Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Mount /usr as a separate filesystem
Operating Systems Solaris Mount /usr as a separate filesystem Post 302277645 by Sun Fire on Saturday 17th of January 2009 06:06:06 AM
Old 01-17-2009
MySQL
I have done it before, this is what I have done:

1. First, you should have enough space on another slice.

2. partition this slice.

3. create new file system on that slice.

4. go to SINGLE USER MODE , this is essential as you are moving OS file system, it won't work unless you do it in SINGLE USER mode

Code:
# init S


5. then, mount the slice you create on a temporary directory, such as /mnt

6. do this:

Code:
# ufsdump 0uf - /usr | (cd /mnt; ufsrestore rf -)

this will take about 15 minutes or so, depends, just make sure you are in single user mode.


7. do this

Code:
# cd /mnt

# rm restoremytable



8. you will have a small problem now, if you do

Code:
# ls /mnt

lost+found usr

the problem you will find a directory inside /mnt called "usr" which means you will have to do the following:

Code:
# cd /mnt/usr

# cp -Rp * /mnt



9. After you finish the copy do this:

Code:
 
# cd /mnt

# rm -R usr


10. Last step is, edit /etc/vfstab, and add an entry to mount /usr from the new slice, then reboot.


I've done this and tested, it worked perfectly. I tried it with /usr and with /var

Good luck.
 

10 More Discussions You Might Find Interesting

1. Solaris

Boot problem: failed to mount /usr

My Solaris10 cannot boot after I made an error when apending the vfstab to: dev to mount======/dev/dsk/c0d0p1:1 device to fsck====== <blank> mount pt=========/Data FS Type==========pcfs fsck pass=========- mount at boot=====yes mount options===== <blank> My 'Data' partition is a... (3 Replies)
Discussion started by: maag
3 Replies

2. Filesystems, Disks and Memory

how can I extend /usr filesystem

How can extend /usr filesystem in hp-ux 11.11 (I'm not using online JFS) ? (0 Replies)
Discussion started by: pedro_lezaeta
0 Replies

3. Solaris

/usr unable to mount

Hi All, I need help on this issue and it is a production server. /usr is unable to mount and make system can't even type any commands. Only this show and no changes makes to the system. ERROR: svc:/system/filesystem/root:default failed to mount /usr (see 'svcs -x' for details) ... (3 Replies)
Discussion started by: mailbox80
3 Replies

4. AIX

/usr/nsr needing cleanup (filesystem 100%)

Hi, got a nice surprise this morning. I have an alert saying I have a server with the filesystem /usr/nsr full at 100%. Upon looking at its content I have no idea what to clean up. The only files that were created within the past few days are kind of small. So I suspect it was always almost... (3 Replies)
Discussion started by: Browser_ice
3 Replies

5. Solaris

smf fails to mount svc:/system/filesystem/usr:default

http://i44.tinypic.com/2cmq7vn.jpg Please help me on this issue i'm using solaris on vmware x86 even i runed fsck on root disk like 'fsck -Y /dev/rdsk/c0d0s0 ' but again after reboot it is going to maintanance mode reply soon (6 Replies)
Discussion started by: knl.sundeep
6 Replies

6. HP-UX

/usr out of disk space need to unmount/ expand volume /mount

Greetings, I am running HP-UX 10.2 and /usr is out of disk space already. I installed IE 5.0 for UNIX on my machine under /usr and browsed the Internet for a while and presto no more disk space. I have plenty of hard disk space on my computer so would like to expand the size of the volume. The... (5 Replies)
Discussion started by: Dirk_
5 Replies

7. AIX

What is the cause of USR filesystem full

we are using aix 5.3 and we notice that the filesystem /usr is almost full. we have an oracle database running on the server.what are the cause why this filesystem is almost full.what should we do to free some space on this filesystem beside increase the size?thanks (4 Replies)
Discussion started by: paulexis
4 Replies

8. AIX

Increasing ./usr or any filesystem

Hi guys, I want to increase my ./usr or just one path in my aix6.1 machine. currently if I # lsvg rootvg VOLUME GROUP: rootvg VG IDENTIFIER: 00f6126500004c00000 0012aef0c9035 VG STATE: active PP SIZE: 128... (2 Replies)
Discussion started by: pilotHans
2 Replies

9. AIX

Mount Filesystem in AIX Unable to read /etc/filesystem

Dear all, We are facing prolem when we are going to mount AIX filesystem, the system returned the following error 0506-307The AFopen call failed : A file or directory in the path name does not exist. But when we ls filesystems in the /etc/ directory it show -rw-r--r-- 0 root ... (2 Replies)
Discussion started by: m_raheelahmed
2 Replies

