of the BDF version obsolete.
hex2bdf-split takes one argument: "y" or "n". If "n" is specified, the output font is set to half-width (8 pixels wide) and "-h-" (for
half-width) appears as the X Logical Font Descriptor (XLFD) ADD_STYLE_NAME value. If "y" is specified, the output font is set to full-
width (16 pixels wide), and "-f-" (for full-width) appears as the X Logical Font Descriptor (XLFD) ADD_STYLE_NAME value.
FILES
*.hex GNU Unifont font files
SEE ALSO bdfimplode(1), hex2bdf(1), hex2sfd(1), hexbraille(1), hexdraw(1), hexmerge(1), johab2ucs2(1), unibmp2hex(1), unicoverage(1), unidup(1),
unihex2bmp(1), unipagecount(1), uniunmask(1)AUTHOR
hex2bdf-split was written by David Starner, based upon the original hex2bdf Perl script by Roman Czyborra.
LICENSE
hex2bdf-split is Copyright (C) 1999 David Starner, and is released under the following terms (taken from http://czyborra.com/):
"All of my works you find here are freeware. You may freely copy, use, quote, modify or redistribute them as long as you properly attribute
my contribution and have given a quick thought about whether Roman might perhaps be interested to read what you did with his stuff. Hori-
zontal rules don't apply."
BUGS
No known bugs exist.
2008 Jul 06 HEX2BDF-SPLIT(1)