Redirect an application with a Serial connection Post: 302270747

8 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

redirect connection

I have two UX servers ( eg. Server A , Server B ) , the users use Netterm as emulator to telnet to connect to these servers , each server have assigned a dedicated IP address ( eg. Server A --> 192.168.1.1 , Server B --> 192.168.1.2 ) , now if a user want to connect Server A , he need to telnet to...

2. UNIX for Dummies Questions & Answers

hp-ux serial connection question

Hi, I need to connect from an hp-ux box to a device that only have a serial port. When I need to do that from solaris to that device I used put a null modem and type tip hardwire, but I'm new with hp-ux and I don't have the tip command. Any idea? Thanks.

3. IP Networking

ip communication through serial connection

I have serial modem connection between two computers. We have to login the remote computer through ip address. How can I get the ip address in this connection?

4. Solaris

USB to Serial Adapter connection

Hi Community, I'm working on Sun Server V490 with my PC (with OS Vista). I'm using a USB to Serial Adapter to connect to Server directly. I've this problem, I'm connecting to Server with Putty client with this settings: boud rate 9600, 8 bit, 0 parity, 0 flow control, but after to have typed...

5. AIX

serial modem connection

I configured the serial modem in my P6-550 AIX 5.3 box But i dont have telephone line. when I run the command # cu -l /dev/tty1 the output is as follows does it mean that my modem is responding to the command? can i say my serial port is working and communicating fine? Connected ...

6. UNIX for Dummies Questions & Answers

Serial Connection sun blade 100 to pc

Hi, If someone please help as my efforts been exhausted in connecting my sun blade 100 serial to my pc. I am using null modem with DB9(female) in sun blade and DB9(female, using gender change) in pc. I am trying both hyper/putty 9600 8 N 1 configurations. Thanks

7. Ubuntu

Ubuntu 9.04 Serial application to telnet to serial device

Hello! I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a...

8. Solaris

Putty Serial Connection problems

Hi forums, I was wondering if any of you have faced this problem that I have been having for quite some time now regarding serial connection with putty to my Solaris Box Sunfire v250 and Sun v220 and sun v440. The serial connection freezes on my Windows 7 64 and 32 Bit machines. I unplug and...

LEARN ABOUT OSF1

iscc

iscc(7) 						 Miscellaneous Information Manual						   iscc(7)

NAME

       iscc - serial communications interface

SYNOPSIS

       controller  iscc0  at  isa0

DESCRIPTION

       An  onboard  Zilog  8530  DUART	provides  AXPvme-based Single Board Computers with console (CON) and auxiliary (AUX) serial communications
       ports.  Both serial communications ports can operate at baud rates from B50 to B38400,  excluding B134 (see tty(7)).

       On AXPvme Single Board Computers configured with a graphics head as the system console, the CON serial communications port (/dev/tty01)	is
       available for use by application programs as an additional communications port.

       In  the	absence  of a graphics head, the CON serial communications port (/dev/console) becomes the system console. When used as the serial
       system console, the CON serial communications port always operates at 9600 BPS, 8-bits, and no parity.

       Regardless of system console, the AUX serial communications port (/dev/tty00) is always available for use by application programs.

RESTRICTIONS

       Data communications equipment attached to the CON serial communications port must be set to 9600 BPS, 8-bits, no parity when configured	as
       the serial system console. The iscc terminal driver enforces this restriction.

       No modem control is supported for either the CON or AUX serial communications ports.

FILES

       console terminal local terminal local terminal

RELATED INFORMATION

       console(7), devio(7), tty(7), MAKEDEV(8) delim off

																	   iscc(7)