quad card configuration Post: 302283112

Sponsored Content

Operating Systems Solaris quad card configuration Post 302283112 by sameergrover on Monday 2nd of February 2009 03:03:06 PM

02-02-2009

Registered User

quad card configuration

Hi Group,

I Have just installed quad card in my V440 machine,

I am facing problem I cn just ping its ce0 card only rest of the cards are not ping able,
here is details of my machine.

ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index
1
inet 127.0.0.1 netmask ff000000
ce0: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 2
inet 10.2.132.72 netmask ffffff80 broadcast 10.2.132.127
ether 0:3:ba:9e:90:ed
ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.2.132.73 netmask ffffff80 broadcast 10.2.132.127
ether 0:3:ba:a1:fc:e0
ce2: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 4
inet 10.2.132.74 netmask ffffff80 broadcast 10.2.132.127
ether 0:3:ba:a1:fc:e1
ce3: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 5
inet 10.2.132.75 netmask ffffff80 broadcast 10.2.132.127
ether 0:3:ba:a1:fc:e2

bash-3.00# pwd
/etc
bash-3.00# cat hosts
::1 localhost
127.0.0.1 localhost
10.2.132.72 north02
10.2.132.73 north021
10.2.132.74 north022
10.2.132.75 north023
bash-3.00# cat hostname.ce0
north02
bash-3.00# cat hostname.ce1
north021
bash-3.00# cat hostname.ce2
north022
bash-3.00# cat hostname.ce3
north023

can anyone please suggest me where can be the problem

S A M

sameergrover

View Public Profile for sameergrover

Find all posts by sameergrover

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Sound Card configuration

Hie, Im using Linux Kernel 2.2.16-22 (Linux Ver7.0), My problem is My sound Card is not detected and configured properly, i tried many ways but still cant configured it out. Heres my detail problem. Whenever i tried to configure my sound card which i newly purchased ( Creative Vibra 128 Audio...

2. IP Networking

Quad Fast Ethernet Card on Sparc 10?

I am having a problem getting my configuration to stick. After I installed my quad-card I did the following: 1. created hostname.qe0, hostname.qe1, hostname.qe2, hostname.qe3 files in my /etc directory. 2. In my /etc/hosts file I added the ip address of each interface and the name for each...

3. BSD

Quad Booting...

Ok so currently I have XP and Slack booting on my laptop, the next two goals will be FreeBSD and Windows Server 2003, in that order (though I may need to start over and do server before unix/linux. Either way, how I got linux interacting nicely with XP was via this link: ...

4. Windows & DOS: Issues & Discussions

Quad or Duel Processors

Which hardware configuration gives you the best though put for processing? 1.) Quad CPU at 2 GHZ 2.) Dual CPU at 3 GHZ and More Memory. We currently have setup #1, I want to upgrade the server and I am investigating hardware configurations. Wanted to know if set #1 gives better though put...

5. SCO

speciliax card configuration

dear all i configured pci speciliax card in sco open server 5.0.5 but i only getting cursor prompt in terminal side my terminal is vt100 pls give the quries for configure terminal and speciliax card regards jeevaraj

6. Solaris

Dual IP configuration with two different network card

I am trying to configure dual IP each on different interfaces (ce0, ce2) with one logical/virtual IP. I can ping all three IP but can not TELNET to any of them. Here is all the information: ********************************************************* root@osssvr # more /etc/hosts # # Internet host...

7. Solaris

Quad Ethernet

I have a Quad Ethernet card in a 220R. 2 ports activated. Each has its own hostname file and both hostnames are in the hosts file. I want both ports to have the same IP address so we can use the 2nd port in case we lose communication on the port. On bootup, the box gives me: SIOCSLIFFLAGS:...

8. UNIX Desktop Questions & Answers

Does Red Hat Fedora support Nvidia card 8800GTX and 260 card?

Does Red Hat Fedora support Nvidia card 8800GTX and 260 card? Does any Linux OS support Nvidia card?

9. HP-UX

how can i know this processor quad or dual core ?

hi every body i want to know if i have server with hp-ux os if i did "machinfo" i will see no of cpu = for example 16 how can i know this is dual or quad core . thanks

LEARN ABOUT CENTOS

opensc-tool

OPENSC-TOOL(1)							   OpenSC Tools 						    OPENSC-TOOL(1)

NAME

       opensc-tool - generic smart card utility

SYNOPSIS

       opensc-tool [OPTIONS]

DESCRIPTION

       The opensc-tool utility can be used from the command line to perform miscellaneous smart card operations such as getting the card ATR or
       sending arbitrary APDU commands to a card.

OPTIONS

       --atr, -a
	   Print the Answer To Reset (ATR) of the card. Output is in hex byte format

       --card-driver driver, -c driver
	   Use the given card driver. The default is auto-detected.

       --info, -i
	   Print information about OpenSC, such as version and enabled components.

       --list-drivers, -D
	   List all installed card drivers.

       --list-files, -f
	   Recursively list all files stored on card.

       --list-readers, -l
	   List all configured readers.

       --name, -n
	   Print the name of the inserted card (driver).

       --reader num, -r num
	   Use the given reader number. The default is 0, the first reader in the system.

       --send-apdu apdu, -s apdu
	   Sends an arbitrary APDU to the card in the format AA:BB:CC:DD:EE:FF....

       --serial
	   Print the card serial number (normally the ICCSN). Output is in hex byte format

       --verbose, -v
	   Causes opensc-tool to be more verbose. Specify this flag several times to enable debug output in the opensc library.

       --wait, -w
	   Wait for a card to be inserted.

SEE ALSO

       opensc-explorer(1)

opensc								    06/17/2014							    OPENSC-TOOL(1)