openSuse 10.3 , Emulex HBA Post: 302269845

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

HBA compatible on Emulex Lightpulse 9000 with IBM 8840 PKU X346 server.

Hi there, does anybody knows/info on compatiblity on Emulex Lightpulse 9000 with IBM 8840 PKU X346 server. Regards.

2. Solaris

emulex card on solaris 9

Hello, I am new on solaris. We will connect our sun solaris system to the SAN and add 2 Emulex card on the system (solaris 9). Who have already done this and can give me the procedure to follow ? driver to install multipath etc... Thanks in advance Emmanuel

3. UNIX for Advanced & Expert Users

Solaris 10 x86_64 - Emulex Fibrechannel drivers

Hello! I'm having problems to install Emulex fibrechannel card drivers to a HP DL580 G5 running Solaris 10 x86_64. Any of you guys had this problem or knows the answer? =) cfgadm gives me the following info, which seems to say that it is ok? But the card has'nt logged into the switch...

4. Solaris

HBA Card

Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to...

5. Solaris

What is an HBA..?

Helo experts What is an HBA? How can i know about that on any server? Thanx in advance...

6. Solaris

Connect Solaris 10 to NetApp filer using Emulex single port HBAs.

Hi, I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings. Do I need...

7. AIX

Need HBA card driver

Hi All, SUN emulex HBA card has been installed on P520 box. When i run the cfgmgr i am getting the following message. lpar2#cfgmgr cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed....

8. Filesystems, Disks and Memory

HBA performance

Hope I'm in the right place. I'm in the process of zoning HBA's to my new library environment. Is there a "rule of thumb" for the number of physical tape drives that you zone to an HBA? I don't want to run the risk of overloading an HBA. Any information would be greatly appreciated. Thanks.

9. Solaris

Offline HBA.

Hi, I have a HBA that is currently offline for some unknown reason. The device shows up in the prtdiag -v stating it is okay. How can I bring this back online? It was working okay until recently. It is currently connected to the SAN. Details below. # fcinfo hba-port HBA Port WWN:...

10. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :(

LEARN ABOUT DEBIAN

rescan-scsi-bus

RESCAN-SCSI-BUS.SH(8)					      System Manager's Manual					     RESCAN-SCSI-BUS.SH(8)

NAME

       rescan-scsi-bus.sh - rescan the SCSI bus.

SYNOPSIS

       rescan-scsi-bus.sh [ -l ] [ -w ] [ -c ] [ -r ] [ host...  ]

DESCRIPTION

       rescan-scsi-bus.sh is a program that is used to rescan the SCSI bus using the SCSI add-single-device feature of the Linux SCSI layer.

OPTIONS

       -l     Activates scanning for LUNs 0 .. 7 (default: 0).

       -L NUM Activates scanning for LUNs 0 .. LUN (default: 0).

       --luns=LIST
	      Scan only LUNs in LIST.

       -w     Enables scanning for device IDs 0 .. 15 (default: 0 .. 7).

       --ids=LIST
	      Scan only device IDs in LIST.

       -i, --issue-lip
	      Issue a FibreChannel LIP reset (default: disabled).

       -r, --remove
	      Enables removing of devices (default: disabled).

       --forceremove
	      Remove and readd every device (dangerous).

       -c     Enables scanning of channels 0 1 (default: 0).

       --channels=LIST
	      Scan only channels in LIST.

       host, --hosts=LIST
	      If host adapters are given, only these are scanned (default: all).

       --nooptscan
	      Don't stop looking for LUNs if 0 is not found.

       --color
	      Use coloured prefixes OLD/NEW/DEL.

       LIST is a comma separated list of single values and ranges (no spaces allowed), e.g. 0,2-3,8,10-15.

AUTHOR

       rescan-scsi-bus.sh was written by Kurt Garloff <garloff@suse.de>.

COPYRIGHT

       This  program  is free software. You can use it under the terms of the GNU GPL (General Public License) Version 2 (or any later version, at
       your option).  Note, that the GNU GPL implies, that there is NO WARRANTY at all.  Full text of the GPL can be found  in	/usr/share/common-
       licenses/GPL file.

AVAILABILITY

       rescan-scsi-bus.sh is available from
       http://www.garloff.de/kurt/linux/scsidev/

								    March 1998						     RESCAN-SCSI-BUS.SH(8)

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

HBA compatible on Emulex Lightpulse 9000 with IBM 8840 PKU X346 server.

Discussion started by: gagasan_makmur

2. Solaris

emulex card on solaris 9

Discussion started by: emma32

3. UNIX for Advanced & Expert Users

Solaris 10 x86_64 - Emulex Fibrechannel drivers

Discussion started by: Esaia

4. Solaris

HBA Card

Discussion started by: xiaochensg