when configuring the second interface (that should not have a default gateway) use
Another note: if you have two default gateways, they will both come back on a reboot even if you do a route delete. You must use
to delete the second route to clean it out of the system completly.
Are you sure you configured the two adapters for the right networks (you don't have them backwards)? Is your netmask set properly on both adapters?
Edit: I edited the first command from smitty mktcpip to smitty chinet. Had a brain fart.
my actual default gatewas IP is:
default 192.168.11.254
and I need to change it to 192.168.11.2, I'm using Solaris 9, how can i do it? and how i can save it in case that the machine restart and have the new default gateway IP saved? (5 Replies)
i'm a real unix newbie, setting up a network, with a router to router vpn connection with a remote site, all the win stuff is talking and pinging and all the stuff it should be doing (yeah and crashing too, lol) but no communication with the unix box, i think the problem is with my default... (3 Replies)
Dear Sir
I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper.
I am having a problem, configuring static call routing on GNUGK
in the section
... (0 Replies)
Hi,
Here is the issue: There are 2 identical systems in the same subnet here. They can ping and ssh each other. One can ping the default gateway and one can not with error '... icmp_seq Destination Host Unreachable'. I can't find any difference between the two systems in terms of network... (4 Replies)
Hi..I have to change default gateway in my linux machine. Its OS is RHEL6.
I followed following steps.
1.run command ip route to check current default gateway
2.delete that gateway with command
route del default gw x.x.x.x eth2
3.Add new gatewy with command below
route add default gateway... (3 Replies)
I am am using IPv6 IP's with an OS of Debian.
Is it possible to set a *static* default gateway w/o the router being connected? Will that gateway change when the router is connected?
TIA (0 Replies)
Dear friends
I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Discussion started by: tanpeng
6 Replies
LEARN ABOUT DEBIAN
vde_l3
VDE_L3(1) General Commands Manual VDE_L3(1)NAME
vde_l3 - Virtual Distributed Ethernet 'Layer 3' Switch.
SYNOPSIS
vde_l3 -v vde_plug:ipaddress/netmask [-v...] [-r target_network/netmask:gateway] [-G default_gw] [-M mgmt_socket]
DESCRIPTION
A vde_l3 connects to one or more vde_switches, performing ip forwarding among its virtual interfaces. A new interface is created at startup
for each -v option given at command line. Static routes to target networks can be defined using the -r option.
vde_l3 -v /var/run/s1.ctl:192.168.0.1/24
connects to the vde sock at /var/run/s1.ctl with its virtual interface ve0, having the address 192.168.0.1 and netmask 255.255.255.0.
vde_l3
-v /var/run/s1.ctl:192.168.0.1/24
-v /var/run/s2.ctl:10.0.0.254/255.255.0.0
connects to the two vde socks, with its virtual interfaces ve0 and ve1, having addressess 192.168.1.0 and 10.0.0.254 respectively. Hosts in
each network can specify the vde_l3 as their gateway to reach the other one.
OPTIONS -v vde_plug:ipaddress/netmask
Creates a virtual network interfaces on the vde_l3 box, with address ipaddress and netmask netmask. Please note that the netmask can
be specified either in the 'classic' A.B.C.D mode, or just by giving the number of leading bits (f.e., /17 for 255.255.128.0). One
can define as many interfaces as she wants.
-r target_network/netmask:gateway
Specify a static route through gateway to reach hosts in target_network with netmask netmask. One can define as many routes as she
wants.
-G default_gw
Specify a default gateway, to be used whenever no static route is defined for a target host.
-M mgmt_socket
the unix socket where the parameters (interfaces addresses, routes, etc.) can be checked and changed runtime. unixterm(1) can be
used as a remote terminal for wirefilter.
NOTICE
Virtual Distributed Ethernet is not related in any way with www.vde.com ("Verband der Elektrotechnik, Elektronik und Informationstechnik"
i.e. the German "Association for Electrical, Electronic & Information Technologies").
SEE ALSO vde_switch(1), vdeq(1), unixterm(1), vde_cryptcab(1), wirefilter(1).
AUTHORS
VDE_L3 is a tool by Daniele Lacamera <root@danielinux.net>
VDE is a project by Renzo Davoli <renzo@cs.unibo.it>
Virtual Distributed Ethernet May 7, 2007 VDE_L3(1)