FS_SETCACHESIZE(1)					       AFS Command Reference						FS_SETCACHESIZE(1)

NAME

       fs_setcachesize - Sets the size of the disk cache

SYNOPSIS

       fs setcachesize [-blocks <size (0 = reset)>>] [-reset] [-help]

       fs setca [-b <size (0 = reset)>>] [-r] [-h]

       fs cachesize [-b <size (0 = reset)>>] [-r] [-h]

       fs ca [-b <size (0 = reset)>>] [-r] [-h]

DESCRIPTION

       The fs setcachesize command changes the number of kilobyte blocks of local disk space available to the Cache Manager for its data cache, on
       machines that use a disk cache. The command is not operative on machines that use a memory cache.

       To return the cache size to the default value specified in the third field of the local /etc/openafs/cacheinfo file, provide a value of 0
       to the -blocks argument.

       To return the cache size to the value set when the machine was last rebooted, use the -reset flag instead of the -blocks argument. This is
       normally the amount specified in the cacheinfo file, unless the -blocks argument was included on the afsd command to override the cacheinfo
       value.

       To display the current cache size and amount of cache in use, for both disk and memory caches, use the fs getcacheparms command.

CAUTIONS

       This command is not operative on machines using a memory cache, and results in an error message. To change memory cache size, edit the
       cacheinfo file and reboot, or reboot and provide the -blocks argument to the afsd command.

       On machines using a disk cache, do not set the cache size to exceed 85% to 90% of the actual disk space available for the cache directory.
       The cache implementation itself requires a small amount of space on the partition.

OPTIONS

       -blocks <size>
	   Specifies the amount of disk space available for the Cache Manager to devote to the cache.  The size should be a positive integer
	   followed by an optional suffix: "K" for kibibytes (1024 bytes, the default), "M" for mebibytes (1024 kibibytes), "G" for gibibytes
	   (1024 mebibytes), and "T" for tebibytes (1024 gibibytes).  Provide a value of 0 to set cache size to the default specified in the
	   cacheinfo file.

       -reset
	   Returns the cache size to the value set when the machine was last booted. This agrees with the value in the cacheinfo file unless the
	   -blocks argument was used on the afsd command.

       -help
	   Prints the online help for this command. All other valid options are ignored.

EXAMPLES

       The following command sets the disk cache size to 25000 kilobyte blocks.

	  % fs setcachesize -blocks 25000

       Both of the following commands reset the disk cache size to the value in the cacheinfo file, assuming that the -blocks argument to the afsd
       command was not used.

	  % fs setcachesize -blocks 0
	  % fs setcachesize -reset

PRIVILEGE REQUIRED

       The issuer must be logged in as the local superuser root.

SEE ALSO

       cacheinfo(5), afsd(8), fs_getcacheparms(1)

COPYRIGHT

       IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.

       This documentation is covered by the IBM Public License Version 1.0.  It was converted from HTML to POD by software written by Chas
       Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.

OpenAFS 							    2012-03-26							FS_SETCACHESIZE(1)