That is how I implemented it, could be done simpler.
Cron needs to be shut down and restarted before the mod takes effect. Or the system rebooted.
I tried to put /etc/shutdown -r now in a shell script and have cron run that, but the system didn't boot. Should I just call /etc/reboot from cron directly like
Thanks.
Running SCO 5.0.5 with all the updates available on a Compaq 800 and just ran into this problem of the printer that is hooked up to /dev/lp0 &or /dev/lp. The printer has been working fine for 5 plus years and still works on another machine. I've uninstalled & re-installed the parallel port and... (0 Replies)
Dear sir,
I am using sco open server 5.06.How we can reboot the system without using root password? Whar are the permision need to change to do this.
Thanks,
Mostafizur Rahman (3 Replies)
Below is the startup/stop script for vncservers by end-user.
How can xhost + command include in this script?
Please help. Thank you.
#!/bin/sh
#
# Startup/Stop script for vncservers for some users.
#
case "$1" in
'start')
/bin/rm /tmp/.X11-unix/X0
/bin/su - applprod -c... (0 Replies)
Hi all,
I have 3 Sun v490's running Solaris 10. Each one has 2 zones on it. I changed the IP address and configuration on them this weekend, where ce0 was once the primary IP nic, now ce2 is. Previously, ce0 and ce4 were set up with IP multipathing, but I tried to remove that by changing the... (2 Replies)
Hi,
We are using SCO UNIX 7.1.3 and the server recently started rebooting by itself.
Do anyone know how can i create a dump or crash dump while the server rebooots?
Your quick help on this is really appreciated.
Regards,
Ravikumar R (1 Reply)
OS: SCO Openr Server 6.0 MP4
HW: Dell R710 Server
When I try to login to the console, the login prompt keeps filling with *
even when I presss enter after the password prompt the login starts filling automatically with the multiple asterisks. This is happening on the console only and if I... (0 Replies)
Hi Guys!!
I am trying to get around the complex situation, i have a task to complete, Like to setup the remote SSH key automatically by providing the root login details, ip and ssh port once to the script input and once its tested and accepted the next ssh should be password less,
script... (0 Replies)
Hello Guys - I need to disable xen server not to start when the server is rebooted.
1) What is the parameter to be used to do this..below is the entry in my config file...
on_reboot = "restart"
2) What is the default behaviors of the xen on reboot ? in case we comment this line from config... (0 Replies)
so here's teh deal:
Solaris 11.3 zone created from a template created by configuring a zone, running sysconfig unconfigure on it and then saved by a zfs send and receive.
create the new zoneconfig, import the template FS using zfs recieve. Now everytime we reboot the new zone it makes us do... (0 Replies)
Discussion started by: os2mac
0 Replies
LEARN ABOUT OSF1
reboot
reboot(8) System Manager's Manual reboot(8)NAME
reboot - Restarts the machine
SYNOPSIS
/usr/sbin/reboot [-dlnq]
DESCRIPTION
When the system is running and multiple users are logged in, use the shutdown -r command to perform a reboot operation. If no users are
logged in, use the reboot command.
The reboot command normally stops all running processes, syncs the disks, logs the reboot, and writes a shutdown entry in the login
accounting file, /var/adm/wtmp.
The reboot command uses the sync call to synchronize the disks, and to perform other shutdown activities such as resynchronizing the hard-
ware time-of-day clock. After these activities, the system reboots. By default, the system starts and the file systems are automatically
checked. If the start-up activities are successful, the system comes up in the default run-level.
You must have root privileges to use this command. Using the -n flag can result in file system damage.
FLAGS
Generates a crash dump of the system before halting it. Can be used with any of the other flags. Does not log the reboot using syslog
Does not sync the disks or log the reboot using syslog Performs a quick reboot without first shutting down running processes; does not log
the reboot using syslog
EXAMPLES
To enable the default reboot action, enter: reboot This command causes the system to stop all running processes, sync the disks, log the
shutdown, and perform other routine shutdown and reboot activities. To shut down the system without logging the reboot, enter: reboot -l
This command shuts down the system and performs all shutdown and reboot activities, except logging the shutdown. To reboot the system
abruptly, enter: reboot -q This command reboots the system abruptly without shutting down running processes.
FILES
Specifies the command path Specifies the login accounting file Specifies the path of the syslog daemon
RELATED INFORMATION
Commands: fsck(8), halt(8), init(8), savecore(8)shutdown(8), syslogd(8)
Functions: reboot(2), sync(2), syslog(3) delim off
reboot(8)