10. Solaris

Failed to mount /usr

I recently ran the Solaris 10 upgrade 10 and everything went fine. About 2 months later after rebooting and getting ready to load the latest upgrade that came out, I am getting this error. ERROR: svc:/system/filesytem/root: default failed to mount /usr (see 'svc -x' for details) ... (6 Replies)
Discussion started by: drew_1980
6 Replies

LEARN ABOUT DEBIAN

sdl::gfx::imagefilter

pods::SDL::GFX::ImageFilter(3pm)			User Contributed Perl Documentation			  pods::SDL::GFX::ImageFilter(3pm)

NAME

       SDL::GFX::ImageFilter - image filtering functions

CATEGORY

       TODO, GFX

METHODS

   MMX_detect
       int gfx_image_MMX_detect()      CODE:	       SDL_imageFilterMMXdetect();

   MMX_off
       void gfx_image_MMX_off()      CODE:	     SDL_imageFilterMMXoff();

   MMX_on
       void gfx_image_MMX_on()	    CODE:	    SDL_imageFilterMMXon();

   add
       int gfx_image_add(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterAdd(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   mean
       int gfx_image_mean(Src1, Src2, Dest, length)	 unsigned char *Src1	  unsigned char *Src2	   unsigned char *Dest	    int length
	    CODE:	    RETVAL = SDL_imageFilterMean(Src1, Src2, Dest, length);	 OUTPUT:	   RETVAL

   sub
       int gfx_image_sub(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterSub(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   abs_diff
       int gfx_image_abs_diff(Src1, Src2, Dest, length)      unsigned char *Src1      unsigned char *Src2      unsigned char *Dest	int length
	    CODE:	    RETVAL = SDL_imageFilterAbsDiff(Src1, Src2, Dest, length);	    OUTPUT:	      RETVAL

   mult
       int gfx_image_mult(Src1, Src2, Dest, length)	 unsigned char *Src1	  unsigned char *Src2	   unsigned char *Dest	    int length
	    CODE:	    RETVAL = SDL_imageFilterMult(Src1, Src2, Dest, length);	 OUTPUT:	   RETVAL

   mult_nor
       int gfx_image_mult_nor(Src1, Src2, Dest, length)      unsigned char *Src1      unsigned char *Src2      unsigned char *Dest	int length
	    CODE:	    RETVAL = SDL_imageFilterMultNor(Src1, Src2, Dest, length);	    OUTPUT:	      RETVAL

   mult_div_by_2
       int gfx_image_mult_div_by_2(Src1, Src2, Dest, length)	  unsigned char *Src1	   unsigned char *Src2	    unsigned char *Dest      int
       length	   CODE:	   RETVAL = SDL_imageFilterMultDivby2(Src1, Src2, Dest, length);      OUTPUT:		RETVAL

   mult_div_by_4
       int gfx_image_mult_div_by_4(Src1, Src2, Dest, length)	  unsigned char *Src1	   unsigned char *Src2	    unsigned char *Dest      int
       length	   CODE:	   RETVAL = SDL_imageFilterMultDivby4(Src1, Src2, Dest, length);      OUTPUT:		RETVAL

   bit_and
       int gfx_image_bit_and(Src1, Src2, Dest, length)	    unsigned char *Src1      unsigned char *Src2      unsigned char *Dest      int length
	    CODE:	    RETVAL = SDL_imageFilterBitAnd(Src1, Src2, Dest, length);	   OUTPUT:	     RETVAL

   bit_or
       int gfx_image_bit_or(Src1, Src2, Dest, length)	   unsigned char *Src1	    unsigned char *Src2      unsigned char *Dest      int length
	    CODE:	    RETVAL = SDL_imageFilterBitOr(Src1, Src2, Dest, length);	  OUTPUT:	    RETVAL

   div
       int gfx_image_div(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterDiv(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   bit_negation
       int gfx_image_bit_negation(Src1, Dest, length)	   unsigned char *Src1	    unsigned char *Dest      int length      CODE:
		 RETVAL = SDL_imageFilterBitNegation(Src1, Dest, length);      OUTPUT:		 RETVAL

   add_byte
       int gfx_image_add_byte(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterAddByte(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   add_uint
       int gfx_image_add_uint(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned int C
	    CODE:	    RETVAL = SDL_imageFilterAddUint(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   add_byte_to_half
       int gfx_image_add_byte_to_half(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char
       C      CODE:	      RETVAL = SDL_imageFilterAddByteToHalf(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   sub_byte
       int gfx_image_sub_byte(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterSubByte(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   sub_uint
       int gfx_image_sub_uint(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned int C
	    CODE:	    RETVAL = SDL_imageFilterSubUint(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   shift_right
       int gfx_image_shift_right(Src1, Dest, length, N)      unsigned char *Src1      unsigned char *Dest      int length      unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftRight(Src1, Dest, length, N);	    OUTPUT:	      RETVAL

