11-20-2008
Quote:
Originally Posted by
shockneck
Autostart of an LPAR should not result in any problems as long as every resource the LPAR needs is available at boottime. As long as you use dedicated disk and adapter devices from your p4/p5whatever this should almost never be a problem. However, I have seen this being a problem with VIO and SAN disk devices that where not accessible in time. I.e. make sure that you set up your environment in a way that there are no potential obstacles in the LPAR's boot process.
Thanks Shockneck!
I wanted to reply earlier but I was out with a fever.
10 More Discussions You Might Find Interesting
1. Solaris
hi, i'm a newbie in UNIX. i have a disk crash and re-install the unix. But the new installation does not boot the server automatically. Then i set the auto-boot to true, and it's ok. But now the system is booting in text mode.
Before this, when i type boot, the system is booting in GUI mode.... (2 Replies)
Discussion started by: lwll
2 Replies
2. HP-UX
On HP-UX, we add some our autostart scripts in the system script under /sbin/rc*.d directory. The output of application is redirected to /dev/null in our script,but once the application has been startup with the OS starting,its ouput is redirected to the /etc/rc.log finally and cause the rc.log... (2 Replies)
Discussion started by: Frank2004
2 Replies
3. UNIX and Linux Applications
I have developed a CD that runs both Windows and Mac software. I would like it to function as an autorun/autostart; I do not have a problem with the Windows code, but I do for the Mac. I do not feel like investing a couple of hundred $$$ into software, when, I am sure that several lines of UNIX... (2 Replies)
Discussion started by: HornetDr
2 Replies
4. HP-UX
Hi All,
I am running HP-UX 11i v2. I installed oracle 10g over it. I was having a startup script from oracle 8i which i modified and copied in /sbin/init.d . In /etc/oratab also I did "Y" for autostart. But still the script isn't starting oracle. As such if i run script from shell prompt, it... (1 Reply)
Discussion started by: ankurjain
1 Replies
5. AIX
Hi,
I want to modify some of the services/processes (related to the oracle database) to start automatically at the startup of the server.
which commands may help me?
which commands do I need to use?
my server configuration is, in brief:
hardware:IBM P550 / OS : AIX 5300
thanks,... (1 Reply)
Discussion started by: talipk
1 Replies
6. Solaris
Could not find a good explanation that was Solaris specified. Need to add MySQL to start up on system startup or restart. I was gone for a few days from work and someone decided to relocate the server. When it came back up, of course mysql was down.
On my previous linux systems I always just had... (2 Replies)
Discussion started by: ippy98
2 Replies
7. AIX
Hi all,
I have the following configuration
2 ds3524 storage disk systems located over 2 locations
2 P720 server located over 2 locations
DS3524 are connected to san switch.
Each vio server has 1 fc adapter attached to a san switch.
per p720 server 2 virtual io servers. Vio 1 has 1 lun... (2 Replies)
Discussion started by: markiemark
2 Replies
8. Programming
I need script that to start the stopped service when its stopped.
This script always controls status of service. For example nagios service stopped script have to start nagios service. And It can send an email for notification when stopped. (6 Replies)
Discussion started by: getrue
6 Replies
9. AIX
Hello,
AIX 6.1
sshd worked fine.
Then I upgraded my AIX from 6100-02-04-0920 to 6100-03-10-1119 successfully(no errors, nothing unusual). After reboot sshd was not started, 3 errors in errpt:
# lssrc -s sshd
Subsystem Group PID Status
sshd ssh ... (0 Replies)
Discussion started by: vilius
0 Replies
10. AIX
There can be configurations in IBM Server wherein a
standalone partition is created on some supported IBM Server
Or
A VIOS - VIOC LPARs created.
Now in both cases they are lpars. But if I want to differentiate b/w a standalone LPAR vs an VIOC LPAR how can I do..?
On a... (2 Replies)
Discussion started by: Manish00712
2 Replies
LEARN ABOUT CENTOS
iprupdate
IPRUPDATE(8) System Manager's Manual IPRUPDATE(8)
NAME
iprupdate - IBM Power RAID adapter/device microcode update utility
SYNOPSIS
iprupdate
iprupdate --debug --check_only --daemon --use-polling --use-uevents
DESCRIPTION
iprupdate is used to update the microcode on IBM storage adapters and the disk units attached to them to a minimum supported level. It can
be run at any time while the ipr device driver is loaded. The utility will check the microcode revision level of each storage adapter/disk
unit on the system and compare it to the microcode revision level that is installed in /etc/microcode, /usr/lib/microcode, and
/lib/firmware. If the microcode level on the adapter/device is below the minimum supported level and the level of the latest image is
newer, the microcode will be updated to the latest level available. It is desired that this be called in the boot process.
OPTIONS
--version
Print the version number of iprupdate
--debug
Enable additional error logging. Enabling this will result in additional errors logging to /var/log/messages.
--check_only
Check if any adapters or disk units are below their minimum supported level.
--daemon
Run as a daemon to handle adapters and devices being hotplugged.
--use-polling
Do not use netlink/uevent notification, but rather poll for adapter and device configuration changes.
--use-uevents
Use netlink/uevent notification rather than polling for adapter and device configuration changes. If not specified, polling will be
used until the first uevent notification appears, then netlink will be used.
AUTHOR
Brian King (brking@us.ibm.com)
February 2005 IPRUPDATE(8)