12-31-2008
problem while booting from hdd
hello gurus,
i have just installed the os on hdd,
when i write down boot command on ok prompt,
I get following error continuously.
what could be the possible problem
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
auto request sense failed (reason=reset)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
auto request sense failed (reason=reset)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
auto request sense failed (reason=reset)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
auto request sense failed (reason=reset)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
auto request sense failed (reason=reset)
regards
Sameer
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi!
I installed Slackware on my computer so I thought I could have dual booting with ME, but that didn't work. So I installed another bootmanager that I find on internet. When I startup my computer the second bootmangaer that I did find on internet lets me choose system. When I have choosen... (3 Replies)
Discussion started by: Mr.Rudiment
3 Replies
2. UNIX for Advanced & Expert Users
Hai
I have installed win 98 o.s in my system after that i have
installed Red Hat Linux 7.0,there is a problem in dual
booting,by default win98 is being booted, when i insert
bootable linux floppy linux is loaded
My doubt how to overwrite windows MBR and palce the
lilo in MBR.so that it... (2 Replies)
Discussion started by: rajashekaran
2 Replies
3. HP-UX
Hi,
My HP-UX has some errors to wake up and one of them are:
/dev/vg00/rlvol4 BAD CYLINDER GROUPS
I have thought that my hdd has physical problems, my question is:
Exists a program to check the hdd physically and to repair it...
Thanks.... (0 Replies)
Discussion started by: efrenba
0 Replies
4. Solaris
I have another Hdd problem with Ultra 1 machine
the hdd is segate (+-)17560 MB and when I start installtion of sun solaries 2.6 the system sees the hdd correctly, and the installtion goes fine with partioning the disk as follows
/ 150 MB
swap 500 MB
/user 1000 MB
/user1 100MB
/usr3 5500 MB... (4 Replies)
Discussion started by: adol3
4 Replies
5. UNIX for Dummies Questions & Answers
I have seagate USB 2.0 HDD which was working good on my windows system
Recently I have started using red hat Linux 2.6.9-55.0.12.EL (i686 i686 i386 GNU/Linux)
The USB is not at all detected in Linux even if I reboot with it attached to the PC. The same can be detected on any Windows system.
... (0 Replies)
Discussion started by: mahendrakamath
0 Replies
6. Filesystems, Disks and Memory
Hi there,
Here I have an old HP LC3 server from a client of ours.
The server was running in Raid1 Mirror mode.
Yesterday the server didn't boot anymore and now
I have concluded that 1 drive is damaged.
I pulled it out so it can boot from the "good" one.
Unfortuanally this didn't work.
I... (3 Replies)
Discussion started by: severt
3 Replies
7. UNIX for Dummies Questions & Answers
Dear List,
While I was adding second hard disk to my system, I changed the /etc/fstab file by adding the following line:
/mnt/sdb1 /dev/sdb1 ext3 default 2 1
Now system does not boot and gives the following error:
Checking filesystems
/: Clean, 309260/18495840 files, 1064776/18486790... (2 Replies)
Discussion started by: siavoush
2 Replies
8. BSD
Hi,
I have a crappy hard disk and am trying to back up stuff from it onto my newer hopefully less crappy disk. There are dead sectors on the disk and some files can't be read (at all) so OpenBSD downgrades the transfer mode down until PIO mode 4. I noticed the transfer speed slowing down... (0 Replies)
Discussion started by: fiori_musicali
0 Replies
9. AIX
Hi Folks,
I am facing an issue with the performance.
P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes
P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and... (7 Replies)
Discussion started by: filosophizer
7 Replies
10. AIX
Dears,
I have a problem when i reboot the machine last time "AIX 5.3", that after rebooting it not login to graphical desktop, it just stop at console login command line.
Kindly find the attached screenshot.
Anyway to let it login automatically to Desktop?
Would appreciate any pointers to... (1 Reply)
Discussion started by: moudmm
1 Replies
LEARN ABOUT DEBIAN
mhddfs
mhddfs(1) General Commands Manual mhddfs(1)
NAME
mhddfs - The driver combines a several mount points into the single one.
SYNOPSIS
mhddfs /dir1,/dir2[,/path/to/dir3] /path/to/mount [-o options]
mhddfs /dir1 dir2,dir3 /mount/point [-o options]
...
fusermount -u /path/to/mount
fstab record example:
mhddfs#/path/to/dir1,/path/to/dir2 /mnt/point fuse defaults 0 0
mhddfs#/dir1,/dir2,/dir3 /mnt fuse logfile=/var/log/mhddfs.log 0 0
OPTIONS
with an -o option1,option2... you can specify some additional options:
logfile=/path/to/file.log
specify a file that will contain debug information.
loglevel=x
0 - debug messages
1 - info messages
2 - standard (default) messages
mlimit=size[m|k|g]
a free space size threshold If a drive has the free space less than the threshold specifed then another drive will be choosen while creat-
ing a new file. If all the drives have free space less than the threshold specified then a drive containing most free space will be
choosen.
Default value is 4G, minimum value is 100M.
This option accepts suffixes:
[mM] - megabytes
[gG] - gigabytes
[kK] - kilobytes
For an information about the additional options see output of:
mhddfs -h
DESCRIPTION
The file system allows to unite a several mount points (or directories) to the single one. So a one big filesystem is simulated and this
makes it possible to combine a several hard drives or network file systems. This system is like unionfs but it can choose a drive with the
most of free space, and move the data between drives transparently for the applications.
While writing files they are written to a 1st hdd until the hdd has the free space (see mlimit option), then they are written on a 2nd hdd,
then to 3rd etc.
df will show a total statistics of all filesystems like there is a big one hdd.
If an overflow arises while writing to the hdd1 then a file content already written will be transferred to a hdd containing enough of free
space for a file. The transferring is processed on-the-fly, fully transparent for the application that is writing. So this behaviour simu-
lates a big file system.
WARNINGS
The filesystems are combined must provide a possibility to get their parameters correctly (e.g. size of free space). Otherwise the writing
failure can occur (but data consistency will be ok anyway). For example it is a bad idea to combine a several sshfs systems together.
Please read FUSE documentation for a further conception.
COPYRIGHT
Distributed under GPLv3
Copyright (C) 2008 Dmitry E. Oboukhov <dimka@avanto.org>
February 2008 mhddfs(1)