   shift_right_uint
       int gfx_image_shift_right_uint(Src1, Dest, length, N)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char
       N      CODE:	      RETVAL = SDL_imageFilterShiftRightUint(Src1, Dest, length, N);	  OUTPUT:	    RETVAL

   mult_by_byte
       int gfx_image_mult_by_byte(Src1, Dest, length, C)      unsigned char *Src1      unsigned char *Dest	int length	unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterMultByByte(Src1, Dest, length, C);	    OUTPUT:	      RETVAL

   shift_right_and_mult_by_byte
       int gfx_image_shift_right_and_mult_by_byte(Src1, Dest, length, N, C)	 unsigned char *Src1	  unsigned char *Dest	   int length
	    unsigned char N	 unsigned char C      CODE:	      RETVAL = SDL_imageFilterShiftRightAndMultByByte(Src1, Dest, length, N, C);
	    OUTPUT:	      RETVAL

   shift_left_byte
       int gfx_image_shift_left_byte(Src1, Dest, length, N)	 unsigned char *Src1	  unsigned char *Dest	   int length	   unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeftByte(Src1, Dest, length, N);      OUTPUT:		 RETVAL

   shift_left_uint
       int gfx_image_shift_left_uint(Src1, Dest, length, N)	 unsigned char *Src1	  unsigned char *Dest	   int length	   unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeftUint(Src1, Dest, length, N);      OUTPUT:		 RETVAL

   shift_left
       int gfx_image_shift_left(Src1, Dest, length, N)	    unsigned char *Src1      unsigned char *Dest      int length      unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeft(Src1, Dest, length, N);	   OUTPUT:	     RETVAL

   binarize_using_threshold
       int gfx_image_binarize_using_threshold(Src1, Dest, length, T)	  unsigned char *Src1	   unsigned char *Dest	    int length
	    unsigned char T	 CODE:		 RETVAL = SDL_imageFilterBinarizeUsingThreshold(Src1, Dest, length, T);      OUTPUT:
		 RETVAL

   clip_to_range
       int gfx_image_clip_to_range(Src1, Dest, length, Tmin, Tmax)	unsigned char *Src1	 unsigned char *Dest	  int length	  unsigned
       char Tmin      unsigned char Tmax      CODE:	      RETVAL = SDL_imageFilterClipToRange(Src1, Dest, length, Tmin, Tmax);	OUTPUT:
		 RETVAL

   normalize_linear
       int gfx_image_normalize_linear(Src1, Dest, length, Cmin, Cmax, Nmin, Nmax)      unsigned char *Src1	unsigned char *Dest	 int
       length	   int Cmin	 int Cmax      int Nmin      int Nmax	   CODE:	   RETVAL = SDL_imageFilterNormalizeLinear(Src1, Dest,
       length, Cmin, Cmax, Nmin, Nmax);      OUTPUT:	       RETVAL

   convolve_kernel_3x3_divide
       int gfx_image_convolve_kernel_3x3_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel3x3Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_5x5_divide
       int gfx_image_convolve_kernel_5x5_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel5x5Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_7x7_divide
       int gfx_image_convolve_kernel_7x7_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel7x7Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_9x9_divide
       int gfx_image_convolve_kernel_9x9_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel9x9Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_3x3_shift_right
       int gfx_image_convolve_kernel_3x3_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel3x3ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_5x5_shift_right
       int gfx_image_convolve_kernel_5x5_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel5x5ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_7x7_shift_right
       int gfx_image_convolve_kernel_7x7_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel7x7ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_9x9_shift_right
       int gfx_image_convolve_kernel_9x9_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel9x9ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   sobel_x
       int gfx_image_sobel_x(Src, Dest, rows, columns)	    unsigned char *Src	    unsigned char *Dest      int rows	   int columns	    CODE:
		 RETVAL = SDL_imageFilterSobelX(Src, Dest, rows, columns);	OUTPUT: 	  RETVAL

   sobel_x_shift_right
       int gfx_image_sobel_x_shift_right(Src, Dest, rows, columns, NRightShift)      unsigned char *Src      unsigned char *Dest      int rows
	    int columns      unsigned char NRightShift	    CODE:	    RETVAL = SDL_imageFilterSobelXShiftRight(Src, Dest, rows, columns,
       NRightShift);	  OUTPUT:	    RETVAL

   align_stack
       void gfx_image_align_stack()	 CODE:		 SDL_imageFilterAlignStack();

   restore_stack
       void gfx_image_restore_stack()	   CODE:	   SDL_imageFilterRestoreStack();

AUTHORS

       See "AUTHORS" in SDL.

perl v5.14.2							    2012-05-28					  pods::SDL::GFX::ImageFilter(3pm)
All times are GMT -4. The time now is 06:13 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy