I need a dhcp congfigured to give some of my clients IP regarding their MAC addresses and rest should get any IP from same pool. I am not sure what to add dhcpd.conf to provide such a pool or group or class. I tried with this but seems not good enough.
<<<<dhcpd.conf>>>>
Waiting for any suggestions...
thanks
Last edited by otheus; 01-30-2009 at 05:07 AM..
Reason: [code]tags and formatting added
Hi sir,
i want to make such programe which takes MAC(Ethernet) address of any host & give me its IP address.......
but i'm nt getting that how i can pass the MAC address to Frame........
Please give me an idea for making such program...
Thanks & regards
Krishna (3 Replies)
I have a new solaris machine and I am trying to bring the same on network. The IP assignemnt is via DHCP. I want to know as which files need to be modified to include DHCP server IP in order that the machine gets its IP via DHCP server.
Thanks in Advance. :) (1 Reply)
Hi ,
when i configure my server with a fixed ip address in dhcpd.conf as below
subnet 172.21.151.0 netmask 255.255.255.0 {
range 172.21.151.66 172.21.151.66;
}
host switch {
hardware ethernet 00:05:30:02:DB:31;
fixed-address 172.21.151.66;
}
when i start dhcpd server , it... (2 Replies)
Hi to all.
Sorry for my bad english.
For pure self-educational, not professional, purposes, I am studying how to configure a server with several services operating on it.
For my experiment I'm using VirtualBox 3.1.4 on a WinXP host with 3 FreeBSD guests; one acts as a DHCP + DNS server; the... (0 Replies)
Hi there
I lost connectivity to one of our remote systems and when I checked the messages log I found the following:
Aug 10 23:42:34 host xntpd: time reset (step) 1.681729 s
Aug 16 13:20:51 host ip: WARNING: node "mac address" is using our IP address x.x.x.x on aggr1
Aug 16 13:20:51 host... (9 Replies)
Hello Friends,
I am looking for the configuration steps to enable option 90 on Linux DHCP server.Also i need to add secret id to be configured for option 90.
can someone help me in providing the steps with parameter values .
Thanks in advance,
Veera (0 Replies)
four interfaces with ifconfig
all interfaces have the same mac. If is not set for unique.
but it still works.
what difference does it make to have all macs the same or different? (4 Replies)
Discussion started by: rrodgers
4 Replies
LEARN ABOUT PLAN9
dhcp
dhcp(5) Standards, Environments, and Macros dhcp(5)NAME
dhcp - Dynamic Host Configuration Protocol
DESCRIPTION
Dynamic Host Configuration Protocol (DHCP) enables host systems in a TCP/IP network to be configured automatically for the network as they
boot. DHCP uses a client/server mechanism: servers store configuration information for clients, and provide that information upon a
client's request. The information can include the client's IP address and information about network services available to the client.
This manual page provides a brief summary of the Solaris DHCP implementation.
Solaris DHCP Client
The Solaris DHCP client is implemented as background daemon, dhcpagent(1M). This daemon is started automatically during bootup if there
exists at least one dhcp.interface file in /etc. Only interfaces with a corresponding /etc/dhcp.interface file are automatically configured
during boot. Network parameters needed for system configuration during bootup are extracted from the information recieved by the daemon
through the use of the dhcpinfo(1) command. The daemon's default behavior can be altered by changing the tunables in the /etc/default/dhc-
pagent file. The daemon is controlled by the ifconfig(1M) utility. Check the status of the daemon using the netstat(1M) and ifconfig(1M)
commands.
Solaris DHCP Server
The Solaris DHCP server is implemented as a background daemon, in.dhcpd(1M). This daemon can deliver network configuration information to
either BOOTP or DHCP clients. The Solaris DHCP service can be managed using the dhcpmgr(1M) GUI or the command line utilities dhcpcon-
fig(1M), dhtadm(1M), and pntadm(1M).
DHCP Configuration Tables
The Solaris DHCP server stores client configuration information in the following two types of tables:
dhcptab tables Contain macros and options (also known as symbols), used to construct a package of configuration information to
send to each DHCP client. There exists only one dhcptab for the DHCP service. The dhcptab(4) can be viewed and mod-
ified using the dhtadm(1M) command or dhcpmgr(1M) graphical utility. See dhcptab(4) for more information about the
syntax of dhcptab records. See dhcp_inittab(4) for more information about the DHCP options and symbols.
DHCP network tables DHCP network tables, which contain mappings of client IDs to IP addresses and parameters associated with those
addresses. Network tables are named with the IP address of the network, and can be created, viewed, and modified
using the pntadm command or dhcpmgr graphical utility. See dhcp_network(4) for more information about network
tables.
SEE ALSO dhcpinfo(1), dhcpagent(1M), dhcpconfig(1M), dhcpmgr(1M), dhtadm(1M), ifconfig(1M), in.dhcpd(1M), netstat(1M), pntadm(1M), syslog(3C),
dhcp_network(4), dhcptab(4), dhcpsvc.conf(4), dhcp_inittab(4), dhcp_modules(5)
Solaris DHCP Service Developer's Guide
Alexander, S., and R. Droms. RFC 2132, DHCP Options and BOOTP Vendor Extensions. Silicon Graphics, Inc. Bucknell University. March 1997.
Droms, R. RFC 1534, Interoperation Between DHCP and BOOTP. Bucknell University. October 1993.
Droms, R. RFC 2131, Dynamic Host Configuration Protocol. Bucknell University. March 1997.
Wimer, W. RFC 1542, Clarifications and Extensions for the Bootstrap Protocol. Carnegie Mellon University. October 1993.
SunOS 5.10 13 Mar 2001 dhcp(5)