With no meaning to be offensive or rude, but :"I was recently assigned to be network administrator where I work" - the network admins I know have at least two certifications and many years of studying, practicing, etc. Being a netadmin is a bit different from being sysadmin or a programmer, so my point is that this reassignment doesn't speak good for your employer. But since you're in the jam already, let's try to help you.
You say that you can't get utorrent to work, usually torrent clients require some ports opened for P2P communication. There are lot of devices mentioned in your post - do you have access to all of them, for example to check any ACLs, firewalls ? Start with a simple telnet session probe to the destination IP, as in :
- check the response and let us know, certainly, replace the respective IP address and port number. For port scanning, you can consider using nmap.
hi all
1) how to determine available ports in a box (solaris)
do i have to go for a netstat on all the ports?
2) how to block a particular port for a particular type of connection.
Any help would be greatly appreciated
Thanks (7 Replies)
Hi folks!
We have SCO Open System V 5.0.5 here.
When I type "netstat -n" I found a line mentioning a conection at the port 1025, as follows:
tcp 0 0 quartzo.1025 200-203-8-90.csl.aas ESTABLISHED
Here we use only conections thru ports 22,23 and 25. I would like to... (0 Replies)
Hello,
I have a script where I get the full directory path of the script being executed:
BASE=$0
echo "BASE:" $BASE
The output looks like this:
BASE: /webapps/appsdev/ACURA/rlz/oses3.sh
I'd like to truncate the shell name, leaving just the directory path. The directory path can be... (2 Replies)
I got the following code, it partially works. Can someone tell me why it partially doenst work?
#!/bin/sh
file=$1
if
then
echo "File is a directory"
else
echo "File is not a directory!"
fi
heres the output:
philip@philip-laptop:~/Desktop$ sh exFive.sh test.java
File is... (4 Replies)
Hi guys
I have a bunch of x4100's x4140's etc with solaris 10 update4 running on them but I suspect that when a lot of these boxes were originally built, the jumpstart process used an update2 miniroot, now as far as i understand it, the miniroot used at jumpstart is the miniroot that stays on... (1 Reply)
Hi,
I want to block all outgoing connection ( the IMAP ) to my exchnage . I have to do it in my solaris server; from solaris host no outgoing connection can be made to the imap server.
Please help me to configure that.
I am new in solaris.
Kind regards,
Akhtar (2 Replies)
Hi,
I went to a computer store and the salesman sold me a SATA cable and told me that all SATA cables are the same. Another salesman at a different store told me a cable rated for SATA 2, which I bought, MIGHT work as well as one rate for SATA 3 but it is not guaranteed. I decided to run a... (3 Replies)
among the below socket programming api's, please let me know which are blocking and non-blocking.
socket
accept
bind
listen
write
read
close (2 Replies)
Discussion started by: VSSajjan
2 Replies
LEARN ABOUT SUSE
aseqnet
aseqnet(1) General Commands Manual aseqnet(1)NAME
aseqnet - ALSA sequencer connectors over network
SYNOPSIS
aseqnet [remotehost]
DESCRIPTION
aseqnet is an ALSA sequencer client which sends and receives event packets over network. Suppose two hosts connected by network, hostA as
a server and hostB as a client. The ALSA sequencer system must be running on both hosts. For creating the server port, run the following
on hostA:
hostA% aseqnet
sequencer opened: 128:0
Then a user client 128 with port 0 was opened on hostA. (The client number may vary.) For creating the (network-)client port, run aseqnet
with the hostname of the server:
hostB% aseqnet hostA
sequencer opened: 132:0
Now all events sent to hostA:128:0 are transferred to hostB:132:0, and vice versa.
The ports created by aseqnet can be connected arbitrary to other sequencer ports via aconnect(1). For example, to connect hostB:132:0 to a
MIDI output device 65:0:
hostB% aconnect 132:0 65:0
Then events to hostA:128:0 will be delivered to hostB:65:0. The following command plays MIDI on hostB.
hostA% pmidi -p 128:0 foo.mid
The multiple clients may exist simultaneously. If hostC is connected as a client to hostA, events from from hostA are sent to all con-
nected network clients, i.e. hostB and hostC. However, only one connection is allowed from a client to a server.
To disconnect network, stop all clients before server by ctrl-C or sending signal to them. The server will automatically quit.
OPTIONS -p port
Specify the TCP port number or TCP service name.
-s addr
Subscribe to the given address for read automatically.
-d addr
Subscribe to the given address for write automatically.
-v Verbose mode.
SEE ALSO aconnect(1), pmidi(1)AUTHOR
Takashi Iwai <tiwai@suse.de>.
January 1, 2000 aseqnet(1)