12-30-2008
Thanks Dear,
output from format
Quote:
AVILABLE DISK SELECTION
0. c0t0d0 <WDC WD800BB-00JHC0 cyl 38307 alt 2 hd 16 sec 255> /pci@1f,0/pci@1,1/ide@3dad@0,0
1. c0t2d0 < DEFAULT cyl 65533 alt 2 hd 16 sec 255> /pci@1f,0/pci@1,1/ide@3dad@2,0
specify disk ( enter its number ):
and listing of /dev/rdsk/ is like below where in i have just take 1st slice all the listed disk
Quote:
lrwxrwxrwx 1 root root 50 Sep 23 00:15 c0t0d0s0 -> ../../devices/pci@1f,0/pci@1,1/ide@3/dad@0,0:a, raw
lrwxrwxrwx 1 root root 50 Sep 23 00:15 c0t1d0s0 -> ../../devices/pci@1f,0/pci@1,1/ide@3/sd@1,0:a, raw
lrwxrwxrwx 1 root root 50 Sep 23 00:15 c0t2d0s0 -> ../../devices/pci@1f,0/pci@1,1/ide@3/dad@2,0:a, raw
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Could some one please tell the command used to boot from an external SCSI cdrom drive? from PROM level. (2 Replies)
Discussion started by: fishman2001
2 Replies
2. UNIX for Dummies Questions & Answers
I'm running a Ultra 60 and having problems booting from the cdrom. This is the error I get,
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
The file just loaded does not appear to be executable.
Any know what could be the problem here? I've even tried connecting a 2nd cdrom... (3 Replies)
Discussion started by: merlin
3 Replies
3. UNIX for Dummies Questions & Answers
Hi Everyone,
I have a problem. I'm trying too reinstall sun solaris 8.0 on may Sunfire 280r but solaris 9.0 is all ready installed. I tried to boot from cd rom it keeps telling me that File does not seem executable. I need to get Solaris 8.0 on this system. I have boot all ready in single mode... (4 Replies)
Discussion started by: Peterh
4 Replies
4. Solaris
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies
5. Solaris
I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6
I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:... (11 Replies)
Discussion started by: Msororaji
11 Replies
6. Solaris
i am having a problem when trying to boot from cdrom. I received the below message
system is not bootable, boot command is disabledfound
how can i fix this.
also what is the key combination on ordinary keyboard for STOP+A. Is it ctrl+break? (2 Replies)
Discussion started by: shabu
2 Replies
7. Solaris
iam traying to install o/s in spark machine it showing error
ok >boot cdrom
is showing error
short disk read
failed to read superblock
the file just loaded does not appear to excutable
how to solve this can u help me (6 Replies)
Discussion started by: tirupathi
6 Replies
8. Solaris
Hi community,
Does anyone can tell me the difference between "boot cdrom" and "boot cdrom - install" ?
Thank you very much:D (3 Replies)
Discussion started by: Sunb3
3 Replies
9. Hardware
I have a server with a scsi raid controller (for hard drives) and a scsi controller (for tape drive and cd-rom). I am trying to boot from the cd-rom but can't. During boot up, bootable media is detected in the cd-rom but the system will not boot from it. BIOS for the raid controller installs but... (1 Reply)
Discussion started by: powwm
1 Replies
10. UNIX for Beginners Questions & Answers
Good Afternoon,
I'm trying to boot from cdrom so I:
bash-2.05# init 0
{1} ok boot cdrom -s and I get:
Rebooting with command: boot cdrom -s
Boot Device: /pci@1e,600000/ide@d/cdrom@2,0:f File and args: -s
Can't read disk label.
Can't open disk label package
Evaluating:
Can't open boot... (13 Replies)
Discussion started by: Stellaman1977
13 Replies
LEARN ABOUT DEBIAN
dtc_write_xenhvm_conf
dtc_write_xenhvm_conf(8) System Manager's Manual dtc_write_xenhvm_conf(8)
NAME
dtc_write_xenhvm_conf - rewrites the xen startup script with selected params
SYNOPSIS
dtc_write_xenhvm_conf VPS_NUMBER MEMORY_SIZE ALL_IP_ADDRESSES VNC_CONSOLE_PASSWORD HOW_TO_BOOT
DESCRIPTION
dtc_write_xenhvm_conf This shell script is a part of the dtc-xen package that is to be used by the dtc panel to manage a Xen VPS server.
This script generate a Xen startup file with the parameters given to the script.
PARAMETERS
Note that ALL parameters are mendatory.
VPS_NUMBER has to be a number between 01 and 29
MEMORY_SIZE is the amount of memory in mega bytes that you want to have setup in the Xen startup file for this VPS
ALL_IP_ADDRESSES is a list of IPs that you want to be set in the VM's startup file and in the VM's configuration. Note that the IPs have to
be separated by spaces, and thus you might want to use single quotes like this: '1.2.3.4 1.2.3.5'. Note that only the first IP will be set
in the VM's configuration, but the list will be set in the Xen startup file so you can use the anti-spoofing facilities of Xen if you need
it (with untrusted users / unknown customers for example).
VNC_CONSOLE_PASSWORD This is the VNC console password that you want to have set-up in the Xen domU configuration file, so that you can con-
nect using VNC to the the setup. Note that special value no_vnc can be used to declare that you do not want the VNC console to be used at
all.
HOW_TO_BOOT This controls what the VPS will use to boot. A special value of hdd can be used to tell dtc_write_xenhvm_conf that you want to
boot on the hard drive of the domU. Any other parameters will be used as a .iso file located in /var/lib/dtc-xen/ttyssh_home/xenXX where
xenXX equals to the VPS number set in the VPS_NUMBER parameter (see above).
Note that whatever is set in this parameter, dtc_write_xenhvm_conf will add as many cdrom devices as it finds .iso files in the
/var/lib/dtc-xen/ttyssh_home/xenXX folder.
EXAMPLE
The following command:
dtc_write_xenhvm_conf 14 512 '1.2.3.4 1.2.3.5' mYvNcPaSs boot.iso
will produce this config file in /etc/xen/xen14:
kernel = "/usr/lib/xen/boot/hvmloader"
builder = 'hvm'
memory = 512
name = "xen14${VPSNAME}"
vcpus=1
pae=0
acpi=0
apic=0
vif = [ 'type=ioemu, mac=00:00:00:00:00:00, ip=1.2.3.4 1.2.3.5' ]
disk=[ 'phy:/dev/mapper/lvm1-xen14,ioemu:hda,w', 'file:/var/lib/dtc-xen/ttyssh_home/xen14/boot.iso,hdb:cdrom,r', 'file:/var/lib/dtc-
xen/ttyssh_home/xen14/cd2.iso,hdc:cdrom,r' ]
cdrom="/var/lib/dtc-xen/ttyssh_home/xen14/boot.iso"
boot="d"
vfb = [ "type=vnc,vncdisplay=21,vncpasswd=mYvNcPaSs" ]
nographic=0
vnc=1
stdvga=1
serial='pty'
Note that the above mac address will be calculated and depend on your node name: it will NOT be like the above example.
UPDATES
See http://www.gplhost.com/software-dtc-xen.html for updates.
dtc_write_xenhvm_conf(8)