Sponsored Content
Operating Systems Solaris Puzzled over over the relationship between the partition and geometry of hard disk. Post 302265506 by just.srad on Sunday 7th of December 2008 06:57:18 PM
Old 12-07-2008
Question Puzzled over over the relationship between the partition and geometry of hard disk.

Not sure why solaris couldn't detect the geometry of a hard disk which has a working OS of winxp pro.

Is it due to the different OS that the partition information is stored in different location?

When I type '"format" it is shown as below,

c3d1 < drive type unknown>
/pci@0,0/pci-ide@1f,1/ide@0/cmdk@1,0

I was quite puzzled, since it is unknown to Solaris, that means, Solaris wouldn't know the disk structure, however, i could mount it as ntfs-3g and copy files onto it.

Anyone here can explain this and would be much appreciated!


Thanks...
 

8 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Hard-disk partition is Full problem?

HI, Currently I am working in One of the webhosting company and I found on one of my server "/home" partition is getting full say 105% usage... But when I actually check the partition size using "du -h", exact partition utilization is only 60-70%. So... (1 Reply)
Discussion started by: jagdish.machhi@
1 Replies

2. UNIX for Advanced & Expert Users

Mirroring Disk Geometry

How can one mirror disk geometry from one hard disk to another in Solaris. Is disk snapshot same as a mirror? Pls explain. (3 Replies)
Discussion started by: lexusujx
3 Replies

3. SCO

declare disk driver for IDE hard disk

hi I've a fresh installation of SCO 5.0.7 on the IDE hard disk. For SCSI hard disk I can declare, for example blc disk driver using: # mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk? (3 Replies)
Discussion started by: ccc
3 Replies

4. Solaris

Replacing a hard disk (SVM) with a soft partition?

The following is the summarry:- 1) Four disks in server ie (c1t0d0. c1t1d0, c1t2d0, c1t3d0). c1t2d0 is the disk to be replaced. c1t0d0 and c1t2d0 are mirrors. c1t1d0 and c1t3d0 are mirrors. Metadb to be deleted is in c1t2d0s7 a) Mirror d35 has 2 submirrors d38 and d39 d38 is a stripe... (0 Replies)
Discussion started by: aji1729
0 Replies

5. Linux

C++ Code to Access Linux Hard Disk Sectors (with a LoopBack Virtual Hard Disk)

Hi all, I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
Discussion started by: shen747
23 Replies

6. UNIX for Dummies Questions & Answers

Does formatting slice 2 (backup) destroy disk geometry?

I am a new Unix Sys Admin who is learning mostly from books with minimal classroom training (ie: no certificates, training is largely hands-on, conducted at work). I work with Solaris 8 through 10, and with some fairly outdated hardware. In my work restoring old workstations I have been instructed... (2 Replies)
Discussion started by: mia-chan
2 Replies

7. Windows & DOS: Issues & Discussions

Hard disk partition on Original windows 7 Home Premium

Respected Members, I am using compaq CQ41, with factory install windows 7, there is three drives namely (local Disk( c: ) 158 GB free of 281 GB), (RECOVERY( D: ) 2.69 GB free of 16.7GB) and (HP_TOOLS( E: ) 92.7 MB free of 99.3 MB). i don't want to lost it,but... (2 Replies)
Discussion started by: Vijay Tyagi
2 Replies

8. Filesystems, Disks and Memory

Ask concept soft partition vs hard partition

Hi Experts I would like to know different between soft partition concept and hard partition concept on solaris. Here is little explanation between soft partition concept and hard partition concept on solaris. Soft Partition: 1TB total space available in storage in all mapped to the OS to... (2 Replies)
Discussion started by: edydsuranta
2 Replies
cmdk(7D)							      Devices								  cmdk(7D)

NAME
cmdk - common disk driver SYNOPSIS
cmdk@target, lun : [ partition | slice ] DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable disks. The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin- gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit- ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk. I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL error. Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area. Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program. FILES
/dev/dsk/cndn[s|p]n block device (IDE) /dev/rdsk/cndn[s|p]n raw device (IDE) where: cn controller n dn lun n (0-7) sn UNIX system slice n (0-15) pn fdisk partition(0) /kernel/drv/cmdk 32-bit kernel module. /kernel/drv/amd64/cmdk 64-bit kernel module. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I) SunOS 5.10 9 Oct 2004 cmdk(7D)
All times are GMT -4. The time now is 05:42 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy