problem after adding new ide disk Post: 302271822

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

adding disk to ultra10

I enquired before about adding another disk to an ultra 10... and was told it was possible... Well - since then I got my hands on another ultra 10 - and have taken the disk out of that one... I should be able to connect it up - but I am wondering - should this be mounted in any partiulcar...

2. Solaris

adding new disk to cluster

Dear all , I am new to sun cluster and i having a problem adding a disk to a disk group . My platfrom consists of a clustered E6900 SUN server and an EMC DX1000 storage . the disk group that iam trying to add the disk to is shared group , whwen i run vxdisk list i get in status "online...

3. AIX

IDE DISK ERR2 and LVM SA STALEPP errors in errpt

Hi, I'm getting the errors below in the errpt report for a IBM Blade server. I'm guessing there's a problem with one of the disks but don't know how I can confirm this. Can anyone offer any suggestions? Regards Gareth

4. HP-UX

disk adding through lvm

Hi dear(s) Can u explain how to add a disk through lvm with commands. I need to add a 9 gb scsi HS disk to a Hp D class 9000 server.

5. Filesystems, Disks and Memory

shift hard disk from primary IDE channel to secondary IDE channal

Wellcomes All, some times ago I 've installed a Debian ditribution on an Hard Disk who was set as Primary Master. Few days ago, I 've decided to install another Hard Disk with a different Operating System. When I did that, I turned off the old hard disk, and I mouted the new one on the Primary IDE...

6. Filesystems, Disks and Memory

Wrong BIOS IDE Settings on a SATA disk (AHCI)?

Hello, I wanted to share an experience I had today which was quite a learning experience and perhaps useful for others who may run into the issue at some point in the future. Basically, the scenario involves a OS which was installed on a machine which hardware-wise, had a SATA Drive. The...

7. UNIX Desktop Questions & Answers

Maximize IDE Hard Disk

Hi there! I am installing Unixware 7.1 to a new server. We usually use SCSI hard for this but since this will be used only for testing, I decided to use an 80GB IDE hard disk. I was able to successfully load the unix but found out that the 80GB hard disk was not maximized. The total hard disk...

8. Filesystems, Disks and Memory

Adding a disk

Recently added a disk to a clariion array system, binded it as a raid 5, now I have no clue how to see it in dg-unix. I want to add it to a current filesystem, and now i'm down river without a paddle.

9. SCO

declare disk driver for IDE hard disk

hi I've a fresh installation of SCO 5.0.7 on the IDE hard disk. For SCSI hard disk I can declare, for example blc disk driver using: # mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk?

10. AIX

Adding New Hard Disk

Hi, On P5 I would like to add hard drive, currently 2 hard disk are already exists, would like to add one more, 2 Slots are emtpy, I would like to know how to find out wheather adapter is attached to that 2 free slot using command.

LEARN ABOUT MINIX

installboot

installboot(1M)                                                                                                                    installboot(1M)

NAME

       installboot - install bootblocks in a disk partition

SYNOPSIS

       installboot bootblk raw-disk-device

       The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.

       The  ufs  boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
       found using the -i option of uname(1).

       The installboot utility is a SPARC only program. It is not supported on the  architecture.  users should use installgrub(1M) instead.

       bootblk         The name of the bootblock code.

       raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is  read-
                       able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.

       Example 1: Installing UFS Boot Block

       To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:

              example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk 
                   /dev/rdsk/c1t0d0s0

       /usr/platform/platform-name/lib/fs/ufs

           directory where ufs boot objects reside.

       /platform/platform-name/ufsboot

           second level program to boot from a disk or CD

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE         |      ATTRIBUTE VALUE        |
       +-----------------------------+-----------------------------+
       |Availability                 |SUNWcsu                      |
       +-----------------------------+-----------------------------+

       od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)

WARNINGS

       The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.

                                                                    11 Apr 2005                                                    installboot(1M)

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

adding disk to ultra10

Discussion started by: frustrated1

2. Solaris

adding new disk to cluster

Discussion started by: ppass

3. AIX

IDE DISK ERR2 and LVM SA STALEPP errors in errpt

Discussion started by: m223464

4. HP-UX

disk adding through lvm

Discussion started by: sreekumar.R