Sponsored Content
Operating Systems SCO how to access data in a pen drive in sco openserver 6 Post 302283822 by BEvans on Wednesday 4th of February 2009 06:18:37 AM
Old 02-04-2009
Most pen drives are formated FAT so the dosXX commands work. OS6 automatically mounts USB drives using the next available disk device nodes. So if you have one disk try dosdir /dev/dsk/1s1 or higher if you have more disks already (2s1, 3s1 etc). To copy the files use doscp.
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Magneto-Optical drive for SCO Openserver 5.0.5

Hi, I tried to install Magneto-Optical (MO) drive Fujutsu to COMPAQ Proliant ML350 with SCO Openserver 5.0.5. Harddisk and MO are connected to Adaptec UW-SCSI-3 (driver ad160). During boot process system shows me that MO is connected to host adapter 1, bus 0, SCSI ID 1 and LUN 0. But when I... (2 Replies)
Discussion started by: yurist
2 Replies

2. UNIX for Dummies Questions & Answers

USB pen drive support

Hello, I need information or tooling for using my USB pen drive (DANE-ELEC) in a unix environment. Until now I only get the "format window" in the unix machine but after giving OK for running the format, it never stops and I have to stop it manually. Seems that what I need is format my... (0 Replies)
Discussion started by: Argento73
0 Replies

3. Debian

linux on 128MB pen drive?

hello, I want to install minimal linux on 128MB pen drive. distro is debian. what all should i need? (2 Replies)
Discussion started by: yogesh_powar
2 Replies

4. SCO

SCO hard drive with data - No SCO computer

Situation - i have an IDE hard drive from server apparently running SCO last used in 2003. No access to computer it was formerly in. I need to access the drive to pull off data files from a billing/scheduling program. I have no SCO machine or access to one atm. Have some limited Linux... (3 Replies)
Discussion started by: lordlars1
3 Replies

5. SCO

SCO Openserver Release 5 and HP VS160 Tape Drive

Hi, Does anyone know if a HP VS160 Tape drive will work with SCO Openserver Release 5? If so what driver would it use? alad, cha? Thanks John (3 Replies)
Discussion started by: jfd7000
3 Replies

6. BSD

FreeBSD pen drive issue....

Hi there, I am using freebsd 7.0 and I am facing a lot of issues with it. The cd installed fine. I opted for the gnome desktop and tht too installed (though the refresh rates were wrong and the resloution got messed up). After some configurations the desktop was working fine. Then came the... (5 Replies)
Discussion started by: jedidiah
5 Replies

7. Linux

Not able to remove virus from a pen drive

Hello Friends, My pendrive (FAT32 filesystem) consist of following files+viruses. -rwxr-xr-x 1 chinmay root 0 2010-03-10 01:29 autorun.inf dr-xr-xr-x 2 chinmay root 4096 2010-03-09 23:51 Docs -rwxr-xr-x 1 chinmay root 4726162 2010-03-08 15:02 java_ee_sdk-5_03-javadocs.zip... (4 Replies)
Discussion started by: catchchinu1
4 Replies

8. SCO

Recover data from failed Hard disk in SCO OpenServer 5.06

One hard disk fail to mount (/dev/data). I had run "fsck /dev/data" then some error occured "unrecoverable error reading SCSI Disk 1 dev 1/104". I need to recover data from disk. please help. (1 Reply)
Discussion started by: rakeshkumar9919
1 Replies

9. Red Hat

making pen drive bootable

Anyone can plz tell me how to make pendrive bootable.unetbootin dont have option for red hat (0 Replies)
Discussion started by: shamapraveen
0 Replies

10. SCO

Sco unix 5.0 copy file to pen drive

I have a server unix Sco 5.0 and copy some backup files to flopy drive using command "Tar", but i like copy this files to pen drive, is possible ? my know about Sco is less. Tks (1 Reply)
Discussion started by: ger2112
1 Replies
disks(1M)						  System Administration Commands						 disks(1M)

