01-19-2009
did you do devfsadm -C -c disk? Then see you can see any disks under format..
post the output of iostat -En |grep Hard
/var/adm/messages -->any errors?
you should have 2 more disks on your server, if they are in use, then ok. If not, label the disk.
cd to /dev/dsk and perform ls. you should see the ext raw disks in there..
"If a reconfiguration reboot is done, the system reports the new disk. But only with a reboot. " <--- so whats the problem?
10 More Discussions You Might Find Interesting
1. Solaris
Hi,
I have a T2000 box connected to very slow disks (EMC SAN ATA disks) by a double port hba through a fabric topology. RAID 5 (6+1) configuration.
The issue is using RMAN for backup and validation psent almost twice the time than with a V880 Fire connected the same way.
As with the... (2 Replies)
Discussion started by: freezer91
2 Replies
2. Solaris
I have an issue with DNS on a solaris t2000
When I set up the zones there was an issue with the /etc/resolv.conf, I had made a typo in my DNS server.
I only noticed this after creating my new zones.
I have corrected this in the global zone and I am now able to ping and nslookup inthe... (2 Replies)
Discussion started by: james dewitt
2 Replies
3. Linux
Hi frnds,
what is the devfsadm(solaris) equivalent command in linux os?
Thanks in Adv.
Arjun Reddy. (2 Replies)
Discussion started by: arjunreddy3
2 Replies
4. Solaris
Hi,
I have a netra t2000 running solaris 10. It is fully patched with the latest patch cluster and also patch 118833-36 and 126897-02. The SC sys_event level is set to 3.
I am running a test to show hardware log status, e.g simulating a power supply failure.Hence I unplug one of te... (3 Replies)
Discussion started by: ulemsee
3 Replies
5. Solaris
Hi, a couple of T2000 servers did not show the component status and the output was too short. There was a patch that needed to be installed. I also updated to the latest recommended patch cluster and OBP patch.
After reboot/restart of picl, it worked ok for a couple of weeks. Then suddenly it went... (12 Replies)
Discussion started by: incredible
12 Replies
6. Solaris
Hi All
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
Discussion started by: ouzist
1 Replies
7. Solaris
Hi All,
I recently had issues with my new T2000 server. I purchased a new mainboard and swapped the CPU and DIMMs to the new board. Now when i power on the server im unable to do so. I get the following error:
‘SC Alert: Host system poweron failed due to fault at MB/FF_POK.'
When i do... (2 Replies)
Discussion started by: Caully
2 Replies
8. Solaris
Hi all,
First post so be gentile :)
It's my first time installing Solaris on T2000 server.
I have 2 72GB HD's on it.
After configuring HW raid and running raidctl command I get this output:
bash-3.00# raidctl -l c0t0d0
Volume Size Stripe Status Cache RAID
... (2 Replies)
Discussion started by: Obi-Wan
2 Replies
9. Solaris
hi all
when i trying to give auto-boot value as false as following
#eeprom auto-boot?=false
it is showing as
zsh: no matches found: auto-boot?=false
so felt this is because of error in hard ware so i tried this
#iostat -en
it is showing like
iostat -en
---- errors ---
s/w h/w trn... (4 Replies)
Discussion started by: wkbn86
4 Replies
10. Solaris
Our SunFire 480 - one of the boot disks failed. It is mirrored with VxVm. I followed the exact steps that is detailed in the veritas and sun guides (I can not post the URL since I don't have 5 posts yet.)
After removing the failed disk, I ran devfsadm -C -c disk and it still shows the device... (7 Replies)
Discussion started by: jtamminen
7 Replies
LEARN ABOUT DEBIAN
devfsadm
devfsadm(1M) System Administration Commands devfsadm(1M)
NAME
devfsadm, devfsadmd - administration command for /dev
SYNOPSIS
/usr/sbin/devfsadm [-C] [-c device_class] [-i driver_name] [ -n] [-r root_dir] [-s] [-t table_file] [-v]
/usr/lib/devfsadm/devfsadmd
DESCRIPTION
devfsadm(1M) maintains the /dev namespace. It replaces the previous suite of devfs administration tools including drvconfig(1M), disks(1M),
tapes(1M), ports(1M), audlinks(1M), and devlinks(1M).
The default operation is to attempt to load every driver in the system and attach to all possible device instances. Next, devfsadm creates
logical links to device nodes in /dev and /devices and loads the device policy.
devfsadmd(1M) is the daemon version of devfsadm(1M). The daemon is started during system startup and is responsible for handling both
reconfiguration boot processing and updating /dev and /devices in response to dynamic reconfiguration event notifications from the kernel.
For compatibility purposes, drvconfig(1M), disks(1M), tapes(1M), ports(1M), audlinks(1M), and devlinks(1M) are implemented as links to
devfsadm.
In addition to managing /dev, devfsadm also maintains the path_to_inst(4) database.
OPTIONS
The following options are supported:
-C Cleanup mode. Prompt devfsadm to cleanup dangling /dev links that are not normally removed. If the -c option is
also used, devfsadm only cleans up for the listed devices' classes.
-c device_class Restrict operations to devices of class device_class. Solaris defines the following values for device_class: disk,
tape, port, audio, and pseudo. This option might be specified more than once to specify multiple device classes.
-i driver_name Configure only the devices for the named driver, driver_name.
-n Do not attempt to load drivers or add new nodes to the kernel device tree.
-s Suppress any changes to /dev. This is useful with the -v option for debugging.
-t table_file Read an alternate devlink.tab file. devfsadm normally reads /etc/devlink.tab.
-r root_dir Presume that the /dev directory trees are found under root_dir, not directly under root (/). No other use or
assumptions are made about root_dir.
-v Print changes to /dev in verbose mode.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
1 An error occurred.
FILES
/devices device nodes directory
/dev logical symbolic links to /devices
/usr/lib/devfsadm/devfsadmd devfsadm daemon
/dev/.devfsadm_dev.lock update lock file
/dev/.devfsadm_daemon.lock daemon lock file
/etc/security/device_policy device policy file
/etc/security/extra_privs additional device privileges
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO
svcs(1), add_drv(1M), modinfo(1M), modload(1M), modunload(1M), rem_drv(1M), svcadm(1M), tapes(1M), path_to_inst(4), attributes(5), privi-
leges(5), smf(5), devfs(7FS)
NOTES
This document does not constitute an API. The /devices directory might not exist or might have different contents or interpretations in a
future release. The existence of this notice does not imply that any other documentation that lacks this notice constitutes an API.
devfsadm no longer manages the /devices name space. See devfs(7FS).
The device configuration service is managed by the service management facility, smf(5), under the service identifier:
svc:/system/device/local:default
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser-
vice's status can be queried using the svcs(1) command.
SunOS 5.10 6 Aug 2004 devfsadm(1M)