Obvious question but I have to ask...did you install and initialize ssh server on your Ubuntu box? That is needed before any ssh connections will work.
Since you do not have a dns server available on your network, you may have to use the physical ip address of the system, not the system name...hopefully you're not using dhcp for your ip address. Set it up for static ip...especially if it's on the same router as your windows box.
Your /etc/hosts file should have entries like this:
127.0.0.1 localhost
127.0.1.1 ubuntuhome
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
The errors you posted look very much like you don't have ssh server setup on that system.
Yes, I do. I even used ssh on my server to connect to my school's and had no problems.
All of what cat /etc/hosts shows is..
Only differs by the extra localhost ?
I have a network consisting of Linux Server, Win-Nt & 95 OS. I am able to connect from Linux to Win-NT using either ftp / telnet in time. But it takes me around & more than 50 seconds to connect from Wint -Nt/95 to Linux using either ftp/telnet. My network is small & it hardly consists 20-25... (3 Replies)
i have written a TCP client server application in c under unix. The windows systems should also be alowed to connect to the TCP server running on linux.So i wrote a small client application in VB using winsock. The client and server works fine in the linux environment. When i tried to connect the... (0 Replies)
Hi,
I am doin a project that'll work as a normal Explorer on Windows
but the best thing is it'll be exploring the content of a UNIX server.
The application would be runnin on the windows platform with probably a
FTP server on UNIX server.
How i should proceed? (2 Replies)
hello everyone. I tried searching for something related to this, but I figured it was time to ask my own question. I am experiencing these problems using Ubuntu 7.04
I am starting up a TCP listener/server and once connected, will act as a communication/control link with a program on another... (3 Replies)
Hello
i want to connect my solaris & Linux boxes to ntp server
i used the command
/usr/sbin/ntpdate -s -b -p 8 -u <NTP-IP>
and added the NTP server as server in /etc/ntp.conf
please help in completing the process and verifying it (1 Reply)
Hi,
I have a situation where i need to communicate a linux client with a windows server, I am using a UDP socket communication channel. I am able to send packets from my linux clients to the windows server but unable to receive any data packet from the server. Do i need to make any setting in... (0 Replies)
Hi,
One of the folders in UNIX is mapped with a drive on Windows.From this UNIX machine I want to connect to the Windows Server, perform some checks and view the results back on the UNIX machine.
For e.g. if I touch a file under the shared folder on UNIX, I should be able to telnet to Windows... (2 Replies)
Hi experts - I hope you can help me.
I am trying to resolve Windows host names (aka Netbios names, aka "UNC names) from a Linux box.
I have added "dns wins" to the "hosts" line at /etc/nsswitch.conf, and installed samba 3.2.2 and ran "winbindd -D".
Now, when I go: "wbinfo -N venus" (where... (1 Reply)
I am trying to connect to a Windows server say 10.1.1.10. This servers has a folder named RAJ in which there are multiple .zip files. All these zip files contain a text file called XYZ.txt. Now i have to merge the content of these XYZ.txt files from each of the .zip file and create a new text... (1 Reply)
I'm trying to setup a small home network environment as a pet project. These are physical machines nothing virtual. Any help or ideas is greatly appreciated.
I can ping between both machines and I have Samba established and can read/write different shares. When I try to SSH from Windows 8.1... (10 Replies)
Discussion started by: lombardi4851
10 Replies
LEARN ABOUT ULTRIX
sftp-server
sftp-server(1M) System Administration Commands sftp-server(1M)NAME
sftp-server - SFTP server subsystem
SYNOPSIS
/usr/lib/ssh/sftp-server
DESCRIPTION
sftp-server implements the server side of the SSH File Transfer Protocol as defined in the IETF draft-ietf-secsh-filexfer.
sftp-server is a subsystem for sshd(1M) and must not be run directly. There are no options or config settings.
To enable the sftp-server subsystem for sshd add the following to /etc/ssh/sshd_config:
Subsystem sftp /usr/lib/ssh/sftp-server
See sshd_config(4) for a description of the format and contents of that file.
There is no relationship between the protocol used by sftp-server and the FTP protocol (RFC 959) provided by in.ftpd.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
FILES
/usr/lib/sftp-server
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWsshdu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO sftp(1), ssh(1), ssh-add(1), ssh-keygen(1), sshd(1M), sshd_config(4), attributes(5)
To view license terms, attribution, and copyright for OpenSSH, the default path is /var/sadm/pkg/SUNWsshdr/install/copyright. If the
Solaris operating environment has been installed anywhere other than the default, modify the given path to access the file at the installed
location.
AUTHOR
Markus Friedl
SunOS 5.10 30 Jul 2003 sftp-server(1M)