02-02-2009
it's look like this site give me what i need.
i'll try it tommorow on my server.
i'll tell you all if i successed/failed implement this way.
thanks a lot.
Regards,
PS
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Hi guys
I had a system running 5.0.6 , we upgraded it to 5.0.7 everything was fine till i try to do a test backup.
The error was cannot open (cannot open /dev/xct0 no such file or directory)what i did was, removed the tape , reboot the system and the try to install it again, but its... (2 Replies)
Discussion started by: josramon
2 Replies
2. UNIX for Dummies Questions & Answers
I need to run a back up that will take more than one tape. What is the command that will continue the back up on to a second tape drive. the first is /dev/rStp0 second is /dev/rStp1. Anyone? (1 Reply)
Discussion started by: franruiz
1 Replies
3. SCO
Hi
Don't know if anyone will be able to help, but we're currently having problems with our external tape drive on our SCO server. If I try the following command for instance, "tar cvf /dev/rStp0", the tape drive jumps into action for a while, then comes back with the error "tar: cannot open:... (3 Replies)
Discussion started by: mattingg
3 Replies
4. UNIX for Advanced & Expert Users
trying to setup a sata drive using a sata to scsi adaptor
I have a sata 1TB Deskstar that I had setup before and during shipment from a facilty to another, the disk failed. The handling was not great, lots of throwing boxes, etc. I have a new disk from Hitachi (thankyou Hitachi) anyway, I don't... (1 Reply)
Discussion started by: mndavies
1 Replies
5. Filesystems, Disks and Memory
Hello,
I wanted to share an experience I had today which was quite a learning experience and perhaps useful for others who may run into the issue at some point in the future.
Basically, the scenario involves a OS which was installed on a machine which hardware-wise, had a SATA Drive. The... (0 Replies)
Discussion started by: septima.pars
0 Replies
6. SCO
Is SATA hard disk is suooprted by SCO OpenServer 5.05? If No, how to couter this problem. If yes, please provide the installation steps. (2 Replies)
Discussion started by: rakeshkumar9919
2 Replies
7. Hardware
Hello everybody,
I need to connect a laptop 2.5 SATA hard drive to a Desktop board (which uses 3.5' SATA hard drives). I've tried the connectors and they fit excellent in the 2.5 SATA connectors.
The problem is that the laptop hard drive uses 5v and the PC's power source sends 12v. So, my... (4 Replies)
Discussion started by: Zykl0n-B
4 Replies
8. Hardware
I have an upgrade path in mind for a new computer that will be stocked with a 2TB SATA 300 hard disk. This is a choice based on information that SATA 300 is not necessarily faster than SATA 600. The upgrade path in a year time or so would then involve the purchase of an SSD that would contain the... (4 Replies)
Discussion started by: figaro
4 Replies
9. SCO
I am very new to SCO Unix so I apologize if this is a easy or dumb question.
I have a 160GB SATA hard drive and SATA CD-ROM drive connected to one of my systems. I have both the drives running in compatibility mode. I also have the hard drive set as a primary master and the CD-ROM drive set as... (10 Replies)
Discussion started by: NPIGuy
10 Replies
10. UNIX for Beginners Questions & Answers
Good evening,
I should make a full image copy of the 1 terabyte hard drive on an HP WX4600 workstation and is present as the only Sco OpenServer 6 operating system, which I need to run a very old corporate accounting program. Logically, Sco OpenServer 6 on this workstation has been regularly... (7 Replies)
Discussion started by: NIGHTPRINCE79
7 Replies
LEARN ABOUT OPENSOLARIS
si3124
si3124(7D) Devices si3124(7D)
NAME
si3124 - SiliconImage 3124/3132 SATA controller driver
SYNOPSIS
sata@unit-address
DESCRIPTION
The si3124 driver is a SATA framework-compliant HBA driver that supports Silicon Image 3124 and 3132 SATA controllers. Note that while the
Silicon Image controllers supports standard SATA features including SATA-II disks, NCQ, hotplug, port multiplier and ATAPI disks, the
si3124 driver currently does not support NCQ, port multiplier or ATAPI features.
CONFIGURATION
There are no tunable parameters in the si3124.conf file.
FILES
/kernel/drv/si3124 32-bit ELF kernel module (x86).
/kernel/drv/amd64/si3124 64-bit ELF kernel module. (x86).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
|Availability |SUNWsi3124 |
+-----------------------------+-----------------------------+
SEE ALSO
cfgadm(1M), prtconf(1M), cfgadm_sata(1M), attributes(5), nv_sata(7D), sata(7D)
Writing Device Drivers
SunOS 5.11 17 August 2007 si3124(7D)