11-18-2008
Autostart of an LPAR should not result in any problems as long as every resource the LPAR needs is available at boottime. As long as you use dedicated disk and adapter devices from your p4/p5whatever this should almost never be a problem. However, I have seen this being a problem with VIO and SAN disk devices that where not accessible in time. I.e. make sure that you set up your environment in a way that there are no potential obstacles in the LPAR's boot process.
10 More Discussions You Might Find Interesting
1. Solaris
hi, i'm a newbie in UNIX. i have a disk crash and re-install the unix. But the new installation does not boot the server automatically. Then i set the auto-boot to true, and it's ok. But now the system is booting in text mode.
Before this, when i type boot, the system is booting in GUI mode.... (2 Replies)
Discussion started by: lwll
2 Replies
2. HP-UX
On HP-UX, we add some our autostart scripts in the system script under /sbin/rc*.d directory. The output of application is redirected to /dev/null in our script,but once the application has been startup with the OS starting,its ouput is redirected to the /etc/rc.log finally and cause the rc.log... (2 Replies)
Discussion started by: Frank2004
2 Replies
3. UNIX and Linux Applications
I have developed a CD that runs both Windows and Mac software. I would like it to function as an autorun/autostart; I do not have a problem with the Windows code, but I do for the Mac. I do not feel like investing a couple of hundred $$$ into software, when, I am sure that several lines of UNIX... (2 Replies)
Discussion started by: HornetDr
2 Replies
4. HP-UX
Hi All,
I am running HP-UX 11i v2. I installed oracle 10g over it. I was having a startup script from oracle 8i which i modified and copied in /sbin/init.d . In /etc/oratab also I did "Y" for autostart. But still the script isn't starting oracle. As such if i run script from shell prompt, it... (1 Reply)
Discussion started by: ankurjain
1 Replies
5. AIX
Hi,
I want to modify some of the services/processes (related to the oracle database) to start automatically at the startup of the server.
which commands may help me?
which commands do I need to use?
my server configuration is, in brief:
hardware:IBM P550 / OS : AIX 5300
thanks,... (1 Reply)
Discussion started by: talipk
1 Replies
6. Solaris
Could not find a good explanation that was Solaris specified. Need to add MySQL to start up on system startup or restart. I was gone for a few days from work and someone decided to relocate the server. When it came back up, of course mysql was down.
On my previous linux systems I always just had... (2 Replies)
Discussion started by: ippy98
2 Replies
7. AIX
Hi all,
I have the following configuration
2 ds3524 storage disk systems located over 2 locations
2 P720 server located over 2 locations
DS3524 are connected to san switch.
Each vio server has 1 fc adapter attached to a san switch.
per p720 server 2 virtual io servers. Vio 1 has 1 lun... (2 Replies)
Discussion started by: markiemark
2 Replies
8. Programming
I need script that to start the stopped service when its stopped.
This script always controls status of service. For example nagios service stopped script have to start nagios service. And It can send an email for notification when stopped. (6 Replies)
Discussion started by: getrue
6 Replies
9. AIX
Hello,
AIX 6.1
sshd worked fine.
Then I upgraded my AIX from 6100-02-04-0920 to 6100-03-10-1119 successfully(no errors, nothing unusual). After reboot sshd was not started, 3 errors in errpt:
# lssrc -s sshd
Subsystem Group PID Status
sshd ssh ... (0 Replies)
Discussion started by: vilius
0 Replies
10. AIX
There can be configurations in IBM Server wherein a
standalone partition is created on some supported IBM Server
Or
A VIOS - VIOC LPARs created.
Now in both cases they are lpars. But if I want to differentiate b/w a standalone LPAR vs an VIOC LPAR how can I do..?
On a... (2 Replies)
Discussion started by: Manish00712
2 Replies
ypinit(1M) System Administration Commands ypinit(1M)
NAME
ypinit - set up NIS client
SYNOPSIS
/usr/sbin/ypinit [-c] [-m] [-s master_server]
DESCRIPTION
ypinit can be used to set up an NIS client system. You must be the superuser to run this command. This script need not be used at all if
ypbind(1M) is started with the -broadcast option (it is invoked with this option from the svc:/network/nis/client:default service).
Normally, ypinit is run only once after installing the system. It may be run whenever a new NIS server is added to the network or an
existing one is decommissioned.
ypinit prompts for a list of NIS servers to bind the client to; this list should be ordered from the closest to the furthest server. Each
of these NIS servers must be listed in either the /etc/hosts or the /etc/inet/ipnodes file along with its IP address. ypinit stores the
list in file /var/yp/binding/domain/ypservers. This file is used by ypbind when run without the -broadcast option.
OPTIONS
-c Set up a ypclient system.
-m Build a master ypserver data base.
-s master_server Slave data base. master_server must be the same master configured in the YP maps and returned by the ypwhich -m
command.
FILES
/etc/hosts
/etc/inet/ipnodes
/var/yp/binding/domain/ypservers
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWnisu |
+-----------------------------+-----------------------------+
SEE ALSO
svcs(1), svcadm(1M), ypbind(1M), sysinfo(2), hosts(4), ipnodes(4), attributes(5), smf(5)
NOTES
The NIS client service is managed by the service management facility, smf(5), under the service identifier:
svc:/network/nis/client:default
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser-
vice's status can be queried using the svcs(1) command.
BUGS
ypinit sets up the list of NIS servers only for the current domain on the system when it is run, that is, the domain returned by the
SI_SRPC_DOMAIN command to sysinfo(2). Care should be taken to ensure that this is the same as the desired domain for NIS client processes.
SunOS 5.10 13 Aug 2004 ypinit(1M)