All these commands proceeded without error, but there was still no wireless connection after that.
Quote:
For sound, you could try the following in /etc/modprode.d/sound (or whatever filename is appropriate on fedora)
I found a file /etc/modprobe.d/alsa-base and modified it according to your suggestions. In fact it had a single line "options snd-hda-intel enable_msi=1" already in it.
Alas "update-modules" is not available on my system. I investigated and to my current information it is a tool solely used on S390 systems. If it is available on PC systems too where can i download it? Anyway, i rebooted, which should have the same effect but still no luck with the sound.
Quote:
You can run a command line speaker test with
Code:
speaker-test -Dplug:front -c2 -l5 -twav
I ran this command but it hangs indefinitely:
Code:
[root@mysystem ~]# speaker-test -Dplug:front -c2 -l5 -twav
speaker-test 1.0.18
Playback device is plug:front
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
0 - Front Left
Hi,friends!!!
I have a problem with my integrated sound card AC97 on i815 and my version of FreeBSD is 4.5.I know that there is a driver for it called ich.c.gz,but the site containing it is unavaliable now.And is there another driver or some other ideas ?
z-z-z-z-z
:: email removed :: (1 Reply)
Hi All
I am having difficulty configuring sound on my system an wonder if anyone can help me.
xmms refuses to play telling me that
oss_open(): Failed to open audio device (/dev/sound/dsp): No such file or directory
what I have done to try and fix this is
1. create /dev/sound/dsp ... (7 Replies)
Dear all,
I have been using suse linux for as long as I can remember. However, for every installation I get the same problem.
Once the installation is completed, and all of my devices (brand new hardware, from reknown brands) are detected, I decide to start doing some work, and play some... (2 Replies)
I've been using FC2, but my sound card doesn't work
I'm new with linux systems..
but there says that needs to recompile kernel
how can i do it with a kernel 2.6.5 i386 ?
by the way,. my sound card chipset is an ESS 1869F, with a compaq deskpro Smal Form Factor. but i have not found a... (4 Replies)
I am very new at learning Linux/Unix so please bear with me. I am taking a Unix course and I had to install Fedora Core 2 on my laptop PC using Microsoft Virtual PC software. After installing the virtual PC software, I installed the fedora cd's that came with the course. My problem is... (0 Replies)
I've been fighting for a few days now with trying to get my soundcard to recognize. I am currently using a Latitude D630 with Sigmatel C-Major Audio using the Intel ICH8 Family.
My problem appears to be that the computer cannot detect a sound card but it was only able to install default drivers... (0 Replies)
I feel like the true definition of a newb but I guess you gotta start somewhere. I installed Gentoo on my laptop yesterday, it's a gnome based environment and I cannot get any wireless internet. The iwconfig and net-setup commands are not being recognized. I'm not sure what the problem is, I've... (1 Reply)
My sound is messed up. All I get is white noise when I try to watch Youtube or something. I'm running Solaris 10 SPARC on a Sun Ultra 5, which has a built-in speaker. How do I fix it? (4 Replies)
Hi All,
I have dula OS on my system. With Windows and Linux(FC9). On Windows wireless setting works fine with wireless enabled.
Have installed Linux recently. Wireless is enabled, but i am not sure how to configure or make settings.
My laptop is Compaq and OS is FC9.
Please can anybody help... (1 Reply)
I installed F12 around the time it was released and it picked up my wireless card and worked like a charm.....Suddenly last week everything stopped working and I receive what appears to be a driver error when wlan0 tries to load.
Error for wireless request "Set Mode" (8B06) :
SET failed on... (1 Reply)
Discussion started by: woodson2
1 Replies
LEARN ABOUT DEBIAN
rinse
RINSE(8) Perl Programmers Reference Guide RINSE(8)NAME
rinse - RPM Installation Entity.
SYNOPSIS
rinse [options]
Help Options:
--help Show help information.
--manual Read the manual for this script.
--version Show the version information and exit.
Mandatory Options:
--arch Specify the architecture to install.
--directory The directory to install the distribution within.
--distribution The distribution to install.
Customization Options:
--add-pkg-list Additional packages to download and install
--after-post-install Additionally run the specified script after
the post install script.
--before-post-install Additionally run the specified script before
the post install script.
--post-install Run the given post-install script instead of the
default files in /usr/lib/rinse/$distro
Misc Options:
--cache Should we use a local cache? (Default is 1)
--cache-dir Specify the directory we should use for the cache.
--clean-cache Clean our cache of .rpm files.
--config Specify a different configuration file.
(Default is /etc/rinse/rinse.conf)
--pkgs-dir Specify a different directory containing
<distribution>.packages files.
--mirror Specify the URL of the mirror.
(Default is to read it from /etc/rinse/rinse.conf)
--list-distributions Show installable distributions.
--print-uris Only show the RPMs which should be downloaded.
default files in /usr/lib/rinse/$distro
--verbose Enable verbose output.
OPTIONS --arch Specify the architecture to install. Valid choices are 'amd64' and 'i386' only.
--add-pkg-list Add a list of additional packages.
--cache Specify whether to cache packages (1) or not (0).
--cache-dir Specify the directory we should use for the cache.
--clean-cache Remove all cached .rpm files.
--directory Specify the directory into which the distribution should be installed.
--distribution Specify the distribution to be installed.
--help Show help information.
--mirror Specify the URL of the mirror. Normally this is read from /etc/rinse/rinse.conf.
--list-distributions Show the distributions which are installable.
--manual Read the manual for this script.
--print-uris Only show the files we would download, don't actually do so.
--verbose Enable verbose output.
--version Show the version number and exit.
DESCRIPTION
rinse is a simple script which is designed to be able to install
a minimal working installation of an RPM-based distribution into
a directory.
The tool is analogous to the standard Debian GNU/Linux debootstrap
utility.
USAGE
To use this script you will need to be root. This is required
to mount /proc, run chroot, and more.
Basic usage is as simple as:
rinse --distribution fedora-core-6 --directory /tmp/test
This will download the required RPM files and unpack them into
a minimal installation of Fedora Core 6.
To see which RPM files would be downloaded, without actually
performing an installation or downloading anything, then you
may run the following:
rinse --distribution fedora-core-6 --print-uris
TODO
Short of supporting more distributions or architectures there aren't
really any outstanding issues.
AUTHOR
Steve
--
http://www.steve.org.uk/
LICENSE
Copyright (c) 2007-2010 by Steve Kemp. All rights reserved.
Copyright (c) 2011-2013 by Thomas Lange.
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself. The LICENSE file contains the
full text of the license.
2.0.1 2013-01-28 RINSE(8)