12-17-2008
gwhelan,
I believe reborg is right, WWNN should allow you to find a match between host and the filer.
Try the following command on Solaris:
> cfgadm -al -o show_FCP_dev <
this will show you WWN and LUNs visible from your server.
Going Veritas afaik
> vxdisk -e list <
shows Veritas disk names and system disk names.
On the filer it's easy, try the
fcp show initiator
lun show -m
igroup show
10 More Discussions You Might Find Interesting
1. Solaris
All solaris rescue gurus out there ....
I've a Solaris 2.6 E450 on which my sysadmin guy has deleted every file (not sub-directories) from the /etc directory.
The machine is (was) running Vxvm with the root volume encapsulated.
I've tried booting from CDROM, mounting the root volume... (3 Replies)
Discussion started by: andy11983
3 Replies
2. Solaris
Is there a way to create "softpartitions" with Veritas Volume Manager?
I have a bunch of disks and i want to create a RAID 5 with them. On that RAID5, i want to split that RAID into two separated file systems like i could do it with SDS/LVM or ZFS, but i don't want to create two RAID5 in the... (3 Replies)
Discussion started by: pressy
3 Replies
3. Solaris
Hi all,
I have a compatibly issues with a new hardware
My config is the following one :
Solaris 10
V490 Hardware
2 X HBA Qlogic 2310f cards
An HP EVA 5000 for storage ...
Veritas VxVM 4.1 MP1
When I reboot my server, VxVM is trying to mount/use the volume before it's... (0 Replies)
Discussion started by: unclefab
0 Replies
4. Filesystems, Disks and Memory
whats the command line to find vxvm (veritas volume manager) version installed in solaris OS? (3 Replies)
Discussion started by: na75369
3 Replies
5. Solaris
Hi Friends,
This is suresh reddy. Recently i download veritas cluster & volume manager package from internet. I didn't found any key inside the package. If any body having the VxVM key kindly send to me.
mail id: cvsureshreddy@gmail.com
Regards,
C V Suresh Reddy (1 Reply)
Discussion started by: suresha2lu
1 Replies
6. Solaris
Hi,
Could any one tel me VxVM simulator is available in market or can it be downloaded from any were???? (4 Replies)
Discussion started by: sudhan143
4 Replies
7. Solaris
hi all,
how can we check whether vxvm is installed in our system or not in solaris?
Thanks in advance
dinu (4 Replies)
Discussion started by: dinu
4 Replies
8. Solaris
This is going to mean nothing to most....
I'm working on a E4500 server running Solaris 2.5.1 and VXVM 2.5.5 :eek:
I've replaced the rootmirror and would like to monitor progress of the resync
It's only a 2Gb /partition so it shouldn't take too long.
In later versions
vxtask list
... (5 Replies)
Discussion started by: Martincorneuk
5 Replies
9. Solaris
Hello all,
i try to allocate the same LUN to two server (or more in the future)
i use solaris 10, vxvm (vxfs) for data and solaris zones and EMC DMX-4, i try to migrate solaris zones between servers in case of problem.
and this is what i want to do
- affect LUN to srv00124 and srv10155
-... (5 Replies)
Discussion started by: mat_solaris
5 Replies
10. Solaris
Hello,
I was assigned some Solaris machines and need to patch them to N-1, where N is the latest OS realease, which means, upgrade till one version before the latest one.
I do not now a lot about Solaris. What I only know is that need to make use of live upgrade and be careful with VxVM... (4 Replies)
Discussion started by: feroccimx
4 Replies
TGTADM(8) System Management Commands TGTADM(8)
NAME
tgtadm - Linux SCSI Target Administration Utility.
SYNOPSIS
tgtadm --lld [driver] --op [operation] --mode [mode] [OPTION]...
DESCRIPTION
tgtadm is used to monitor and modify everything about Linux SCSI target software: targets, volumes, etc.
OPTIONS
--lld [driver] --op new --mode target --tid=[id] --targetname [name]
add a new target with [id] and [name].
--lld [driver] --op delete --mode target --tid=[id]
delete specific target with [id]. The target must have no active I_T nexus.
--lld [driver] --op show --mode target
show all the targets.
--lld [driver] --op show --mode target --tid=[id]
show target parameters of a target with [id].
--lld [driver] --op new --mode=logicalunit --tid=[id] --lun=[lun] --backing-store [path]
add a new logical unit with [lun] to specific target with [id]. The logical unit is offered to the initiators. [path] must be block device
files (including LVM and RAID devices) or regular files. lun0 is reserved for a special device automatically created.
--lld [driver] --op delete --mode=logicalunit --tid=[id] --lun=[lun]
delete specific logical unit with [lun] that the target with [id] has.
--lld [driver] --op bind --mode=target --tid=[id] --initiator-address=[address]
add the address to the access lists of the target with [id]. Initiators with the address can access to the target. 'ALL' is a special
address to allow all initiators to access to a target.
--lld [driver] --op unbind --mode=target --tid=[id] --initiator-address=[address]
delete the address from the access lists of the target with [id].
--lld [driver] --op update --mode=target --tid=[id] --name=[parameter] --value=[value]
change the value of [parameter] of the target with [id] to [value].
--version
display version and exit
--help
display a list of available options and exits
REPORTING BUGS
Report bugs to <stgt-devel@lists.berlios.de>
System Management Commands 2007-06-20 TGTADM(8)