02-05-2009
OK, 4.3.1 still leaves a pretty narrow window of machines that will support this and 5.3.
What is the new system?
prtconf |head
command will show this.
While you are at it, what is the old machine?
You might still be able to update the 4.3.1 machine to 4.3.3 from fix central but I doubt it.
You have probably left it too long to do this update without major pain.
In fact the only machine that supports 4.3.1 and 5.3, other than the F/H50, is the 7017-S70.
Unless you have one of these three to migrate to 5.3 you are probably stuck.
You might be able to do it with a few days of running alt_disk_'command' combinations, good luck.
10 More Discussions You Might Find Interesting
1. AIX
Hi friends..
My one problem is not resolved yet I have another.
I am planning to take an OS backup of my p550 using "mksysb". Now i am confussed. suppose I give the command to take the backup into a tape drive and my backup size exceeds the tape capacity.. what will happen? will it ask for... (2 Replies)
Discussion started by: balaji_prk
2 Replies
2. AIX
Am taking a tape backup and the error output shows this.
----------------------------------------------------------------
====== mksysb errors from /opt/uss/log/run_mksysb.stdout:
0512-038 mksysb: Backup Completed Successfully.
====== mksysb errors from /opt/uss/log/run_mksysb.stderr:
... (1 Reply)
Discussion started by: balaji_prk
1 Replies
3. AIX
I dont have either a tape drive or a DVD Writer attached to the AIX box. Can you let me know the possibilities of making an mksysb in a bootable media? This is required as we have a requirement to upgrade the OS. (2 Replies)
Discussion started by: chrisanto_2000
2 Replies
4. AIX
Hi, guys
I have experience in UNIX, but more in hpux, have done an mksysb in an Aix server 5.3, and then restore in other server with same model, everithing fine but no TCP/IP configuration and hostname its like "localhost" after the restore. It's something wrong? I've change the configuration,... (5 Replies)
Discussion started by: uadm26
5 Replies
5. AIX
hi guys,
i just want to take my server's mksysb backup through dvd-rom.but am having the doubt that, while am taking the mksysb backup in image it shows 8GB. So can i confirm that it takes 2 dvds and after writing in 1st cd it will ask for 2nd cd??????
please help me out. (1 Reply)
Discussion started by: rrlog
1 Replies
6. AIX
Hello,
I'm starting a mksysb with the help of a unix script and the crontab.
The script is scheduled with crontab and executes "mksysb -i -X /dev/rmt0".
When the mksysb is completed the script displays the endtime.
But I also get a lot of cat messages (see below). When I look with "ps -ef... (2 Replies)
Discussion started by: Peter_e
2 Replies
7. AIX
Hello everyone
I have two questions. I would like to hear your opinions, your tips.
I have several box with aix 5.3. the rootvg in each box has mirror. but I have a cron that makes a mksysb every week.
Do you think that it the best to have a mksysb of rootvg if I have a mirror on this... (4 Replies)
Discussion started by: lo-lp-kl
4 Replies
8. AIX
Hi,
Can any one suggest me how to take the mksysb backup in CD (VCD/DVD). I have tried like #mkcd -d /dev/cd0, but its not working. (3 Replies)
Discussion started by: oprakash
3 Replies
9. AIX
hi
we are having one rootvg in that we created one lv named mksysb_backuplv
and normally script will run accordingly to take the backup in the cron,here i just want to know if any rootfilesystem was correpted like /usr or /tmp ,then how could i restore the particular filesystme from the... (1 Reply)
Discussion started by: senmak
1 Replies
10. AIX
Hello,
I use commands savevg & mksysb to do backups on an AIX server.
Frequently, I have a return code 3.
I would know why, but after searches, I did'nt find.
If somebody know ... Tell me.
Thanks.
emetra (2 Replies)
Discussion started by: emetra
2 Replies
ruptime(1) General Commands Manual ruptime(1)
NAME
ruptime - show status of local machines
SYNOPSIS
DESCRIPTION
outputs a status line for each machine on the local network that is running the daemon. status lines are formed from packets broadcast
once every 3 minutes between daemons (see rwhod(1M)) on each host on the network. Each status line has a field for the name of the
machine, the status of the machine (up or down), how long the machine has been up or down, the number of users logged into the machine, and
the 1-, 5- and 15-minute load averages for the machine when the packet was sent.
The status of the machine is reported as ``up'' unless no report has been received from the machine for 11 minutes or more.
The length of time that the machine has been up is shown as:
Load averages are the average number of jobs in the run queue over the last 1-, 5- and 15-minute intervals when the packet was sent.
An example status line output by might be:
The above status line would be interpreted as follows:
is presently ``up'' and has been up for 1 day, 5 hours and 15 minutes. It currently has 7 users logged in. Over the last 1-minute inter-
val, an average of 1.47 jobs were in the run queue. Over the last 5-minute interval, an average of 1.16 jobs were in the run queue. Over
the last 15-minute interval, an average of 0.80 jobs were in the run queue.
If a user has not used the system for an hour or more, the user is considered idle. Idle users are not shown unless the option is speci-
fied.
Options
If no options are specified, the listing is sorted by host name. Options change sorting order as follows:
Sort by load average.
Sort by up time.
Sort by the number of users.
Reverse the sort order.
DIAGNOSTICS
No status report files in
Ask the system administrator to check whether the daemon is running.
AUTHOR
was developed by the University of California, Berkeley.
FILES
Data files
SEE ALSO
rwho(1), rwhod(1M).
ruptime(1)