I have the primary set up, but cannot get the secondary box to answer a query. Here is the message I get:
> nslookup dfwnet1 10.26.38.41
*** Can't find server name for address 10.26.38.41: Non-existent host/domain
*** Default servers are not available
10.26.38.41 is the IP of the secondary... (3 Replies)
:cool:
I want to use 2 tcp applications in SCO 5.05 senerio I am using
VisionFS 3.1 and I need to set it up as a secondary tcp app. I follow the profeditoir and change the tcp port from the primary port (139) to any other number below port 1024 and then restart the VisionFS server it is still... (2 Replies)
Wellcomes All,
some times ago I 've installed a Debian ditribution on an Hard Disk who was set as Primary Master. Few days ago, I 've decided to install another Hard Disk with a different Operating System. When I did that, I turned off the old hard disk, and I mouted the new one on the Primary IDE... (1 Reply)
This is one our office BOX
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
Kisses% rlogin pebblz01 -l adminID
Password:
Last login: Sat Feb 14 01:11:36 from Kisses
Please enter your own login id and password.
Your login: I_rule
Your password:xxxxx
From the above... (3 Replies)
hosta(eth0)----|switch|---(eth0)hostb
say hosta and hostb both connect to a swtich using eth0 with public IP addresses, and I add secondary and private IP on hosta and hostb's same eth0 interfaces.
So in order for them to reach each other, do I need to config the switch? (3 Replies)
hi guys
I am doing some testing for DNS
I got a master DNS(192.168.2.10) and I setup a slave DNS(192.168.2.11) but when I shutdown the Master DNS my linux client cannot resolve using the slave
any idea way?
This is the named.conf
options
{
query-source port 53;
directory... (9 Replies)
Hi
In Linux I set Secondary Logging in the way below.
1. We perform this by adding below lines into
/root/.bashrcfile :
# secondary logging beginexport HISTSIZE=600000export HISTFILESIZE=600000export HISTTIMEFORMAT="%F %T %z "export HISTFILE=/root/.bashhist/root_history-$(who am i | awk... (4 Replies)
Hi All,
My Servers are enabled with a secondary authentication of login. Whenever we are logging in to the servers with a common id it is asking like something " Enet your personal id and password" which has been created by UNIX admins previously.
Just curious how to achieve this... (1 Reply)
This has got to be the system from hell. Once again, on the RP4440 (after the supplier replaced the entire box due to the bad RTC battery), finally have it all reloaded with the packages the developers need. The last thing is to add the secondary disk to the OS.
BCH sees both OS and secondary... (2 Replies)
Discussion started by: mrmurdock
2 Replies
LEARN ABOUT BSD
cmdk
cmdk(7D) Devices cmdk(7D)NAME
cmdk - common disk driver
SYNOPSIS
cmdk@target, lun : [ partition | slice ]
DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable
disks.
The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk
records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin-
gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit-
ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk.
I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL
error.
Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the
entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area.
Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program.
FILES
/dev/dsk/cndn[s|p]n block device (IDE)
/dev/rdsk/cndn[s|p]n raw device (IDE)
where:
cn controller n
dn lun n (0-7)
sn UNIX system slice n (0-15)
pn fdisk partition(0)
/kernel/drv/cmdk 32-bit kernel module.
/kernel/drv/amd64/cmdk 64-bit kernel module.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
SEE ALSO fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I)SunOS 5.10 9 Oct 2004 cmdk(7D)