Failed Drive Post: 302277877

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

2. UNIX for Dummies Questions & Answers

Map Drive From Windows To Apache Shared Drive?

Anyone know how I can map a windows drive to an apache shared drive? In my httpd.conf file, I have: Alias /merc_rpts/ "/u/merc_rpts/" <Directory "/u/merc_rpts"> Options Indexes </Directory> I'm able to bring up a browser and see the contents of this folder. In...

3. SCO

mounting USB floppy drive /Flash drive in OSR 6.0

Can anybody help me out to mount USB flash /floppy drive in sco openserver 6.0 .

4. AIX

SFTP Failed---Request for subsystem 'sftp' failed on channel 0

Hi, While I am trying SFTP my machine to another unix machine , it was working fine till 10 min back. But now i am getting the below error "Request for subsystem 'sftp' failed on channel 0" Could you please someone help me to solve or analyise the root cause... Cheers:b:, Mahiban

5. Hardware

How to Clone a Drive with 512 byte Sectors to a Drive with 4096 bytes/sector (AF)?

I have a 320 GB drive which dual boots Windows and Debian: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal):...

6. UNIX for Dummies Questions & Answers

Need help to move .csv file from UNIX path to windows shared drive or c:\ drive

Hi Guys, Can any one help me on this. I need help to move .csv/.xls file from unix path to windows shared drive or c:\ drive? Regards, LKR

7. AIX

RAID 10 Failed Drive Swap

I am new to the AIX operating system and am seeking out some advice. We recently have had a drive go bad on our AIX server that is in a RAID 10 array. We have a replacement on the way. I was wondering what the correct steps are to swap out this drive. Does the server need to be powered off? Or can...

8. Solaris

Replace failed drive in pool

I am not very savvy with Solaris but am responsible for a server running Solaris 10 that has a failed hard drive in a mirrored pool. I ordered a new drive and attempted to install but received the error "device too small" when using zpool replace. The drive is the same Seagate model number as the...

9. Solaris

Drive is showing offline in the /var/adm/messages and shows "drive type unknown" in the format outpu

Hi, I am facing issue with one of the drive is solaris 10. it is showing offline in the messages file scsi: WARNING: /pci@2,600000/QLGC,qlc@0/fp@0,0/ssd@w5006016746e00b1b,0 (ssd0): drive offline genunix: WARNING: Page83 data not standards compliant DGC LUNZ 0430 ...

LEARN ABOUT X11R4

perlmacos

PERLMACOS(1)						 Perl Programmers Reference Guide					      PERLMACOS(1)

NAME

       README.macos - Perl under Mac OS (Classic)

SYNOPSIS

       This document briefly describes perl under Mac OS (Classic).  If you are running perl under Mac OS X, you don't want to be here (unless you
       are in the Classic environment under Mac OS X).

       When we say "Mac OS" below, we mean Mac OS 7, 8, and 9, and not Mac OS X.

DESCRIPTION

       The latest perl source itself builds on Mac OS, with some additional pieces. Support for Mac OS is now in the perl core, and MacPerl is
       kept in close sync with regular perl releases.

       To build perl for Mac OS (as an MPW tool), you will need the addition of the macos subdirectory, distributed separately.  It includes extra
       source files, config files, and make files.  It also includes extra Mac-specific modules.

       To build the MacPerl application, you will also need the macperl directory, which includes the source files for creating the application
       itself.

       All of this is available from the development site, via HTTP (in the MacPerl Installer, which includes all the source and binaries) and
       anonymous CVS.

	       http://dev.macperl.org/

       The source is also in the main perl repository in the macperl branch (the 5.6 source is in the maint-5.6/macperl branch).

       You will also need compilers and libraries, all of them freely available.  These are linked to from the SourceForge site. Go that site for
       all things having to do with MacPerl development.

       MacPerl 5.6.1 and later are supported on Mac OS 8.1 and later, for 68040 and PowerPC architectures.  The MPW tool may be used on Mac OS
       7.5.5 and 68030 computers.

       MacPerl 5.2.0r4 is also available, on the CPAN and on SourceForge.  It is based on perl 5.004, and works with Mac OS 7.5.5 and 68030 com-
       puters.

AUTHOR

       perl was ported to Mac OS by Matthias Neeracher <neeracher@mac.com>.  It is currently maintained by Chris Nandor <pudge@pobox.com>.

DATE

       Last modified 2002.05.02.

perl v5.8.9							    2007-11-17							      PERLMACOS(1)