pbs_resources_irix(7B)							PBS						    pbs_resources_irix(7B)

NAME

       pbs_resources_irix - pbs resources on SGI Irix

DESCRIPTION

       This  page  summarizes the resources supported by PBS for SGI workstations running IRIX 6.  These resources are specified by including them
       in the -l option argument on the qsub or qalter command or in the PBS job script.

RESOURCES

       cput	 Maximum amount of CPU time used by all processes in the job.  Units: time.

       file	 The largest size of any single file that may be created by the job.  Units: size.

       ncpus	 The number of processors requested.  Units: unitary.

       cpupercent
		 The maximum percentage of a cpu which the job used.  A value of 100 means 1 cpu.  This  cannot  be  set,  it  is  only  reported.
		 Units: percent.

       nice	 The nice value under which the job is to be run.  Units: unitary.

       nodemask  A  bit mask specifying the nodes (a pair of processors) to be associated with this job.  This resource is intended for use by PBS
		 to optimize processor allocation and direct use of this field by the job owner is discouraged.  Units: bit mask.

       pcput	 Maximum amount of CPU time used by any single process in the job.  Units: time.

       pmem	 Maximum amount of physical memory (workingset) used by any single process of the job.	Units: size.

       pvmem	 Maximum amount of virtual memory used by any single process in the job.  Units: size.

       vmem	 Maximum amount of virtual memory used by all concurrent processes in the job.	Units: size.

       walltime  Maximum amount of real time during which the job can be in the running state.	Units: time.

       arch	 Specifies the administrator defined system architecture requried.  This defaults to whatever the PBS_MACH string  is  set  to	in
		 "local.mk".  Units: string.

       host	 Name of host on which job should be run.  This resource is provided for use by the site's scheduling policy.	The allowable val-
		 ues and effect on job placement is site dependent.  Units: string.

       nodes	 Number and/or type of nodes to be reserved for exclusive use by the job.  The value is one or more node_specs joined with the '+'
		 character,  "node_spec[+node_spec...].  Each node_spec is an number of nodes required of the type declared in the node_spec and a
		 name or one or more properity or properities desired for the nodes.  The number, the name, and each properity	in  the  node_spec
		 are separated by a colon ':'.	If no number is specified, one(1) is assumed.	Units: string.

		 The name of a node is its hostname.  The properities of nodes are:

		 . ppn=# specifying the number of processors per node requested.  Defaults to 1.

		 . arbitrary  string  assigned by the system administrator, please check with your administrator as to the node names and properi-
		   ties available to you.

		 Examples:

		 . To ask for 12 nodes of any type: -l nodes=12

		 . To ask for 2 "server" nodes and 14 other nodes (a total of 16): -l nodes=2:server+14
		   The above consist of two node_specs "2:server" and "14".

		 . To ask for (a) 1 node that is a "server" and has a "hippi" interface, (b) 10 nodes that are not servers, and (c) 3  nodes  that
		   have a large amount of memory an have hippi:
		   -l nodes=server:hippi+10:noserver+3:bigmem:hippi

		 . To ask for three nodes by name:
		   -l nodes=b2005+b1803+b1813

		 . To ask for 2 processors on each of four nodes:
		   -l nodes=4:ppn=2

		 . To ask for 4 processors on one node:
		   -l nodes=1:ppn=4

		 . To ask for 2 processors on each of two blue nodes and three processors on one red node:
		   -l nodes=2:blue:ppn=2+red:ppn=3

       host	 Allows a user to specify the desired execution location.  This resource is provided for use by the site's scheduling policy.  The
		 allowable values and effect on job placement is site dependent.  Units: string.

       other	 Allows a user to specify site specific information.  This resource is provided for use by  the  site's  scheduling  policy.   The
		 allowable values and effect on job placement is site dependent.  Units: string.

       software  Allows  a  user to specify software required by the job.   This is useful if certain software packages are only available on cer-
		 tain systems in the site.  This resource is provided for use by the site's scheduling policy.	The allowable values and effect on
		 job placement is site dependent.  Units: string.

EXAMPLES

       qsub -l nodes=15,walltime=2:00:00 script

       or in a qsub script as a directive:

       #PBS -l nodes=15,walltime=2:00:00

       qsub -l cput=1:00:00,walltime=2:00:00,file=50gb,vmem=15mb script
       qalter -lcput=30:00,pmem=8mb 123.jobid

       or in a qsub script as a directive:

       #PBS -l cput=1:00:00,walltime=2:00:00,file=50gb,mem=15mb

RESOURCE UNITS

       The resource values take the following units:

       time    specifies a maximum time period the resource can be used.  Time is expressed in seconds as an integer, or in the form:
	       [[hours:]minutes:]seconds[.milliseconds]

       size    specifies  the  maximum	amount in terms of bytes or words.  It is expressed in the form integer[suffix] The suffix is a multiplier
	       defined in the following table, The size of a word is the word size on the execution host.

		b or  w    bytes or words.

	       kb or kw    Kilo(1024) bytes or words.

	       mb or mw    Mega (1,048,576) bytes or words.

	       gb or gw    Giga (1,073,741,824) bytes or words.

       unitary The maximum amount of a resource which is expressed as a simple integer.

SEE ALSO

       the PBS	ERS,  qsub(1B),  qalter(1B),  pbs_submit(3B),  pbs_alterjob(3B),  pbs_statjob(3b)  pbs_resources_aix4(7B),  pbs_resources_sp2(7B),
       pbs_resources_sunos4(7B), pbs_resources_unicos8(7B)

Local															    pbs_resources_irix(7B)