Ifconfig output - help understanding flags 'Smart, Simplex', etc Post: 302276730

9 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

flags to suppress column output, # of rows selected in db2 sql in UNIX

Hello, I am new to db2 SQL in unix so bear with me while I try to explain the situation. I have a text file that has the contents of the where condition that I am using for a db2 SQL in UNIX ksh. Here is the snippet. if ; then echo "Begin processing VALUEs" ...

2. IP Networking

arp output (flags)

I'm running an arp -an on a Solaris 10 box. We're using IPMP. One of the systems is not able to see a host on the same network. The only difference between the two systems (one is having a problem, the other isn't) at least so far is the output of arp: # arp -an | grep 224.55 e1000g5...

3. Shell Programming and Scripting

Understanding the output of TOP

ok, so I have a script im running on a linux box that uses "egrep" a lot. now, when i run this script, i check the TOP to see how much system resource it is using. the "top" command gives the following output: last pid: 25384; load avg: 1.06, 1.04, 0.76; up 351+06:30:24 ...

4. UNIX for Dummies Questions & Answers

Explain the difference between the commands cd ~smart and cd ~/smart

Is it possible for both commands to work?

5. UNIX for Dummies Questions & Answers

Understanding nm command output

After running nm command on any object file from out put can we get to know that wheather a symbol is a call to a function or definition of function ? I am searching a class and function definitions inside many .so files. I have 3 files which contain the symbol but I don't know wheather they...

6. Shell Programming and Scripting

parsing ifconfig output

I'm trying to gather information on the interfaces on a large number of servers. If I run ifconfig I will get: eth0 Link encap:Ethernet HWaddr 00:50:56:A2:27:C1 inet addr:10.145.xxx.xxx Bcast:10.152.45.255 Mask:255.255.254.0 ----- eth1 Link...

7. UNIX for Dummies Questions & Answers

Ifconfig Flags

Hi there, I need your help in understanding the below Solaris 10 ifconfig output; athnetspns02>ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 e1000g0:...

8. Shell Programming and Scripting

Grabbing IP and zonename from multiline 'ifconfig' output

Hi There, I have a Solaris server that has a bunch of zones configured and I am trying to write a script that will take all interfaces other than the loopback ones (e.g. lo0:3 etc) and present them so that I can easily determine the zone that owns the IP So in the case of the following...

9. Red Hat

Command understanding the output file destination in case of standard output!!!!!

I ran the following command. cat abc.c > abc.c I got message the following message from command cat: cat: abc.c : input file is same as the output file How the command came to know of the destination file name as the command is sending output to standard file.

LEARN ABOUT POSIX

inet_type

inet_type(4)							   File Formats 						      inet_type(4)

NAME

       inet_type - default Internet protocol type

SYNOPSIS

       /etc/default/inet_type

DESCRIPTION

       The inet_type file defines the default IP protocol to use. Currently this file is only used by the ifconfig(1M) and netstat(1M) commands.

       The  inet_type  file  can  contain  a  number of <variable>=<value> lines. Currently, the only variable defined is DEFAULT_IP, which can be
       assigned a value of IP_VERSION4, IP_VERSION6, or BOTH.

       The output displayed by the ifconfig and netstat commands can be controlled by the value of DEFAULT_IP set in inet_type file.  By  default,
       both commands display the IPv4 and IPv6 information available on the system. The user can choose to suppress display of IPv6 information by
       setting the value of DEFAULT_IP.  The following shows the possible values for DEFAULT_IP and the resulting ifconfig and netstat output that
       will be displayed:

       IP_VERSION4     Displays only IPv4 related information. The output displayed is backward compatible with older versions of the ifconfig(1M)
		       and netstat(1M) commands.

       IP_VERSION6     Displays both IPv4 and IPv6 related information for ifconfig and netstat.

       BOTH	       Displays both IPv4 and IPv6 related information for ifconfig and netstat.

       The command-line options to the ifconfig and netstat commands override the effect of DEFAULT_IP as set in the inet_type file. For  example,
       even if the value of DEFAULT_IP is IP_VERSION4, the command

       example% ifconfig -a6

       will display all IPv6 interfaces.

EXAMPLES

       Example 1: Suppressing IPv6 Related Output

       This is what the inet_type file must contain if you want to suppress IPv6 related output:

       DEFAULT_IP=IP_VERSION4

SEE ALSO

       ifconfig(1M), netstat(1M)

SunOS 5.10							    16 Jun 1999 						      inet_type(4)