Programming serial port Post: 302258715

10 More Discussions You Might Find Interesting

1. Programming

Telling apart serial from // port

I'm writing a journal_write() function and I want it to: - be a possible drop in replacement for write() - write entries to the journal ;-) Could be a regular file (journal.txt), a serial printer or a // printer. - handle printer status if needed. fstat() tells weather or not we're dealing with...

2. Linux

urgent......Serial port

I think my serial port(on board) is not working ...... because when I am running same code on two machines its working good....but when my system comes into picture ....it doesnt show any output comming from serial port.......... can anybody tell me how to configure my serial port.........or to...

3. Programming

Serial port programming

I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than...

4. Solaris

Serial port problem

I am working with solaris 9 sparc and I want to connect physical device in serial port but when I am connecting it,It is showing the error window saying-- So can any1 tell me the reason or is there any package I have to add to work with serial port???

5. Programming

How to tell if a string to serial port has been sent

I have a need to determine when a string has been completely sent via a serial port from a standard 'C' application. The code is as follows: SerialPort_Send = open (pPortString, O_WRONLY | O_NOCTTY | O_NONBLOCK); write (SerialPort_Send, pCommandString, strlen (pCommandString)); ...

6. Solaris

Serial port on the T5140

What is the serial port on the T5140 used for.

7. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

8. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

9. Programming

Serial programming using termios

Hi guys I'm trying to connect to CISCO router using termios. So I decided to have two threads one for reading data and the other one for writing data. And here's my code : int mainfd=0; char ch = {NULL}; void *write(void *) { char temp; while(1) { temp =...

10. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT SUSE

gnutls_x509_crt_set_serial

gnutls_x509_crt_set_serial(3)					      gnutls					     gnutls_x509_crt_set_serial(3)

NAME

       gnutls_x509_crt_set_serial - Set the certificate's serial number

SYNOPSIS

       #include <gnutls/x509.h>

       int gnutls_x509_crt_set_serial(gnutls_x509_crt_t cert, const void * serial, size_t serial_size);

ARGUMENTS

       gnutls_x509_crt_t cert
		   a certificate of type gnutls_x509_crt_t

       const void * serial
		   The serial number

       size_t serial_size
		   Holds the size of the serial field.

DESCRIPTION

       This  function  will set the X.509 certificate's serial number.	Serial is not always a 32 or 64bit number.  Some CAs use large serial num-
       bers, thus it may be wise to handle it as something opaque.

RETURNS

       On success, GNUTLS_E_SUCCESS is returned, otherwise a negative error value.

REPORTING BUGS

       Report  bugs  to  <bug-gnutls@gnu.org>.	 GnuTLS  home  page:  http://www.gnu.org/software/gnutls/  General  help   using   GNU	 software:
       http://www.gnu.org/gethelp/

COPYRIGHT

       Copyright (C) 2008 Free Software Foundation.
       Copying	and  distribution  of  this file, with or without modification, are permitted in any medium without royalty provided the copyright
       notice and this notice are preserved.

SEE ALSO

       The full documentation for gnutls is maintained as a Texinfo manual.  If the info and gnutls programs are properly installed at your  site,
       the command

	      info gnutls

       should give you access to the complete manual.

gnutls								       2.8.6					     gnutls_x509_crt_set_serial(3)

10 More Discussions You Might Find Interesting

1. Programming

Telling apart serial from // port

Discussion started by: starless

2. Linux

urgent......Serial port

Discussion started by: arunchaudhary19

3. Programming

Serial port programming

Discussion started by: raj8109

4. Solaris

Serial port problem

Discussion started by: smartgupta