12-28-2008
Thanks Duke,
No its not working even after removing the new disk. Later i tried booting the system from cdrom however no luck.
Then i tried execute following
# reset-all
#probe-scsi-all
< nothing as output>
# probe-ide
nothing comes up in either or primary or secondary
Later i removed the old disk and tried with new disk and run the command probe-scsi and it identified new disk and cd
i do not have have OS one the new disk
please help
Last edited by kumarmani; 12-28-2008 at 11:33 AM..
10 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
I enquired before about adding another disk to an ultra 10...
and was told it was possible...
Well - since then I got my hands on another ultra 10 - and have taken the disk out of that one...
I should be able to connect it up - but I am wondering - should this be mounted in any partiulcar... (2 Replies)
Discussion started by: frustrated1
2 Replies
2. Solaris
Dear all ,
I am new to sun cluster and i having a problem adding a disk to a disk group .
My platfrom consists of a clustered E6900 SUN server and an EMC DX1000 storage .
the disk group that iam trying to add the disk to is shared group ,
whwen i run vxdisk list i get in status "online... (2 Replies)
Discussion started by: ppass
2 Replies
3. AIX
Hi,
I'm getting the errors below in the errpt report for a IBM Blade server. I'm guessing there's a problem with one of the disks but don't know how I can confirm this. Can anyone offer any suggestions?
Regards
Gareth (4 Replies)
Discussion started by: m223464
4 Replies
4. HP-UX
Hi dear(s)
Can u explain how to add a disk through lvm with commands.
I need to add a 9 gb scsi HS disk to a Hp D class 9000 server. (2 Replies)
Discussion started by: sreekumar.R
2 Replies
5. Filesystems, Disks and Memory
Wellcomes All,
some times ago I 've installed a Debian ditribution on an Hard Disk who was set as Primary Master. Few days ago, I 've decided to install another Hard Disk with a different Operating System. When I did that, I turned off the old hard disk, and I mouted the new one on the Primary IDE... (1 Reply)
Discussion started by: thekarsillo
1 Replies
6. Filesystems, Disks and Memory
Hello,
I wanted to share an experience I had today which was quite a learning experience and perhaps useful for others who may run into the issue at some point in the future.
Basically, the scenario involves a OS which was installed on a machine which hardware-wise, had a SATA Drive. The... (0 Replies)
Discussion started by: septima.pars
0 Replies
7. UNIX Desktop Questions & Answers
Hi there! I am installing Unixware 7.1 to a new server. We usually use SCSI hard for this but since this will be used only for testing, I decided to use an 80GB IDE hard disk. I was able to successfully load the unix but found out that the 80GB hard disk was not maximized. The total hard disk... (1 Reply)
Discussion started by: limpinmd
1 Replies
8. Filesystems, Disks and Memory
Recently added a disk to a clariion array system, binded it as a raid 5, now I have no clue how to see it in dg-unix. I want to add it to a current filesystem, and now i'm down river without a paddle. (0 Replies)
Discussion started by: danceofillusion
0 Replies
9. SCO
hi
I've a fresh installation of SCO 5.0.7 on the IDE hard disk.
For SCSI hard disk I can declare, for example blc disk driver using:
# mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk? (3 Replies)
Discussion started by: ccc
3 Replies
10. AIX
Hi,
On P5 I would like to add hard drive, currently 2 hard disk are already exists, would like to add one more,
2 Slots are emtpy, I would like to know how to find out wheather adapter is attached to that 2 free slot using command. (7 Replies)
Discussion started by: manoj.solaris
7 Replies
LEARN ABOUT SUNOS
installboot
installboot(1M) installboot(1M)
NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)
WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)