Sponsored Content
Full Discussion: HP-UX using unused HDD space
Operating Systems HP-UX HP-UX using unused HDD space Post 302283405 by goon12 on Tuesday 3rd of February 2009 09:32:04 AM
Old 02-03-2009
HP-UX using unused HDD space

Hello,

I have a system with HP-UX 11.23 installed on it. There are ~36GB of unused space on the HDD. I did a very basic installation, and it created the usual volume group /dev/vg00. When I look at the output of ioscan -funC disk, I see this (and more, but irrelevant to this post):
Code:
disk      1  0/1/1/0.0.0    sdisk      CLAIMED     DEVICE       HP 73.4GST373454
LC
                           /dev/dsk/c2t0d0     /dev/rdsk/c2t0d0
                           /dev/dsk/c2t0d0s1   /dev/rdsk/c2t0d0s1
                           /dev/dsk/c2t0d0s2   /dev/rdsk/c2t0d0s2
                           /dev/dsk/c2t0d0s3   /dev/rdsk/c2t0d0s3

How do I "see" the unused hard drive space? I am looking at the size of the "slices" and here is what I am seeing:
Code:
# diskinfo -v /dev/rdsk/c2t0d0s1 | grep size
               size: 512000 Kbytes
# diskinfo -v /dev/rdsk/c2t0d0s2 | grep size
               size: 70765568 Kbytes
# diskinfo -v /dev/rdsk/c2t0d0s3 | grep size
               size: 409600 Kbytes

Normally on a Linux system I could do something like "fdisk -l /dev/sda" to see the partition table for /dev/sda, or I could do "fdisk /dev/sda" to view and/or edit the partition table for that device.

Thanks,
Joe
 

10 More Discussions You Might Find Interesting

1. Solaris

Maximizing 20GB HDD space

hello All! I have sun ultra5 pc with 9GB HDD and I'm planning to add 20GB HHD for future expansion and it is coming from my old intel based pc. My problem is everytime I formatted the new HD the system only gives me the result of free space for about 2GB+ as a maximum space. I have... (1 Reply)
Discussion started by: xtian
1 Replies

2. UNIX for Dummies Questions & Answers

How do I get the unused space?

One of my Solaris 8 machines hd was about to die. So I used g4u to create an image of the 9gb drive and I put it in a 36gb drive. That solved my dieing hd problem. But.... How do I get my machine to see the unused 27gb of space? Any help would be greatly appreciated. (1 Reply)
Discussion started by: Spyzic
1 Replies

3. UNIX for Dummies Questions & Answers

delete the unused file

Hi All, Can you please let me know how to delete any files that have not been accessed in the past 28 days in a directory. Thanks, Arun (3 Replies)
Discussion started by: arunkumar_mca
3 Replies

4. AIX

how to clean Unused semaphore??

How can i clean up my unused semaphore??? (4 Replies)
Discussion started by: abhishek27
4 Replies

5. Shell Programming and Scripting

HDD free space check

Hi, I need to add a condition in a script. The script is executed only if there is free 8 Gigas space. I know if then fi I don't know how to write the condition on free space Thanks :) (1 Reply)
Discussion started by: pppswing
1 Replies

6. UNIX for Dummies Questions & Answers

Old HDD copy to new HDD ? im lost...

Over the last few months the HDD spins louder and louder, so I fiqured its time to replace the HDD. Its been running 24/7/365 since 98 :eek:. yes i said since 98 :D I have an IBM system 43P Model 240. 233 MHz. running AIX Version 4. The current HDD is an IBM DGHS COMP IEC -950 FRU PN#... (5 Replies)
Discussion started by: Chevy89rocks
5 Replies

7. Red Hat

Free space of HDD ?

Friends , Using which command I can see the free space or usage of the Total HDD in Linux RHEL ? suppose Imy HDD is 10GB space . I have to insall RHEL 5 using 6 GB space . Now i have 4 GB space free in my total HDD . Now using which cammand I see this 4 GB free space ? Wating for kind... (7 Replies)
Discussion started by: shipon_97
7 Replies

8. Solaris

unused disk space

i Have alloted 20G in my vmware for solaris 10, upon installation, and some distribution of disk space to /,/opt,swap i just use 19G. Can i still use the 1G? How? how to see the 1G? that i did not use? how can i use it? appreciate your responce (17 Replies)
Discussion started by: kenshinhimura
17 Replies

9. AIX

IBM AIX Internal HDD vs SAN HDD and Oracle

Hi Folks, I am facing an issue with the performance. P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and... (7 Replies)
Discussion started by: filosophizer
7 Replies

10. UNIX for Advanced & Expert Users

Detecting unused variables...

Hi guys... The first active code line in AudioScope.sh is set -u . This causes a complete exit if a variable is used/found but has not been allocated at the start of the program. However, apart from writing code to do the task, is there a switch to to check which variables have been... (17 Replies)
Discussion started by: wisecracker
17 Replies
cmdk(7D)							      Devices								  cmdk(7D)

NAME
cmdk - common disk driver SYNOPSIS
cmdk@target, lun : [ partition | slice ] DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable disks. The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin- gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit- ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk. I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL error. Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area. Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program. FILES
/dev/dsk/cndn[s|p]n block device (IDE) /dev/rdsk/cndn[s|p]n raw device (IDE) where: cn controller n dn lun n (0-7) sn UNIX system slice n (0-15) pn fdisk partition(0) /kernel/drv/cmdk 32-bit kernel module. /kernel/drv/amd64/cmdk 64-bit kernel module. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I) SunOS 5.10 9 Oct 2004 cmdk(7D)
All times are GMT -4. The time now is 09:11 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy