Port is locked Post: 302282035

9 More Discussions You Might Find Interesting

1. Solaris

Locked TCP port in Solaris 10

Hi all I haven't had much experience with Solaris 10 but we've started running into a problem where a process hangs, it is killed and leaves a zombie process. The sysadmins are saying this zombie process is locking a tcp port and not allowing the process to start up. The process is a usually...

2. Solaris

luxadm -e port shows one port not connected

hi i have a sun machine which has one hba 2ports; out of which one port says it is not connected # luxadm -e port /devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED /devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED but both...

3. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

4. IP Networking

telnet for port 5433 is not working while it works for port 22

Hi, I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from...

5. IP Networking

Tcp ip port open but no such process (merged: Release A Port)

i want to kill a tcp connection by killing its pid with netstat -an i got the tcp ip connection on port 5914 but when i type ps -a or ps-e there is not such process running on port 5914 is it possible that because i do not log on with proper user account i can not see that process running?

6. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

7. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

8. Shell Programming and Scripting

Help Generate new port base on the last port but not in used by other application

Hi Expert, Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used...

9. UNIX for Beginners Questions & Answers

Bash script, find the next closed (not in use) port from some port range.

hi, i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010). the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file. my code is: ...

LEARN ABOUT CENTOS

nsd-xfer

nsd-xfer(8)							    nsd 3.2.12							       nsd-xfer(8)

NAME

       nsd-xfer - AXFR client to transfer zones from a name server

SYNOPSIS

       nsd-xfer [-4] [-6] [-a address[@port]] [-p port] [-s serial] [-T tsiginfo] [-v] -z zone -f file servers

DESCRIPTION

       Nsd-xfer is program to transfer zones from a name server using AXFR.  NSD is a complete implementation of an authoritative DNS nameserver.

OPTIONS

       -4     Only send to IPv4 addresses.

       -6     Only send to IPv6 addresses.

       -a address[@port]
	      Specify the source address (and port) to send from.

       -f file
	      The file to store the zone in.

       -p port
	      Specify the port to send to.

       -s serial
	      Specify the serial of the current zone. The zone is only transferred if the master server has a zone with a greater serial number.

       -T tsiginfo
	      Use  TSIG  to verify the zone transfer. The tsiginfo file must contain the TSIG key information. The file is removed upon successful
	      reading of the key. The format of the tsiginfo file is described in the doc/README file (section 3.3).

       -v     Be more verbose.

       -z zone
	      Specify the zone to receive.

       servers
	      List of nameservers to try.

EXAMPLES

       To run this program the standard way type:

       # nsd-xfer -z foobar.cz -f foobar.cz.zone 1.2.3.4

SEE ALSO

       nsd(8), nsdc(8), nsd.conf(5), nsd-checkconf(8), nsd-notify(8), nsd-patch(8), zonec(8)

AUTHORS

       NSD was written by NLnet Labs and RIPE NCC joint team. Please see CREDITS file in the distribution for further details.

NLnet Labs							   jul 19, 2012 						       nsd-xfer(8)