NAME
disks - creates /dev entries for hard disks attached to the system SYNOPSIS
/usr/sbin/disks [-C] [-r rootdir] DESCRIPTION
devfsadm(1M) is now the preferred command for /dev and should be used instead of disks. disks creates symbolic links in the /dev/dsk and /dev/rdsk directories pointing to the actual disk device special files under the /devices directory tree. It performs the following steps: 1. disks searches the kernel device tree to see what hard disks are attached to the system. It notes the /devices pathnames for the slices on the drive and determines the physical component of the corresponding /dev/dsk or /dev/rdsk name. 2. The /dev/dsk and /dev/rdsk directories are checked for disk entries - that is, symbolic links with names of the form cN[tN]dNsN, or cN[tN]dNpN, where N represents a decimal number. cN is the logical controller number, an arbitrary number assigned by this program to designate a particular disk controller. The first controller found on the first occasion this program is run on a system, is assigned number 0. tN is the bus-address number of a subsidiary controller attached to a peripheral bus such as SCSI or IPI (the target number for SCSI, and the facility number for IPI controllers). dN is the number of the disk attached to the controller. sN is the slice number on the disk. pN is the FDISK partition number used by fdisk(1M). (x86 Only) 3. If only some of the disk entries are found in /dev/dsk for a disk that has been found under the /devices directory tree, disks creates the missing symbolic links. If none of the entries for a particular disk are found in /dev/dsk, disks checks to see if any entries exist for other disks attached to the same controller, and if so, creates new entries using the same controller number as used for other disks on the same controller. If no other /dev/dsk entries are found for slices of disks belonging to the same physical con- troller as the current disk, disks assigns the lowest-unused controller number and creates entries for the disk slices using this newly-assigned controller number. disks is run automatically each time a reconfiguration-boot is performed or when add_drv(1M) is executed. When invoking disks(1M) manually, first run drvconfig(1M) to ensure /devices is consistent with the current device configuration. Notice to Driver Writers disks considers all devices with a node type of DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, DDI_NT_BLOCK_WWN or DDI_NT_CD_CHAN to be disk devices. disks(1M) requires the minor name of disk devices obey the following format conventions. The minor name for block interfaces consists of a single lowercase ASCII character, a through u. The minor name for character (raw) inter- faces consists of a single lowercase ASCII character, a through u, followed by ,raw. disks translates a through p to s0 through s15, while it translates q through u to p0 through p4. SPARC drivers should only use the first 8 slices: a through h, while x86 drivers can use a through u, with q through u corresponding to fdisk(1M) partitions. q represents the entire disk, while r, s, t, and u represent up to 4 additional partitions. To prevent disks from attempting to automatically generate links for a device, drivers must specify a private node type and refrain from using a node type: DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, or DDI_NT_CD_CHAN when calling ddi_create_minor_node(9F). OPTIONS
The following options are supported: -C Causes disks to remove any invalid links after adding any new entries to /dev/dsk and /dev/rdsk. Invalid links are links which refer to non-existent disk nodes that have been removed, powered off, or are otherwise inaccessible. -r rootdir Causes disks to presume that the /dev/dsk, /dev/rdsk and /devices directory trees are found under rootdir, not directly under /. ERRORS
If disks finds entries of a particular logical controller linked to different physical controllers, it prints an error message and exits without making any changes to the /dev directory, since it cannot determine which of the two alternative logical-to-physical mappings is correct. The links should be manually corrected or removed before another reconfiguration-boot is performed. EXAMPLES
Example 1: Creating Block and Character Minor Devices The following example demonstrates creating the block and character minor devices from within the xkdisk driver's attach(9E) function. #include <sys/dkio.h> /* * Create the minor number by combining the instance number * with the slice number. */ #define MINOR_NUM(i, s) ((i) << 4 | (s)) int xkdiskattach(dev_info_t *dip, ddi_attach_cmd_t cmd) { int instance, slice; char name[8]; /* other stuff in attach... */ instance = ddi_get_instance(dip); for (slice = 0; slice < V_NUMPAR; slice++) { /* * create block device interface */ sprintf(name, "%c", slice + 'a'); ddi_create_minor_node(dip, name, S_IFBLK, MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0); /* * create the raw (character) device interface */ sprintf(name,"%c,raw", slice + 'a'); ddi_create_minor_node(dip, name, S_IFCHR, MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0); } } Installing the xkdisk disk driver on a Sun Fire 4800, with the driver controlling a SCSI disk (target 3 attached to an isp(7D) SCSI HBA) and performing a reconfiguration-boot (causing disks to be run) creates the following special files in /devices. # ls -l /devices/ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/ brw-r----- 1 root sys 32, 16 Aug 29 00:02 xkdisk@3,0:a crw-r----- 1 root sys 32, 16 Aug 29 00:02 xkdisk@3,0:a,raw brw-r----- 1 root sys 32, 17 Aug 29 00:02 xkdisk@3,0:b crw-r----- 1 root sys 32, 17 Aug 29 00:02 xkdisk@3,0:b,raw brw-r----- 1 root sys 32, 18 Aug 29 00:02 xkdisk@3,0:c crw-r----- 1 root sys 32, 18 Aug 29 00:02 xkdisk@3,0:c,raw brw-r----- 1 root sys 32, 19 Aug 29 00:02 xkdisk@3,0:d crw-r----- 1 root sys 32, 19 Aug 29 00:02 xkdisk@3,0:d,raw brw-r----- 1 root sys 32, 20 Aug 29 00:02 xkdisk@3,0:e crw-r----- 1 root sys 32, 20 Aug 29 00:02 xkdisk@3,0:e,raw brw-r----- 1 root sys 32, 21 Aug 29 00:02 xkdisk@3,0:f crw-r----- 1 root sys 32, 21 Aug 29 00:02 xkdisk@3,0:f,raw brw-r----- 1 root sys 32, 22 Aug 29 00:02 xkdisk@3,0:g crw-r----- 1 root sys 32, 22 Aug 29 00:02 xkdisk@3,0:g,raw brw-r----- 1 root sys 32, 23 Aug 29 00:02 xkdisk@3,0:h crw-r----- 1 root sys 32, 23 Aug 29 00:02 xkdisk@3,0:h,raw /dev/dsk will contain the disk entries to the block device nodes in /devices # ls -l /dev/dsk /dev/dsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a /dev/dsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b /dev/dsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c /dev/dsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d /dev/dsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e /dev/dsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f /dev/dsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g /dev/dsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h and /dev/rdsk will contain the disk entries for the character device nodes in /devices # ls -l /dev/rdsk /dev/rdsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a,raw /dev/rdsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b,raw /dev/rdsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c,raw /dev/rdsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d,raw /dev/rdsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e,raw /dev/rdsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f,raw /dev/rdsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g,raw /dev/rdsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h,raw FILES
/dev/dsk/* Disk entries (block device interface) /dev/rdsk/* Disk entries (character device interface) /devices/* Device special files (minor device nodes) ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ SEE ALSO
add_drv(1M), devfsadm(1M), fdisk(1M), attributes(5), isp(7D), devfs(7FS), dkio(7I), attach(9E), ddi_create_minor_node(9F) Writing Device Drivers BUGS
disks silently ignores malformed minor device names. SunOS 5.10 7 Nov 2002 disks(1M)
All times are GMT -4. The time now is 01:47 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy