IPMP config Post: 302261812

Sponsored Content

Operating Systems Solaris IPMP config Post 302261812 by jegaraman on Tuesday 25th of November 2008 02:37:23 PM

11-25-2008

Registered User

IPMP config

Hi All,

I have unplumbed one interface.

after that ifconfig -a shows that

lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 169.175.39.35 netmask ffffff00 broadcast 169.175.39.255
groupname ipmpgroup
ether 0:14:4f:81:a4:52
e1000g0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 0.0.0.0 netmask ff000000
e1000g0:2: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 2
inet 169.175.39.98 netmask ffffff00 broadcast 169.175.39.255
e1000g0:3: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 169.175.39.98 netmask ffffff00 broadcast 169.175.39.255
ifconfig: foreachinterface: SIOCGLIFADDR: e1000g3: no such interface

====================================================

i# ifconfig e1000g3 plumb up
ifconfig: SIOCSLIFNAME for ip: e1000g3: already exists
ifconfig: setifflags: SIOCGLIFFLAGS: e1000g3: no such interface

Kindly let me know if you have any ideas on this
Rj

jegaraman

View Public Profile for jegaraman

Find all posts by jegaraman

10 More Discussions You Might Find Interesting

1. Solaris

IPMP/zones config how for this case ,urgent

Hi I am setting up a test server for actual 2 node servers which will be behind load balancer. I will not be using sun cluster at all. The test machine is installed with solaris 10. I am not sure how to setup a test env of 2 nodes on only 1 node..may be creating 2 zones on test server will...

2. Solaris

Ipmp

Hi All, Kindly help me in configuring IPMP or guid me to some link, tried goggling however no luck. Thanks in anticipation

3. Solaris

IPMP questions

Probe-based IPMP active - active Probe-based IPMP active - passive Link-based only active -standby ???? What are differences between Probe-based IPMP active - passive anddd Link-based only active -standby ???!!! For example in active active probe-based IPMP there are lets...

4. Shell Programming and Scripting

parsing config file to create new config files

Hi, I want to use a config file as the base file and parse over the values of country and city parameters in the config file and generate separate config files as explained below. I will be using the config file as mentioned below: (config.txt) country:a,b city:1,2 type:b1...

5. Solaris

ipmp testing

Please tell me how to configure IPMP in vmware what is the basic working concept of IPMP. please help me

6. Solaris

IPMP problem

Hi all i had two interface ce0 and ce5 but when i run the ifconfig, it show me alot of extra virtual interface, may i know how to remove it? # ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 ce0:...

7. Shell Programming and Scripting

Shell script that will compare two config files and produce 2 outputs 1)actual config file 2)report

Hi I am new to shell scripting. There is a requirement to write a shell script to meet follwing needs.Prompt reply shall be highly appreciated. script that will compare two config files and produce 2 outputs - actual config file and a report indicating changes made. OS :Susi linux ver 10.3. ...

8. Solaris

Solaris IPMP

Can any one please explain me the concept behind IPMP in solaris clustering.Basic explanation would be really appreciated... Thanks in Advance vks

9. Solaris

Can't login using ssh after IPMP config.

Dear All, After configuring IPMP in 2 fresh Servers (T5520 and T2000) I can't login in any of them using SSH, I can login by serial console then I had to enable Telnet to access. IPMP works fine. This is the error in /var/adm/messages: sshd: Failed password for lvalle from 172.28.12.95 port...

10. Red Hat

Apache virtual host config vs global config problem

Hi folks, I am trying to configure Apache webserver and also a virtual host inside this webserver. For Global server config: /var/www/html/index.html For virtual host config: /var/www/virtual/index.html Both client10 & www10 are pointing to 192.168.122.10 IP address. BUT, MY...

LEARN ABOUT REDHAT

unbound-checkconf

unbound-checkconf(8)						  unbound 1.4.17					      unbound-checkconf(8)

NAME

       unbound-checkconf - Check unbound configuration file for errors.

SYNOPSIS

       unbound-checkconf [-h] [-o option] [cfgfile]

DESCRIPTION

       Unbound-checkconf  checks  the  configuration  file for the unbound(8) DNS resolver for syntax and other errors.  The config file syntax is
       described in unbound.conf(5).

       The available options are:

       -h     Show the version and commandline option help.

       -o option
	      If given, after checking the config file the value of this option is printed to stdout.  For "" (disabled) options an empty line	is
	      printed.

       cfgfile
	      The config file to read with settings for unbound. It is checked.  If omitted, the config file at the default location is checked.

EXIT CODE

       The unbound-checkconf program exits with status code 1 on error, 0 for a correct config file.

FILES

       /etc/unbound/unbound.conf
	      unbound configuration file.

SEE ALSO

       unbound.conf(5), unbound(8).

NLnet Labs							   May 24, 2012 					      unbound-checkconf(8)

10 More Discussions You Might Find Interesting

1. Solaris

IPMP/zones config how for this case ,urgent

Discussion started by: upengan78

2. Solaris

Ipmp

Discussion started by: kumarmani

3. Solaris

IPMP questions

Discussion started by: samar

4. Shell Programming and Scripting

parsing config file to create new config files

Discussion started by: clazzic