this would be the easiest way to clone them. you won't need to pass the vtoc to the new disk as dd will copy all the 'low-level' formatting of the drive including the bootblk. however, do not connect any network cabling when placing the 2nd drive into the new server. you have ip conflicts and hostname conflicts which could cause problems on your network. once the new disk is installed, you may want to rebuild the /etc/path_to_inst just to be safe. after that, run sys-unconfig to do the hostname and ip stuff.
Hello.
I am asked to build a new UNIX Server for Development environment before we could ask the high level experts to build production environment. Could you please let me know what all must I have to know and the steps inorder to build ux server?
Thank you! (2 Replies)
Hi Guys,
Marry X-MAX in advance :)
I would like to build a new server using ufsdump/ufsrestore. Both the servers are identical hardware and model. I am using Solaris 10 X86 O/S.
I am having ufsdump "mydump.rootdump.gz" in a Central NFS server.
What I did:-
I took backup of root... (1 Reply)
Hi Guys,
Marry X-MAX in advance :)
I would like to build a new server using ufsdump/ufsrestore. Both the servers are identical hardware and model. I am using Solaris 10 X86 O/S.
I am having ufsdump "mydump.rootdump.gz" in a Central NFS server.
What I did:-
I took backup of root... (1 Reply)
Hi All,
I am just starting to build T5240 servers with ldoms in the hope of consolidating some of my older hardware (280Rs, 220Rs, etc).
These old servers are currently set up using disksuite mirroring to backup all root and data drives.
I am new to Ldoms, zpools, zfs, raidctl, et al.
... (2 Replies)
Hello Everyone,
This post is a result of my search and quest to build a Unix Server at Home. I am familiar with the most of the systems such as, Solaris 10, HP-UX & Linux.
Can somebody help me with more information about How to Build a Unix Server right from Fundamentals.... ?
I have... (5 Replies)
I have been given the task of building a video server that has basic video editing capabilities through a web interface. Something like what jaycut.com does. Right now we use FFmpeg on one of our servers to do command line editing and conversion but we want to make it super simple so that normal... (0 Replies)
Hi,
I am fresher in Unix and hence need your help in understanding the basic concepts in Server Building.
Please guide me with the next steps in building our own server after Assembling hardware and installing OS. (1 Reply)
Hello everyone,
I would like to setup a lamp server from a minimal distro and to compile PHP, MySQL and Apache myself.
I have chosen CentOS minimal for the OS and I am trying to build the stack by hand... But well, it appears I need some help!
First: I am looking for good and recent... (3 Replies)
Hello,
I am planning to build a NAS server next week and i was wondering which OS to use.
As i see the two most common are FreeNAS and Ubuntu server + samba.
What do you think?Do you hava any experience on that?Any other idea?
Thanks! (5 Replies)
Discussion started by: @dagio
5 Replies
LEARN ABOUT OSX
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)