Sun 6048 Blade Rack Power Reqs. Post: 302270649

9 More Discussions You Might Find Interesting

1. Solaris

sun Blade 2000 and XVR100

hello, I have SunBlade 2000 with XVR-1000 graphics card. Xserver won't loaded. I've reinstalled OS 9 ( loaded Driver) nor 10 still won't do it. Anyone has this problem or have any ideas whats' wrong, greatly appreciated!! thanks in adv.

2. UNIX for Dummies Questions & Answers

Please help to configure Sun Blade 150 workstation

Hi, I am new to UNIX. I have a Sun Blade 150 worksation. I used a Dell monitor and Dell keyboard as input and output devices. However, workstation always told me that keyboard couldn't be found. I used Dell keyboard with USB and Dell keyboard with series connector. It all didn't work. Please help...

3. Solaris

Sun Blade 100 Disk Compatibility

It's me again, I was taking my Sun Blade 100 apart last night to see what kind of drive I have. It is a Seagate ST320011A Barracuda ATA IV 20 GB 7200 RPM Ultra ATA/100 IDE. Now 20 gig ain't all that big anymore and I got to thinking about putting a couple bigger drives in there. although I...

4. Hardware

Sun Blade 1000 keyboard not detected.

Hello, I have a sun blade 1000 machine, it passes post, has 2 750mhz sparc 3 cpus and has 4GB of ram. I have setup a TIP connection and did everything i could to figure what the hell is going on, but I cannot it seems to me that the usb ports are not giving out any power. I've tried all...

5. Solaris

Sun Blade 150 not a Sun?

I have recently re-installed Solaris 10 on a Sun Blade 150 followed by a patch set (10_Recommended) dated 2011.12.05. I have just noticed /bin/sun now returns false, rather than true. See below. $ uname -a SunOS myblade1 5.10 Generic_147440-07 sun4u sparc SUNW,Sun-Blade-100 $ /bin/sparc &&...

6. UNIX for Dummies Questions & Answers

Reinstalling Solaris 9 on Sun Blade 100

For the past ten years I have owned a blade 100, and I had Solaris 9 running on it. Due to the fact, 9 is woefully out of date, I wanted to try 10, but 10 needed more ram, so I beefed up the ram to the full 2 gig. I have two 15 gig ide drives in the box (stock drives). But unfortunately solaris...

7. UNIX for Dummies Questions & Answers

SUN BLADE T6340 - which OS ?

Hi, I have server SUN BLADE T6340 and i tried install debian sparc on this machine. Will it work ? In the specification is written only Solaris 10.

8. Hardware

How to find Power Management Profile on CLI for Blade?

Hi, I have set the power management profile on a Blade to Max Performance. Is there and command I can run to check this when the machine is up and running Thanks

9. Solaris

Execution problems with sun blade 150

hello i have a forte gamma camera Philips device . and its a medical device. this medical device is came with sun blade 150 pc and pegasys is printed on the sun blade pc .the problem is when i switched the power on , the sun blade runs and a white screen appear with the information about the...

LEARN ABOUT CENTOS

ibfindnodesusing

IBFINDNODESUSING(8)						Open IB Diagnostics					       IBFINDNODESUSING(8)

NAME

       IBFINDNODESUSING -

find a list of end nodes which are routed through the specified switch and port
   SYNOPSIS
       ibfindnodesusing.pl [options] <switch_guid|switch_name> <port>

   DESCRIPTION
       ibfindnodesusing.pl uses ibroute and detects the current nodes which are routed through both directions of the link specified.  The link is
       specified by one switch port end; the script finds the remote end automatically.

   OPTIONS
       -h

	      show help

       -R

	      Recalculate the ibnetdiscover information, ie do not use the cached information.	This option is slower but should be  used  if  the
	      diag tools have not been used for some time or if there are other reasons to believe that the fabric has changed.

       -C <ca_name>    use the specified ca_name.

       -P <ca_port>    use the specified ca_port.

   FILES
   CONFIG FILE
       /etc/infiniband-diags/ibdiag.conf

       A global config file is provided to set some of the common options for all tools.  See supplied config file for details.

   NODE NAME MAP FILE FORMAT
       The node name map is used to specify user friendly names for nodes in the output.  GUIDs are used to perform the lookup.

       This functionality is provided by the opensm-libs package.  See opensm(8) for the file location for your installation.

       Generically:

       # comment
       <guid> "<name>"

       Example:

       # IB1
       # Line cards
       0x0008f104003f125c "IB1 (Rack 11 slot 1	 ) ISR9288/ISR9096 Voltaire sLB-24D"
       0x0008f104003f125d "IB1 (Rack 11 slot 1	 ) ISR9288/ISR9096 Voltaire sLB-24D"
       0x0008f104003f10d2 "IB1 (Rack 11 slot 2	 ) ISR9288/ISR9096 Voltaire sLB-24D"
       0x0008f104003f10d3 "IB1 (Rack 11 slot 2	 ) ISR9288/ISR9096 Voltaire sLB-24D"
       0x0008f104003f10bf "IB1 (Rack 11 slot 12  ) ISR9288/ISR9096 Voltaire sLB-24D"

       # Spines
       0x0008f10400400e2d "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
       0x0008f10400400e2e "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
       0x0008f10400400e2f "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
       0x0008f10400400e31 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"
       0x0008f10400400e32 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"

       # GUID	Node Name
       0x0008f10400411a08 "SW1	(Rack  3) ISR9024 Voltaire 9024D"
       0x0008f10400411a28 "SW2	(Rack  3) ISR9024 Voltaire 9024D"
       0x0008f10400411a34 "SW3	(Rack  3) ISR9024 Voltaire 9024D"
       0x0008f104004119d0 "SW4	(Rack  3) ISR9024 Voltaire 9024D"

   AUTHOR
       Ira Weiny
	      < ira.weiny@intel.com >

															       IBFINDNODESUSING(8)