02-06-2009
10 More Discussions You Might Find Interesting
1. Solaris
I modified the partitions on my Solaris 10 disk using format command in "boot cdrom -s" mode and then tried rebooting with "reboot". It said "Boot load failed".
Why does this happen?
I have faced this error before:( and I went in for a fresh installation of the OS.Can anyone tell me the reason as... (1 Reply)
Discussion started by: lydiaEd
1 Replies
2. Solaris
Morning all,
I have a problem with a Sun workstation which is running Solaris 8.
When I attempt to open an application, the executable fails with this message :
"fatal: libcstd.so.1: open failed: No such file or directory"
It was suggested to me that I need to add these patches to fix the... (4 Replies)
Discussion started by: AndyD
4 Replies
3. Solaris
Hi all,
O people of expert how can i connect to windows server 2003 remote desktop through Microsoft terminal server i don't want to install third parties products such VNC server or any web browser tools such as Remotely AnyWhere on the windows box what options and what procedures do i have to... (2 Replies)
Discussion started by: h@foorsa.biz
2 Replies
4. Solaris
After issuing reboot command (and disconnected from PuTTY), server is not even rebooted because ping test is succesful. So I connect to ALOM and issue poweroff command. After a minute, I did poweron and get this message (only).
rsc> poweron
Are you sure you want to turn your system power on... (10 Replies)
Discussion started by: Olli.Lang
10 Replies
5. Solaris
Installed Sun Solaris 10 (5/09) on vmware 6.0 but system is not connecting to internet.
when I check "ipconfig /all" I do not get any DNS Suffix name -- neither for vmnet1 and vmnet8 nor for local ethernet IP. Default gateways are 192.168.1.1 and 192.168.1.2
1. Created /etc/resolv.conf
domain... (1 Reply)
Discussion started by: johnjerry
1 Replies
6. Solaris
Hi all.
I try to start an application, but libucb.so1 is missing.
# appl23
# appl23ld.so.1: appl23: fatal: libucb.so1: open failed: No such file or directory
killed
#
# ldd appl23
libXm.so.3 => /usr/lib/libXm.so.3
libMrm.so.3 => /usr/lib/libMrm.so.3
... (14 Replies)
Discussion started by: wolfgang
14 Replies
7. Red Hat
Hi,
# yum --skip-broken -y update
rpmdb: Thread/process 6657/3078387392 failed: Thread died in Berkeley DB library
error: db3 error(-30974) from dbenv->failchk: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open... (3 Replies)
Discussion started by: sef alislam
3 Replies
8. HP-UX
Hi all,
I have an HP-UX server that halts during boot. Below is CO output.
Any ideas how to solve this? Any help would be appreciated. Thank you.
HP-UX Boot Loader for IPF -- Revision 2.027
Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix -lq
Seconds left till... (0 Replies)
Discussion started by: MazenH
0 Replies
9. Solaris
Dear all,
I have a solaris 10 in my environment (VMware virtual machine). recently I increased the harddisk size from the VMware and reboot my server. after reboot the os is unable to boot and gives the below error message.
exec(/sbin/init) file not found
press any key to restart
... (3 Replies)
Discussion started by: krishna001
3 Replies
10. Solaris
I have M10-1. Installation OS 10 from cdrom external.
Here message from OK Prompt
{0} ok probe-scsi-all
/pci@8000/pci@4/pci@0/pci@2/pci@0/usb@4,1/cdrom@1
Unit 0 Removable Read Only device HL-DT-STDVDRAM GP65NB60 PF00
But..
{0} ok boot... (3 Replies)
Discussion started by: mbahjiman
3 Replies
SRAW(8) System Manager's Manual SRAW(8)
NAME
sraw - benchmark raw scsi I/O performance under linux
SYNOPSIS
sraw [ -fiv6 ] scsi-device [ bstart [ bstep ] ]
DESCRIPTION
This program basically reads the specified scsi device and measures the throughput. Note that the filesystem *AND* the buffer cache are
bypassed by this code, this program was designed to benchmark the naked scsi drivers by themselves without the need to account for the
overhead of any other portion of the kernel. It also could be used to benchmark disk read throughput.
This program does a series of reads of the disk, of consecutive areas on the disk. The device is first queried to determine the sector
size for the device, and then the series of reads is begun. About 5.0 Mb is read from the device, and then the performance numbers are
reported. Note that since the buffer cache is completely bypassed, there is no need to be concerned about cache hits or anything.
Output of sraw is a set of lines, 4 numbers per line: blocksize, elapsed time, nblocks and throughput (in bytes per second).
scsi-device is either a block device (e.g. /dev/sda, /dev/scd0) or a generic SCSI device (e.g. /dev/sg0).
OPTIONS
-f set FUA (Force Unit Access) bit during read. Data is then read from media instead of internal drive cache.
-i use legacy ioctl instead of new SG I/O layer (will not work on 2.6 kernel and block devices).
-v more verbose output.
-6 use 6-bytes instead of 10-bytes read command. In this case, only the first GB of data could be read from media.
bstart starting block to check different zones on ZBR discs
bstep factor for sequential stepping, default 1. Use 0 for reading always the same blocks (from cache)
ERRORS
sraw could issue input/output errors when reading too many blocks at the same time from a block device like /dev/sda. To get rid of them,
use /dev/sgN instead.
AUTHOR
sraw was first written by Eric Youngdale. Extensions (-v, -f, -6, SG IO, man page) were written by Eric Delaunay.
SEE ALSO
sg_dd(8) from sg3-utils package.
AVAILABILITY
sraw is available at
ftp://tsx-11.mit.edu/pub/linux/ALPHA/scsi/
Nov 1993 SRAW(8)