ssh very slow Post: 302270731

10 More Discussions You Might Find Interesting

1. BSD

ipfw slow ssh and ftp connections

just as the title says. thanks. #General Rule Sets /sbin/ipfw add 0300 check-state /sbin/ipfw add 0301 deny tcp from any to any in established /sbin/ipfw add 0302 pass tcp from any to any out setup keep-state /sbin/ipfw add 0303 pass udp from any to any out #SSH FTP /sbin/ipfw add 0400...

2. Solaris

Solaris 9 slow login thru ssh & ftp

When I ssh to my box, an Ultra 5. I get prompted for password immediately. I enter it and have to wait sometimes a full minute for it to prompt for a password. The same thing happens when i try to ftp to the box, it will say connected, but it takes forever to prompt for password, and...

3. UNIX for Dummies Questions & Answers

SSH and FTP connect slow

Hi again guys, Earlier today, just all of a sudden, all SSH and FTP connections to my internal Linux box just slowed down to a crawl. After the connection/authentication though, everything was back to normal speed. Until you have to connect again. A box reboot didnt work either. Now, from...

4. Solaris

Slow login via SSH

Hi Guys and Girls, I know this is a common question but I've searched and we've tried the suggestions without luck. When I log into the box via SSH from a windows machine I get a 1 min 20 sec delay. If we add my IP address and machine name to /etc/hosts then I get an instant login. I would be happy...

5. Shell Programming and Scripting

Net::SSH::Perl slow to login.

I have some sample code that's supposed to ssh to another machine using Net::SSH::Perl, execute a command, and print the output of that command. It's very basic, and it works. However, I noticed that upon logging in: $ssh->login('username','password'); It takes roughly 10-13 seconds to...

6. Solaris

Slow ssh connection after patching

I have Solaris-10 server which was patched by patch cluster last weekend. After patching, it connects slow with other server. Meaning, when I do - ssh server2 OR ssh wluser2@server2 OR ssh root@server2 It waits for 9-10 seconds and then prompt for password, while it used to be instant...

7. Solaris

Open Indiana 151a - Slow SSH Login

Hi, I have the following issue, when I tried to login to an Openindiana remote server through ssh It takes to long to ask me for the password. So i tried -v and I realize that sshd hangs here " debug1: SSH2_MSG_SERVICE_ACCEPT received " for at least 2 minutes. Then I can log in and everything is...

8. HP-UX

SSH slow at connect

Hi experts, We are getting slow ssh session connections at HP-UX 11.31 servers. We have set the parameters that maybe will affect , and commented at other theads at config file sshd_config : UseDNS no X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost no GSSAPIAuthentication no. ...

9. SuSE

SLES 11.2 slow SSH password prompt

We are having an issue with slow password prompts via SSH login on all of our SLES 11.2 boxes. The output from a ssh -v login attempt shows a delay here: debug1: SSH2_MSG_SERVICE_ACCEPT receivedThis issue only happens on the first logon of the day; subsequent logons are normal. Adding the client's...

10. Solaris

Slow ssh on Solaris 10 zone

ssh is slow on solaris zone , and is getting stuck at the following place. debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug3: Wrote 664 bytes for a total of 3325 Below is the ssh version being used: Sun_SSH_1.1.6, SSH protocols 1.5/2.0, OpenSSL 0x0090704f ...

LEARN ABOUT OSX

nns_common

nameserv::common(n)					       Name service facility					       nameserv::common(n)

__________________________________________________________________________________________________________________________________________________

NAME

       nameserv::common - Name service facility, shared definitions

SYNOPSIS

       package require Tcl  8

       package require nameserv::common  ?0.1?

       ::nameserv::common::port

_________________________________________________________________

DESCRIPTION

       Please read Name service facility, introduction first.

       This  package is internal and of no interest to users. It provides the commands of the name service facility which are shared by the client
       and server implemented by the packages nameserv::server and nameserv (the client).

       This service is built in top of and for the package comm.  It has nothing to do with the Internet's Domain Name System. If  the	reader	is
       looking for a package dealing with that please see Tcllib's packages dns and resolv.

API

       The package exports a single command, as specified below:

       ::nameserv::common::port
	      The  result  returned  by  the  command is the id of the default TCP/IP port a nameservice server will listen on, and a name service
	      client will try to connect to.

BUGS, IDEAS, FEEDBACK
       This document, and the package it describes, will undoubtedly contain bugs and other problems.  Please report such in the category nameserv
       of the Tcllib SF Trackers [http://sourceforge.net/tracker/?group_id=12883].  Please also report any ideas for enhancements you may have for
       either package and/or documentation.

SEE ALSO

       nameserv::client(n), nameserv::server(n)

KEYWORDS

       client, name service, server

CATEGORY

       Networking

COPYRIGHT

       Copyright (c) 2007-2008 Andreas Kupries <andreas_kupries@users.sourceforge.net>

nns									0.1						       nameserv::common(n)

10 More Discussions You Might Find Interesting

1. BSD

ipfw slow ssh and ftp connections

Discussion started by: dwildgoose

2. Solaris

Solaris 9 slow login thru ssh & ftp

Discussion started by: BG_JrAdmin

3. UNIX for Dummies Questions & Answers

SSH and FTP connect slow

Discussion started by: Aeros

4. Solaris

Slow login via SSH

Discussion started by: MikeKulls