No, its not a movie, its a command to get you from the sc> ALOM prompt back to the console or ok prompt.
You must log into the ALOM, then to jump back to the console enter "console -f".
Problem is that this leaves you logged in on the ALOM.
Question: is there an escape key sequence to get... (1 Reply)
Hi Everyone.
What is the differece b/n ALOM and ALOM CMT Service processor.
I am trying reset ALOM login/passwd using scadm utility on T2000, while I am googling I came cross ALOM CMT doesnt support scadm utility, but ALOM supports.
Not sure how different are these.
Thanks, (0 Replies)
We have a production server at a client site running AIX. And recently when users are trying to connect to it via telnet, it prompts "No more multiple IP addresses to connect".
Can I know what does this error mean? and how to rectify this?
Thanks. (2 Replies)
I have bought from eBay a second hand Sun Fire V210 server and I'm really stumped at the lack of complete instructions on how to connect to it.
I don't have a Windows machine, I've only got Ubuntu and OS X computers. None of them have an old RS-232 port on them either.
In saying that, I have... (12 Replies)
Hello forum,
I have a SUN v250 at home that I have to practice Solaris. I currently have Solaris 9 installed and the ALOM Sun(tm) Advanced Lights Out Manager 1.5.2.
From the ALOM I want to access the console.
sc> console -f
Enter #. to return to ALOM.
after that there is no response.... (19 Replies)
It appears i cant connect linux VPS server via SSH or i cant SCP any file to it and i cant wget any file TO it (from inside it) while CSF (Config Server Firewall, LFD is running. Just after isntall in default configuration and after changing TESTING mode to LIVE mode.
Trying to wget & install... (1 Reply)
Hi,
How to set ip address on eth0 for access ssh from ALOM? Is it possible? Now i cannot access it because don't have VGA.
I keep try to access using ssh. Please guide me.
Thanks. (16 Replies)
Hi all,
I have some problems with the fan FT0.F0, which looks like has a problem with the PROM/ALOM ( I am nor sure who).....but, in fact, the fan is working properly even in other V440 Sparc Server.
We checked HW comunication between Fan and the MotherBoard, and we think is a problem of... (8 Replies)
Greetings Experts,
I am working for a bank client and have a question on connect-direct and SFTP.
We are using Linux RedHat servers. We use connect-direct to transfer (NDM) files from one server to another server. At times, we manually transfer the files using SFTP from one server to another... (2 Replies)
Discussion started by: chill3chee
2 Replies
LEARN ABOUT DEBIAN
xe
XE(4) BSD Kernel Interfaces Manual XE(4)NAME
xe -- Xircom PCMCIA Ethernet device driver
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device xe
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_xe_load="YES"
DESCRIPTION
The xe driver supports PCMCIA Ethernet adapters based on Xircom CE2- and CE3-class hardware. This includes devices made by Xircom along with
various OEM manufacturers.
Please note that the xe driver only supports PCMCIA cards and their Ethernet functions. xe does not support the on-board modem device
located on some version of the Ethernet/modem combo cards. In particular, Xircom RealPort2 cards are not supported by this driver.
The xe driver supports the following media types:
autoselect Enable autoselection of media type and options.
10Base2/BNC
Select 10Mbps operation on a BNC coaxial connector.
10BaseT/UTP
Select 10Mbps operation on a RJ-45 connector.
100BaseTX Select 100Mbps operation.
Note that 100BaseTX operation is not available on CE2-class cards, while the 10Base2/BNC mode is only available on CE2-class cards. Full-
duplex operation is currently not supported. For more information on configuring network interface devices, see ifconfig(8).
HARDWARE
The xe driver supports the following cards:
o Xircom CreditCard Ethernet (PS-CE2-10)
o Xircom CreditCard Ethernet + Modem 28 (PS-CEM-28)
o Xircom CreditCard Ethernet + Modem 33 (CEM33)
o Xircom CreditCard 10/100 (CE3, CE3B)
o Xircom CreditCard Ethernet 10/100 + Modem 56 (CEM56)
o Xircom RealPort Ethernet 10 (RE10)
o Xircom RealPort Ethernet 10/100 (RE100)
o Xircom RealPort Ethernet 10/100 + Modem 56 (REM56, REM56G)
o Accton Fast EtherCard-16 (EN2226)
o Compaq Microcom CPQ550 Ethernet/Modem PC Card
o Compaq Netelligent 10/100 PC Card (CPQ-10/100)
o Intel EtherExpress Pro/100 PC Card Mobile Adapter 16 (Pro/100 M16A)
o Intel EtherExpress Pro/100 LAN/Modem PC Card Adapter (Pro/100 M16B)
Other similar devices using the same hardware may also be supported.
DIAGNOSTICS
xe%d: Cannot allocate ioport
xe%d: Cannot allocate irq A fatal initialization error occurred while attempting to allocate system resources for the card.
xe%d: Unable to fix your %s combo card A fatal initialization error occurred while attempting to attach an Ethernet/modem combo card.
xe%d: watchdog timeout: resetting card The card failed to generate an interrupt acknowledging a transmitted packet. May indicate a PCMCIA
configuration problem.
xe%d: no carrier The card has lost all contact with the network; this usually indicates a cable problem.
SEE ALSO pccard(4), ifconfig(8)HISTORY
The xe driver first appeared in FreeBSD 3.3.
AUTHORS
The xe device driver was written by Scott Mitchell <rsm@FreeBSD.org>. This manual page was written by Scott Mitchell <rsm@FreeBSD.org>, and
Tom Rhodes <trhodes@FreeBSD.org>.
BUGS
Supported devices will fail to attach on some machines using the NEWCARD PC Card framework.
Automatic media selection is usually unreliable.
BSD July 16, 2005 BSD