11-18-2008
IP address
Quote:
Originally Posted by
daya.pandit
Hi Experts,
I am new for solaris, i am using Solaris10,can you anyone assist me how to configure IP in my machine.
Thanks
Use ifconfig -a ( to check ip address)
To set ip address use,
ifconfig <interface name> < ip address> netmask <netmask>
ex: ifconfig hme0 10.40.44.2 netmask 255.255.255.0
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
I am trying to configure DAT Tape drive on SUN E220 system but I don't have SUN keyboard. I am using a tty terminal k/b.
What are my alternavtives?
Is there any way to send interupts to the system on OK prompt using tty kb for probe SCSI.
Thanks in advance. (2 Replies)
Discussion started by: s_aamir
2 Replies
2. Solaris
I've installed sun solaris 9 and i need to know how can i enable TCP Keepalive to ping socket connections every 300 seconds?
Thanks,
Mohammed Amin (1 Reply)
Discussion started by: m_amin
1 Replies
3. Solaris
Hi....,
I'm having two intel system.both the system i installed sun sol 10.now i wan't to configure NIS .Pls tell me step by step configuration for server and client.pls Help me any body......... :mad:
Rgds,
Jay (4 Replies)
Discussion started by: rjay.com
4 Replies
4. Solaris
I wanted to configure a second NIC card on a different IP on my Sun E450 server.
Currently, I have hme0.
when I ran the command : ifconfig hme1 <ip address> netmask <subnet mask> broadcast + up
I got the following error message: ifconfig: SIOCGIFFLAGS: hme1: no such interface
Any idea... (3 Replies)
Discussion started by: Remi
3 Replies
5. Linux
Hi All,
I installed the Linux on VMWare. Now i want to configure the NFS.
is that possible to configure NFS ? because i am having only one Machine.
Please give me the details ASAP.
Thanks in advance...
Regards,
Sridhar. (3 Replies)
Discussion started by: sridhusha
3 Replies
6. UNIX for Dummies Questions & Answers
Hi,
I am working in sun solaris server.I have Kyocera FS-1030D KX printer in my network .I have configured this printer for windows.I want to configure same printer to sun solaris.Is this possible.Give me some ideas. (2 Replies)
Discussion started by: arulkumar
2 Replies
7. Ubuntu
Hi,
I need to install the GCC compiler on a my Linus machine.
First step is to run the ./configure command and here we need to specify
./configure --target="target machine name (CPU type-Manufacturer-OS)
or other way would be just give the command ./configure and it guesses the target name... (11 Replies)
Discussion started by: viji19812001
11 Replies
8. Solaris
Hi,
I am configuring the sun cluster between two nodes. It is asking me to create a filesystem called globaldevices in root and mount it permanently. I created a new slice c0t0d0s3 and created a filesytem /globaldevices. How can I mount it permanently. I know we have to do it /etc/vfstab, but... (3 Replies)
Discussion started by: gunnervarma
3 Replies
9. UNIX for Dummies Questions & Answers
I shall explain how to setup PPP on your Linux machine, so that you can connect to the Internet using an external modem and a Dialup connection. This article explains the setup for the superuser alone (Not normal users).My Setup :
My external modem (56kbps) is connected to the Serial Port :... (0 Replies)
Discussion started by: EliteHussar
0 Replies
10. Solaris
My one Sun machine is not able to ssh another machine of Sun. Although I have configured the ssh successfully
( SunOS sunbox2 5.9 Generic_118558-34 sun4u sparc SUNW,Sun-Blade-2500 )
ERROR
bash-2.05# ssh sunbox2
/etc/ssh/ssh_config: line 34: Bad configuration option: PermitRootLogin... (0 Replies)
Discussion started by: z_haseeb
0 Replies
LEARN ABOUT DEBIAN
vlan-interfaces
VLAN-INTERFACES(5) File formats VLAN-INTERFACES(5)
NAME
/etc/network/interfaces (vlan) - vlan extensions for the interfaces(5) file format
DESCRIPTION
/etc/network/interfaces contains network interface configuration information for the ifup(8) and ifdown(8) commands. This manpage
describes the vlan extensions to the standard interfaces(5) file format.
Primary extensions exist to make and destroy vlan interfaces, secondary extensions exist for ipv4 interface manipulation which are gener-
ally needed when using (a lot of) vlans.
VLAN CREATION
Vlan interface definitions exist of the vlan interface name, and an optional 'raw-device' parameter. Vlan interfaces are numbered 1 to
4095. You have the option to have interface names zero-padded to 4 numbers, or just the plain digits without leading zero. The following
example shows four ways to create a vlan with id 1 on interface eth0. They all result in different names.
iface eth0.1 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan1 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
iface eth0.0001 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan0001 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
# We don't have br support out of the box
iface br0.2 inet static
vlan-raw-device br0
address 192.168.1.1
netmask 255.255.255.0
# Aliases are ignored
iface br0.2:1 inet static
address 192.168.1.1
netmask 255.255.255.255
EXTRA IFACE OPTIONS
Usually someone who uses vlans also wants to do some other manipulations with the ip stack or interface.
vlan-raw-device devicename
Indicates the device to create the vlan on. This is ignored when the devicename is part of the vlan interface name.
ip-proxy-arp 0|1
Turn proxy-arp off or on for this specific interface. This also works on plain ethernet like devices.
ip-rp-filter 0|1|2
Set the return path filter for this specific interface. This also works on plain ethernet like devices.
hw-mac-address mac-address
This sets the mac address of the interface before bringing it up. This works on any device that allows setting the hardware address
with the ip command.
AUTHOR
This manpage was adapted from interfaces(5) by Ard van Breemen <ard@kwaak.net>
SEE ALSO
vconfig(8) interfaces(5)
vlan September 30 2007 VLAN-INTERFACES(5)