does any one have any ideas how i would go about calculating the number of days left in the month from a bash script ?. I want to do some operations on a csv file according to the result (8 Replies)
Hi folks,
Here i have written a shell script to calculate a maximum number from 10 numbers entered on command line.
max=0
echo Enter 10 numbers , one at a time
for i in 1 2 3 4 5 6 7 8 9 10
do
read n
max=`expr $max + $n`
if --- At this last step there is some problem, it gives error... (5 Replies)
Hi All,
I have an issue with calculating the network number that needs to be put in /etc/netmasks file in my Sol-9 server.
The IP of my server in 10.164.114.135
Default Gateway - 10.164.114.130
Netmask - 255.255.255.240
If I set "10.164.114.130 255.255.255.240" in netmask file, after... (2 Replies)
Hi,
plz see the below code.
here my aim is to calculate the number of lines in unprocessedData.out
if this file contains 40 lines then lastly $linenum should print 40.(except blank lines)
i have tried below code but it giving me the output only one. can anyone help me how to do ?
... (9 Replies)
I wrote the day calculator also in bash. I would like to now, that is it good so?
#!/bin/bash
datum1=`date -d "1991/1/1" "+%s"`
datum2=`date "+%s"`
diff=$(($datum2-$datum1))
days=$(($diff/(60*60*24)))
echo $days
Thanks in advance for your help! (3 Replies)
Hi,
Please help me to find how to calculate the number of TPS supported by any solaris server for example one server with below configuration .
Sun Blade X6270 with two 4-core processors
2 x 300 GB internal disk drives (2 Replies)
Hi,
I want to get total number of cores on my all non-global zones on Solaris 10. I got two methods and both are giving different results. Below link is a script, which tells me that total cores are 8
Mandalika's scratchpad: Oracle Solaris: Show Me the CPU, vCPU, Core Counts and the... (4 Replies)
Discussion started by: ron323232
4 Replies
LEARN ABOUT DEBIAN
printna
MESSAGES(3) libbash messages Library Manual MESSAGES(3)NAME
messages -- libbash library that implements a set of functions to print standard status messages
SYNOPSIS
printOK [indent]
printFAIL [indent]
printNA [indent]
printATTN [indent]
printWAIT [indent]
DESCRIPTION
General
messages is a collection of functions to print standard status messages - those [ OK ] and [FAIL] messages you see during Linux boot process.
The function list:
printOK Prints a standard [ OK ] message (green)
printFAIL Prints a standard [FAIL] message (red)
printNA Prints a standard [ N/A] message (yellow)
printATTN Prints a standard [ATTN] message (yellow)
printWAIT Prints a standard [WAIT] message (yellow)
Detailed interface description follows.
indent
Column to move to before printing.
Default indent is calculated as TTY_WIDTH-10. If current tty width can not be determined (for example, in case of serial console), it
defaults to 80, so default indent is 80-10=10
FUNCTIONS DESCRIPTIONS
printOK [indent]
Prints a standard [ OK ] message (green)
printFAIL [indent]
Prints a standard [FAIL] message (red)
printNA [indent]
Prints a standard [ N/A] message (yellow)
printATTN [indent]
Prints a standard [ATTN] message (yellow)
printWAIT [indent]
Prints a standard [WAIT] message (yellow)
EXAMPLES
Run a program named MyProg, and report it's success or failure:
echo -n 'Running MyProg...'
printWAIT
if MyProg ; then
printOK
else
printFAIL
fi
AUTHORS
Hai Zaar <haizaar@haizaar.com>
Gil Ran <gil@ran4.net>
SEE ALSO ldbash(1), libbash(1)Linux Epoch Linux